IRONMAN COSTUME. 95% done. TMP

I don't care how much it is, if you make copies of it, I am so getting one. Or two.

Or as many as it takes to re-create all the versions out there.
 
IRONMAN FINISHED!

Here are some more photos of the upper body. I plan to do one like the one hanging in Tony Garage with all the wires coming out.

TMP_Iron Man_costume_upper_body..JPG


TMP_Iron Man_costume_upper_body_BACK..JPG

Missing some gold paint on the back.

TMP_Iron Man_costume_side_phose..JPG


TMP_Iron Man_costume_direct_side_phose..JPG



IRONMAN IN FLIGHT


Well. I had very little proffesional help to get this on. Only my Whife helped and she is not so tecnical and dont know what to look for as far as error. So it does not fit perfectoy as it should. I cry when i se the errors.. Because if i were on the outside it whould have been looking perfect.
I also need to raise the shoulders a bit with some foam to make it stand higher. As some of you noticed i had to paid a pair of Robocop feet red..
I knew it whould not work but its better than nothing. The feet thats in progress will be fairly high in the back with a heal. so i am raised up on the back of my foot and the lowest point by the toes. If you look closely you will se that they did this for Darth Vader ep 3 and the LG photo of Iron Man. The chalange will only be to get shoes with such a high heal.

The neck is not atached. I am adding the ABS sheets in layers on a Stormtrooper neckseal. This way i can move my neck and ont be scratched and the details will look sharp.

The pant i used was of the smaller version. I had two laying arround. And she picked the one that was 2 inch to short on both sides. I could not se this when se put it on. But just to inform the correct sized fits perfect.

The midsection plate is in several layers so it gives actullay great movement.

The legs was also good. I atached them to a belt arround my waist.
I will look into some other belt system as i go on.
I will problably also cut a bit more onto the back of the lower leg in between the joints allowing me to better bend my knee. I can walk stair but it is not easy, especially when you can se the **** legde of the stair.

The gloves.. Well as you se they are in foam rubber. Looking into for futur upgrade to make it in ABS plastic so that is hard as well.

For the chest i had an EL sheet it lights up in darker room. In daylight you cant really se it. For the eyes.. Well ... I almost given up i tried so many things to make them light up and keep the visability. I know from wearing this that YOU NEED CLEAR VISABILITY!!! No compromize.
 
Last edited by a moderator:
WOW!!!:eek: Are going to the San Diego Comic Con this year? If you are, you're gonna be a big hit! Awesome job on the armor dude!:cheers
 
Last edited by a moderator:
Yeay more eye candy! The suit is amazing man. Now you just need to get flying and hook up some rocket launchers. ;)
 
Now I see you all suited up this has to be the best costume build I've ever laid eyes on. An immense undertaking and you've done it with flying colours. Major Kudos to you :)
 
If you don't mind answering this, how much did it cost you do build that suit? You don't have to answer it if you don't want too. I was just curious....lol
 
This thread is more than 13 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top