I've seen a lot of random ESB packs with the black paint. That's what made me first think i needed it and I was missing something.
It's also black in the pics on the 501st CRL for ESB, which is where I'm guessing people are getting the idea rather than the reference pics.
So, been busy again trucking away on my Fett.
I was trying to figure out how i was going to attach the cables/cords to the back on the flamethrower and my left gaunt, since my "budget" gaunts velcro together and there isn't much a flat place on the top part to glue them into place.
So, I decided to cut out a piece of plastic and will glue it the gauntlet after I paint it up. Here it is just resting there for a test fitting. It should work and won't stand out so much when it's painted green and weathered.
Here's another pic from a different angle. It still needs to smoothed out a bit before being painted.
I also worked on the rangefinder and rangefinder topper. I add the red LED lights.
I also glued the perplex together and now it's ready for installation. I glued a magnet to the other side and also weathered the topper. Once the glue is dry, I just need to attach the completed RF to the helmet and remove the repainted Don Post RF and topper I've been using
I also painted my 3D printed dental files for my right gauntlet and will attach them when they're dry. My plan is to take my photos and submit my pics for 501st approval in 2 weeks. I'll post some completed Boba pics here for feedback before I fill out the application and get my pics taken.
Last edited by Bounty1138; 3 Weeks Ago at 11:38 AM.
So, the final push continues. Here is the mostly weathered rangefinder and topper.
It's next to my repainted 95 DP rangefinder for comparison.
It's obviously a lot better and it's a also a bit taller. The red LED lights are non-functioning right now, but I'll be swapping them out for Jc27's self contained light kit soon. Even non-functioning, they take the helmet up a notch.
Please note these pics were taken with a camera phone that seem to oversaturate the red of the mandibles below.
I also painted and attached the dental files to the right gauntlet. You can also see the hole that I started to create for the oval piece that arrived in the mail today from RKD. I painted it black tonight, so i'll wait for it to dry and will attach it tomorrow.
So, I got some more done this weekend. I used bondo glazing putty to fill a seam in the rocket to get it ready for painting. I also painted the right gauntlet oval piece black and made a hole large enough to install it.
I had a hell of a time with the testors gold spray paint. It came out all gloppy and made a huge mess, but I somehow managed to get an even coat on the end of the rocket. I also painted and attached the green piece of plastic (you can see it behind the flamethrower). This is so I can attach the three cables/cords from the flamethrower to the gaunt. I haven't figured out how to do that yet, but that's what TDH for. I need to look it up.
I also darkened my MoW ammo belt using Deathproof's idea to use a leather and vinyl spray. I started by taping off the threads with the thinnest tape I could find. This was a touch tedious, but need to be done to keep the threads white. The pic below is part way through the process.
Here's a pic while i was spraying and it shows the can of what i used. The brand is Meltonian and it's called Nu-Life Color Spray. The color is 644 Russet.
The tape protected the white threads, but it was also too wide, so after removing the tape, I had to go back and use a brush to get the stain closer to the thread. The pocket on the left is after I applied the brush work to the front and the one on the right is after I pulled the tape off, but before I used the brush. It really shows the difference in color.
Here is the final result. I'm still undecided on how much weathering to apply (done by sanding), but I like the new color a lot better. The MoW belt is just too light. I'll take another look at the reference pics and figure it out.
I just realized that I put the pockets on in the wrong order. I got the sides mixed up. Doh. Easy enough to fix.
So, once I attach the cables/cord to the back of flamethrower this week, I'm going to to do a test fitting and take some pics, so I can get some feedback from you guys before I take my 501st submission pics on the weekend. I'm still hoping the part for my EE-3 arrives so I can put that together in time for the shoot as well, but we'll see.
Last edited by Bounty1138; 2 Weeks Ago at 12:58 PM. Reason: grammar
Great job on the belt! it's definitely tedious but well worth it. I don't think the ESB belt is weathered as much. Just a light sand I would think should do it. Looking forward to you suiting up!
So, after re-attaching the gauntlet rocket, I did a fitting tonight.
I still need to attach the cables/cords to the back of the flamethrower and the gauntlet, but that's the last item on my to-do list before the photo shoot for my 501st submission pics.
After more than 2.5 years at this hobby, I can cross off every line item in the Boba ESB CRL for level 1 (with the lone exception mentioned above). I'm not that far off level 2 (at least as far as line items go, but first things first).
I know there is more to being certified than checking off items on a list. This is where you come in.
