Cardboard Gauntlets WIP

dung0beetle

Active Hunter
gaunt1.gif

gaunt2.gif

gaunt3.gif

I just got started a few hours ago, and I already have all the pieces together on the right one. By-the-way, the rectangular piece on top in the top picture is not crooked, it is the shadow making it look that way.

I don't have pics of the lower clamshell portion, because glue is drying.

I plan on using wallboard joint compound to make the corners more rounded like the screen used version. I am not planning on spending any money building or painting these, so I will have to scrounge for hoses and other greeblies...I think nobody will notice if I snag the one from the refrigerator. :lol:p:lol:
 
I'm making mine from cardboard too. I'm just using spackling to basically cover the outside and then sand it down to make it the connected look of the vac formed ones.

Yours looks awesome! Keep up the good work!
 
Here is my hinge. It is a strip of cardboard that has been cut 1/4 of the way thru, straight down the center of the strip, and folded back and forth on itself while wet. Now that it is dry, there is a v-shaped gap on both sides that is almost as strong as the original cardboard was. It has been glued down with white glue on the flat surfaces, and hot glue on the edges to keep it flush with the edge of the cardboard. I haven't decided what to do to secure it once it is closed.

hinge.gif
 
Looks great -

Q: What type of cardboard are you using - name brand - thickness - where did you find it ???


Q: After assembly of the major parts - do you think that one can apply fiberglass/resin mix over everything - inside and out - and make the whole unit very strong? ( Or even contact cement )
 
Looks great -

Q: What type of cardboard are you using - name brand - thickness - where did you find it ???


Q: After assembly of the major parts - do you think that one can apply fiberglass/resin mix over everything - inside and out - and make the whole unit very strong? ( Or even contact cement )

The cardboard is from a desk calendar approx. 18x24" the brand is Brownline it is about 1.5 mm thick. I got a stack of them from an office supply store. They were free because they were last years calendars.

Yes, you can cover the cardboard with fiberglass resin. I would seal it first with an acrylic seal beforehand, so the cardboard doesn't warp once wet.
 
You are a master!

I take it - you used the templates (posted on TDH) or pretty much made up your own?

Have you found them to be accurate?

Thanks for the info -- I have Sintra in my shop - but it's 1/8 inch thick and when heating it warps a bit -- I believe the 1mm is easier to work with as seen on TDH by another member. But the cardboard is very interesting...
 
I am using the templates provided by Wizardofflight and Mojofett. They are the masters. The corners need to be rounded like the originals, but other than that, they seem to be spot-on. Getting the corners rounded is pretty simple, so there is not much work going into it on my end.
 
I figured out how i want to secure the clamshell pieces...elastic.

I am putting 2" strips of elastic on the open sides, so they will slip on and off easily with no worries of them coming undone while wearing them.

elastic.gif


elastic2.gif


Now they just slip on like socks.:lol:
 
Last edited by a moderator:
I've got the first layer of wallboard joint compound on the right one, and while I am letting it dry, I started the left gauntlet.

gaunt6.gif


Eeew! It's all messy!:p

gaunt7.gif


gaunt4.gif


gaunt5.gif


I've got to get a better camera. :(

From the looks of things, I should be ready for paint by Monday.(y)
 
Great idea with the elastic!!!!!(y) I never really thought of that. Too bad I already bought hinges. I guess I could return them.

I'm using spackling to round corners and such, what are you using brand-wise?
 
Great idea with the elastic!!!!!(y) I never really thought of that. Too bad I already bought hinges. I guess I could return them.

I'm using spackling to round corners and such, what are you using brand-wise?


I am using DAP brand wallboard joint compound. It was left in the house I just moved into...I have 5 gallons of it, I've gotta use it for something! :D

Keep the hinges, they will last longer. The elastic on mine will eventually pull the glue off of the cardboard.

What kind of spackling are you using?
 
I may have to redo my gauntlets, the cardboard is too flexible. The next ones, I will just cover in fiberglass resin. I will wait and see if the joint compound makes it stiffer, or just crumbles. Only time will tell.

As I was typing this, I just realized that I have about a dozen cardboard newsprint spools that would be perfect for the base of the clamshells. They are super stiff and stronger than the pvc pipe that I used on my jp.
 
Primer...
paintedgaunt.gif


The corners aren't quite as sharp as the picture shows, but they aren't as rounded as I would like, but that's all I could get without losing detail.

I have the other one primed (upper part only), but it is drying at the moment, so I will have pics later. The reason I don't have the lower part done, is because It came out too small to fit my arm. I checked the printer, and it wasn't the problem, maybe my left arm is bigger or something? :confused Weird... Anyway, I am still working out the right size, so It will be assembled after I get the right one painted.
 
Dude - you are a genius!

I started mine today - cut the right gauntlet out and with cyno-glue - was able to piece everything together. I'm using contact cement right now to coat the pieces (on both sides) - then I plan on moving to a fiberglass coat that will hopefully finish it off.

Sand - paint - and done. That's the plan anyways. What you have done so far if outstanding -- I got real excited when I read this post and kept going over it in my head. Now that I've started - I hope everything will pan out correctly.

Thanks for the info and leading the way in this project...

Catch my stuff I've completed so far here: http://www.thedentedhelmet.com/showthread.php?t=20544

What do you think --?
 
*** Db, this is incredible. :cheers

Once again showing people like me that there is no problem that cannot be overcome (or no prop that cannot be built) with the right mixture of ingenuity and Bondo.
 
This thread is more than 16 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top