New Helmet Templates WIP.

Will these .pdo files work in most 3D programs? Are you guys using a cutting machine that maps out the 3d or just printing the pieces and making it that way. This sounds like it will be my next project after I finish my HIC.

I'm unsure if the files will work with any other program than the Pepakura program. The program takes a 3d design and unfolds it so it can be printed on your home printer. Then you cut, fold and assemble the pieces together.
 
You should be able to?? Google "Allzip" It's a zip file extractor that'll open that zip file for you and it's free. ;)

Or you could use "WINZIP" or even "WINRAR"
 
The circular shape with a semi circle on top? Those are supports you can use to help your dome stay in shape while you fibreglass. I didn't use them on my build. ;)
 
Oh I see. Yeah. I'm new to the world of pepakura so I would've never thought it was that. Thanks. I'm Going To build mandalorian armor on November 13 for next years comic con. Don't really think I will use this helmet though. I also have a Mandalorian Rohlan Dyre Helmet PDF. I might make them both. I'm going to make my avatar. Doesn't really matter which helmet. And before I end this reply i should just say. Is a FarScape Pulse Pistol good enough for a mandalorian because thats the closest mandalorian blaster I can find.
 
So do you have to make that missle targeting sight thing on your own? And can you tell me or point out a thread that shows you how to make the visors for everything?
 
which is a better size letter or A4

The Letter and the A4 format should contain the same sized helmet templates, the only difference is that the Letter format (8.5 X 11inch/216 X 279cm) is used mostly in the US, while the A4 format (210 X 297cm/8.27 X 11.69inch) is commonly used in Europe and other countries. You should print the format close to your paper dimensions or you can expect template distortion or wrong dimensions.
 
Hiya all,

I know this thread is a little old, but this is what came up in Google when I searched for a Boba Fett Pepakura file. First of all, thank you so much for making this file freely available to download. I was just wondering about the scaling/sizing of the helmet. From ear to ear my nugget measures 155mm. When I look at the file in Pepakura designer, et mentoins that the helmet is 521mm. But only 270mm high. Can that be right? that is half a meter wide :eek:

Thank you in advance for your reply(y)
 
Last edited by a moderator:
This thread is more than 2 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top