Aluminum ESB Flame Thrower Interest Thread

Here's a questioned that nobodys asked yet. Will they work on Ruffkin Gauntlets? Because if I buy thats what they will go on. Let me know when you get a chance.
 
Last edited by a moderator:
Here's a questioned that nobodys asked yet. Will they work on Ruffkin Gauntlets? Because if I buy thats what they will go on. Let me know when you get a chance.

I believe so.......This is my ROTJ Ruffkin. I drew the remaining piece that needs to be made for size reference. The complete flamethrower will be 8 3/4"

DSC00362.JPG


DSC00363.JPG
 
Last edited by a moderator:
I hope this does not scare anyone off. With all the detail work that goes into this, complete, and shipped, looks like right around $120.00

Looking for feedback.......................
 
Last edited by a moderator:
Well, As I will be getting a FP ESB gauntlets (If I'm lucky :p)... I can say that if FP gives his OK... (If he think it will be proportionated to his gauntlets), then I will be in ;)

good work.
 
Last edited by a moderator:
sorry my old costume parts (quality painted guants included didn't go on ebay for half that) and the wife said I can only use the money I get from my stuff for costumes. Looks great but I can't do it at this time. Looks like you'll have more than enogh takers for my spot though.
 
Last edited by a moderator:
sorry thats a little high for me at this point. maybe in the future. let me know if the price goes down due to high demand.
 
Last edited by a moderator:
That is VERY reasonable guys. VERY !!!!!

Keep in mind, that 4 years ago, when our own BobaPhett came out with his FIRST AMAZING aluminum flame thrower, they were going for $250 or higher.

So, that being said ... this is VERY reasonable. There is a lot of detail in these pieces, and the assembly is another thing :)

Tim and I are coordinating together as we speak ;)

FP
 
Last edited by a moderator:
Heres what I have so far, you can change your status either way as it is not set in stone :) . I based this on the posts in this thread and the PMs I have received.

"In"

1. TK-2177
2. CenterOfTheMind
3. Mandalor Fett
4. Gilmore of OK
5. Saxcoburg
6. Prymer13
7. phgfett
8. Galactic Bounty Hunter
9. Fettofficer
10. CMAnavy
11. texasfett
12.Got Maul
13. TK-1776
14. dengar 99
15. SlaveR5
16. Vaderfanforever1922
17. Indy Solo
18. SOLOCHASER
19. acyang
20. Christo Fett
21. darthvedder321
22. xaoslord
23. Sithlord23
24. Bountys Hunted
25. Benkenove
26. Matrix

"In pending price"

1. patiam69
2. GNC gamer 128
3. Saxter
4. tk2647
5. Jango's Kid



Let me know if you want me to change your status.
Thanks,
-Tim-
 
Last edited by a moderator:
Sorry, but too much for me at this time. They do look awesome though and they look like they will be worth every penny, but I need to save for a new helm first....:(
Mark
 
Last edited by a moderator:
Wow! $120 is a great price! :wacko :wacko :eek: :eek:
Too bad I already have one.
 
Last edited by a moderator:
I'd be totally in on this, but I just want to verify that this is for the entire flamethrower in aluminium. Not just the nozzel parts. This is the whole assembly too, right? If that's the case, put me on the list. Thanks!:)
 
Last edited by a moderator:
I dont want to speak for psberetta, but yes I do believe they are for the complete flame thrower MINUS the plate that goes on the back attaching it to the gaunt.


I'd be totally in on this, but I just want to verify that this is for the entire flamethrower in aluminium. Not just the nozzel parts. This is the whole assembly too, right? If that's the case, put me on the list. Thanks!:)
 
Last edited by a moderator:
This thread is more than 17 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top