Cruzer Westar Run (rubber & resin)

From what I've gathered (and slavefive will hopefully correct me if I'm wrong), it's actually a specially formulated resin made for a particular studio/prop company in the movie industry, and is not available to the general public.

The closest thing to it that can be purchased by us, but still very far from it as far as density and shore hardness are concerned, would be FlexFoam-iT 25 from Smooth-On.(y)
 
Last edited by a moderator:
Ok, small update time: The first post has been updated with order completion info and will be updated with shipping info over the next few days as orders go out. The completed blasters will begin shipping tomorrow via USPS Priority (2-3 days) & USPS International Priority (6-10 days).(y)

Thank you to everyone for their patience. I really appreciate it as I'm literally a one-man-prop-shop around here that still has to bring home the bacon during the day...and then turns right around and cooks it most nights!!!:lol: Ask my sister, littlebekahc, who frequently drops by for free meals!
 
Ok guys, the remaining orders for regular handles will ship tomorrow. I'll also begin working on the mold for the spinning handles next week.(y)

nsucolonel said:
I CANT WAIT TO GET MY TWO SETS
Click to expand...
They'll go out tomorrow. I hope you don't mind, but I took a little extra time to somewhat upgrade your handles. The paint wasn't holding up on the large screws on the sides of the handles. It started cracking with just me handling them and setting them down. So I drilled them out, repainted, and will install stainless steel button screws which should wear better for you.(y)
 
Small update:

Thanks guys for the feedback, and glad you're satisfied with them.(y)

The last two orders with regular handles shipped this morning and should be arriving by Tuesday.

Tallon_Karrde, I need your shipping info because it wasn't included in your paypal payment.

TB750, thanks for your patience bro and I start the spinning trigger mold next week just for you and Seeker.

Just an f.y.i., I used a coat of aerosol hairspray to seal the Rn'B coat on the last three pairs of my rubber blasters. So if there's anyone who received a pair and the Rn'B still smudges, grab the nearest can of hairspray!:D

If there's any more interest in blasters, I'll take only one more order of each and then I'm going to put the molds away for a while to make time for some gauntlet and backplate work, followed by starting the molds for my leg armor pieces and runs of those.(y)

Thanks goes out to everyone on this run,
Cruzer
 
CRUZER,

JUST WANTED TO LET YOU KNOW I RECIEVED BOTH SETS OF BLASTERS. THEY ARE AMAZING. THANK YOU VERY MUCH FOR THE TIME AND EFFORT YOU PUT INTO THEM.

THANKS,

JASON
 
hey cruzer...leaning towards a pair if you accept any more orders...

i can wait till you come back to them too..no rush. i would want the resin ones

i see you dont offer the extras for them...is there a reaosn why and can the resin be drilled out if i wanted to put them in?

and i may be interested in that backplate order when it comes around as well..lol
 
Last edited by a moderator:
i just wanted to chime in to say that i've got a set of these in resin, and the casting job is absolutely fantastic. the level of detail captured was very impressive.

if i ever get them finished up, they'll look awesome on display with my jango helmet!
 
talon_karrde said:
cruzer, do you have my shipping info? you must have a PM
Click to expand...
Sorry, no shipping info because I gave your blasters to somebody else!:eek: After not hearing from you after a week about your shipping info, I sent your blasters to someone else in order to get them out of my work area. Don't worry, I'll be shipping out your new blasters tomorrow or the next day.(y)

JDFett, the resin can be drilled out. I use my drillpress to drill everything so the holes come out straight. I drilled out everything and included the metal accents for another member. Whenever you're ready for blasters or a backplate, just let me know.(y)

Thanks stormtrooperguy! I'm very satisfied with our trade. The helmet turned out awesome!
 
Last edited by a moderator:
I'm very happy with the blasters.. are amazing!!

High level of detail, the best screen accurate and materials... wow, I don't have many words to say that THANKS FOR THE BEST RESIN JOB I NEVER SEEN

Thanks Cruzer
 
This thread is more than 15 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

KaliFett
Jango Dented helmet by Cruzer.
Replies
7
Views
1,264
Rook 3
Rook 3
dgcook
Westar-34 vs Lost In Space
Replies
3
Views
796
BudaFett
BudaFett
Campii
WIP: Westar 34 Blaster
Replies
2
Views
1,432
Mandalorian Guard
Mandalorian Guard
B
Cruzer Gauntlet Hinge Pins Question
Replies
3
Views
918
Jimbo
Jimbo
DarthBrooks
Full Metal Electronic Westar 34's
2 3
Replies
44
Views
8,401
TI Wingman
TI Wingman

Similar threads

KaliFett
Jango Dented helmet by Cruzer.
Replies
7
Views
1,264
Rook 3
Rook 3
dgcook
Westar-34 vs Lost In Space
Replies
3
Views
796
BudaFett
BudaFett
Campii
WIP: Westar 34 Blaster
Replies
2
Views
1,432
Mandalorian Guard
Mandalorian Guard
B
Cruzer Gauntlet Hinge Pins Question
Replies
3
Views
918
Jimbo
Jimbo
DarthBrooks
Full Metal Electronic Westar 34's
2 3
Replies
44
Views
8,401
TI Wingman
TI Wingman
Back
Top