Introducing MachineCraft Replicas

LOL! Don't you worry guys! Just an update, we're finalizing the drawings these next few days and will be able to share pics very soon!

This stuff is right around the corner, and we are going to have some NEAT and ground-breaking items to share with you. I can't go into details quite yet, but I can tell you if everything works out as planned we are going to offer some features that have yet to be seen in aluminum pieces currently offered!
 
Heya, I shot you a PM about one of the first custom parts I need to dig up, if you have a chance to take a look. No rush though! That project is still a few months out :)
 
I was just wondering you mentioned all the jetpack parts are based around the FP jetpack. I can't really find any thread about the FP pack other then the one Pontee did (sorry if I misspelled that brother) my question I guess is will these also fit the MOW pack?



Chris
 
I was just wondering you mentioned all the jetpack parts are based around the FP jetpack. I can't really find any thread about the FP pack other then the one Pontee did (sorry if I misspelled that brother) my question I guess is will these also fit the MOW pack?



Chris

There are detailed images of the jetpack on fettpride's site too ==> Misc Fett Parts.
 
So I think you guys have been pretty patient with us... So i'm going to share a few treats with you guys! We are VERY close to having this be a reality, and trust me when I say these parts are about as accurate as it's going to get being they are based off of FP parts!

If you have any questions or critiques about the pieces feel free to share them with us! These are close to our final drawings, there are a few things that will be changed in the actual machining process. Right now we are waiting to hear back on material/labor costs, and should have some final figures available soon to share with you!

On to the sneak peaks!:

Jetpack Stabilizer:

ScreenShot2013-06-04at91534PM_zps6931ba5e.png


ScreenShot2013-06-04at91549PM_zps9cad214d.png




Jetpack Vents: (Both Versions)

ScreenShot2013-06-04at91556PM_zps59114959.png


ScreenShot2013-06-04at91728PM_zps87b43578.png




Side Thruster Greeblie: (There was a change made to this piece)

ScreenShot2013-06-04at91605PM_zps5a3b8925.png




Side Thruster Disc (or Afterburner as I call it):

ScreenShot2013-06-04at91613PM_zps63e5ce77.png




Jetpack Collar:

ScreenShot2013-06-04at91740PM_zps4fc85912.png




Knee Darts:

ScreenShot2013-06-04at91640PM_zpsd62553b1.png


ScreenShot2013-06-04at91627PM_zpsfb12ca62.png




Jetpack Beacon:

ScreenShot2013-06-04at91652PM_zps3b116c94.png


Beacon top will be available in Brass!
ScreenShot2013-06-04at91710PM_zps8a38c31c.png




ROTJ/SE Flamethrower Nozzle: (This may be offered threaded with a block to keep the spaces between the nozzles correct)

ScreenShot2013-06-04at91719PM_zps2531fdff.png





Tell us what you think, guys!
 
This thread is more than 9 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top