Interest Thread: PVC Fett PlatesSubscribe
  1. Member Since
    Dec 2012
    Aug 8, 2013, 11:52 PM - Interest Thread: PVC Fett Plates #1

    As I'm sure many of you know, I've been working on my budget Fett build. I made more than half of my plates out of unrolled PVC. After making a few test plates, some people have been impressed, and it has been brought to my attention that there has been a bit of interest in the plates, so I wanted to gauge interest on these.

    I would be offering a 8 piece set. Every piece from this set it shaped by hand, and all edges are beveled smooth. This set includes:
    -1 collar
    -2 chest
    -1 diamond
    -1 ab
    -2 shoulder
    -1 kidney

    He are pictures of my personal set, from start to finish. Not pictured is my diamond, I've lost it... again...

    I bondo over all edges to get that nice edge to imply depth:

    A picture with outdoor lighting:

    And indoor...

    -I like the plates, but Boba is not really my style....
    -That's fine. I can do Jango plates too, with thighs and shins. Haven't tried it, but I can't see why it'd be any different.

    -Do these plates come painted?
    -No, unless you want to pay extra, but that's another story.

    -I like the plates, but I'm a bit larger than a medium...
    -That's fine! Figure out your WOF size, and I can make them to those.

    -I'm making a custom mando, can I not get the dents?
    -Absolutely. Saves me the trouble of making them.

    -Can you ship international?
    -Yes I can.

    -Can I get a pair of knees, a backplate, and a cod plate with this set?
    -Short answer: No.
    -Long answer: I am yet to want to even try to craft a backplate, and have simply cannot get the correct curve of the cod and the knees. My buddy RKD makes them nice and cheap

    -Why should I buy PVC? Why not Fiberglass, or ABS?
    -Because PVC survives. In Manchester, NH, there was a parade a year or two ago that was so cold that ABS started to break, and snap. PVC won't bust under temperature. With fiberglass plates, you run the risk of them dropping, cracking, snapping, and breaking. I can assure you, that you can throw a PVC plate against the ground as hard as you can, and that sucker is going to bounce. Also, the PVC is easy to attach with some velcro, or other methods.


    Prices are as follows, and do not include shipping.

    For an 8 piece, Boba style set, completed with the dents of the version of your choice: $100

    For an 11 piece Jango Set: $125

    For a blank Boba Style set: $90

    And as always, open for Boba trades
  2. Become a member for 90 days and create 50 posts and you won't see these ads.Register now!
  3. Wes7's Avatar
    Member Since
    Feb 2012
    Aug 9, 2013, 1:20 AM - Re: Interest Thread: PVC Fett Plates #2

    If there are any Fetts looking for an alternative vendor than the big names I definitely recommend Bavery!!
  4. Member Since
    May 2013
    Aug 9, 2013, 6:54 PM - Re: Interest Thread: PVC Fett Plates #3

    Wow!!! You are going to sell a ton of these! Great quality and amazing price.
  5. HiredHand's Avatar
    Member Since
    Aug 2011
    Aug 12, 2013, 6:30 AM - Re: Interest Thread: PVC Fett Plates #4

    I am interested in a full set of 8, Any idea of the price?
  6. Member Since
    Dec 2012
    Aug 12, 2013, 3:50 PM - Re: Interest Thread: PVC Fett Plates #5

    Quote HiredHand said: View Post
    I am interested in a full set of 8, Any idea of the price?
    An 8 piece Boba set with dents of your choice is $100+ shipping cheapest and I believe the most durable of the makers I know of.
  7. Member Since
    Dec 2012
    Aug 12, 2013, 9:16 PM - Re: Interest Thread: PVC Fett Plates #6

    So I believe I have collected enough interest to move this into The Cargo Hold. I'll post it there as well!

Similar Threads

  1. Interest in groovy Zam hand plates
    By sl tk8456 in forum Zam Wesell Costume
    Replies: 41
    Last Post: Jun 25, 2007, 8:17 AM
  2. Interest thread Jango Fett ammo belt and pouches
    By SEEKER in forum Jango Fett Costume
    Replies: 5
    Last Post: Mar 29, 2007, 8:22 PM
  3. Budget Fett Blasters interest thread - Update 12/3/03!!!
    By Rimshot in forum Boba Fett Costume
    Replies: 8
    Last Post: Aug 21, 2005, 9:20 PM
  4. Interest Thread: MS McQuarrie Fett Helmet
    By BigaboyFett in forum Boba Fett Helmet
    Replies: 52
    Last Post: Mar 29, 2005, 2:52 PM
  5. Boba Fett Chest Display *Interest Thread* $82.50
    By Vader UK in forum Boba Fett Costume
    Replies: 41
    Last Post: Nov 5, 2003, 6:38 PM