ToEleven ESB bucket & paintup for johnnyhungus

In natural room lighting it's not quite so pale. It's kind of out of balance until the silver and weathering hits it. I like to give it a black wash which also tones it down a bit as well.

Sent from my XT1585
 
Kill stripes. I find it hard to believe Boba only killed 14 people...with all those disintegrations.

IMG_1786.jpgIMG_1783.jpg
 
Looks great, you definitely have some skills!
Also, my hat is off to topical painters. Achieving such smooth layers blows my mind!
 
Last edited by a moderator:
The left ear is finished. The 2 airbrush colors I used are tamiya xf-20 medium grey and xf-65 fied grey (3 drops of white per ml to brighten it up a notch).

I use the templates to cut some masking tape into an arc, and I use masking fluid for the inner arc.

I went old school for the symbol part and used rub on lettering.
IMG_20161022_104404493_HDR.jpgIMG_20161022_105923925.jpgIMG_20161022_121241072.jpgIMG_20161022_122913323.jpg


The left ear is ready to get down and dirty. I ran out of the tamiya I had been using, and picked up some MM wood from my local hobby lobby. With maybe 3 drops of white per ml it came out pretty nice.
IMG_20161022_123550961.jpg
 
This thread is more than 5 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top