The photos I took tonight were indoors and color is pretty hard to determine with (mixed and inconsistent) indoor lighting. So to start, here are a couple of photos from a recent outdoor event. This was before I made improvement to the gauntlets, the jetpack beacon and the rangefinder and stalk. I was also toting my repainted Hasbro RoTJ EE-3, but these pics are better for determining colors. I've also since fixed the drooping knee armour.
So, here are the pics from tonight. I tried adjust them a bit for the lighting, but you can see how everything fits and goes together.
Lastly, here is a close up of my gauntlets.
What do you think? What do i need to improve/tweak/change to get certified (or beyond)? What should I adjust? Let me know. Thanks
Last edited by Bounty1138; 2 Weeks Ago at 12:01 AM.
looking good dude :-)
only things i'd say to adjust...
-dirty up the flight suit some more, weather the sleeves and have the back match the front and hit those ankle straps as well.
-weather the vest a just a bit, seems pretty new looking
-dirty up the soles of the boots and spikes a bit.
-weather the thong and knee armor straps, (left knee strap not as much as the other two straps)
-heat mold the knee armor to fit your knees a bit better.
-bring your jetpack up an inch or two, a little too much white strapping showing from the back
-tuck the gauntlet hose into the short sleeve of the flight suit, not just under the armor.
-looks like that right pocket is a bit stuffed under the ammo belt. they should sit at the same length
-your snap pockets on the ammo belt are out of sequence. the set of pockets on your left, the first pocket should have the snap. also, that same side should have the 4 pouches and 3 on the other.
-on the back of the ammo belt, there should only be 2 grommets for ESB rather than 6. not sure how strict your GML will be but the CRL calls for only 2 on the back.
-try to set the cape so it falls seam-side in so that the sewn together fabrics don't look so, sewn together
honestly i think you did a great job. feels good doesn't it? just a couple easy adjustments and you shouldn't have any issues. good luck bro!
Sent from my R2 unit using Tapatalk
Last edited by jbdubz; 2 Weeks Ago at 1:03 AM.
I agree with Jeremy's suggestions, but I think you're good for your photos this weekend. There will always be little things to tweak here and there. All the best with your submission!
Thanks Gentlemen. It's much appreciated. It's nice to make it this far.
I definitely agree on the weathering. More is good and a dirty Boba is a happy Boba.
I'll also try those other tweaks. Not sure what happened to the hose. It was up the sleeve when i started :-)
Dang ammo belt. I had boxes in the reverse order yesterday and managed to put the last one on the wrong side today
I also noticed that about the knee armor. I fixed the tilt, but it doesn't seem to fit tight enough. i was going to look up how to fix that without damaging the paint. I'd like to get that done before the weekend. Any tips for heat molding?
Since I don't have an actual heat gun, I've used my partner's hair dryer to mold plastic. Worked fairly well. I might also suggest to change where the elastics connect - that might help with the bend. I have fairly short elastics and they connect with snaps to the ends of the knees. This helps keep a good bend.
yeah, those grommets may pose an issue but if you just flip the belt around, remove any velcro and punch two grommets through on the blank side, you should be able to save some $ instead of having to replace it.
if you don't have a heat gun at your disposal, pretty sure if you get a hair dryer on hight heat you should be able to mold them, just may take a bit longer. just make sure to heat from the inside and mold them slowly!
Sent from my R2 unit using Tapatalk
Thanks guys. I'll try the hair dryer tonight. I also think I'll swap out the velcro on the knee armor for snaps, but probably won't get that done this week. A tighter fit makes sense.
As for the grommets, I might try re-applying the leather/vinyl spray. The grommets were almost invisible after I sprayed the belt and I used mineral spirits to clean them off and make them shiny brass again. If I apply the spray again, I can just leave the proper 2 shiny and visible and the rest will blend in. Hopefully that will work well enough.
I'm happy to announce that I was officially approved for the 501st today.
I'm now BH - 11838.
Here are a few of my submission pics. There are a few minor fitting tweaks to be made, but I'm happy with how they turned out.
Thanks to the many people on TDH that helped me get his far. It's been almost 3 years since i first thought about upgrading my budget homemade Fett and started poking around the internet for resources.
Of course, I'm not done. There are still found parts to find and upgrades to be made.
I'm still always looking for feedback and ways to improve.
Congratulations on your 501st approval Bradley!
Great looking Fett! Congatulations
Gesendet von meinem D6603 mit Tapatalk
Looking great! Congrats!