My ESB Fett is now complete PIC HEAVY

Finally...it's done. Please post comments, suggestions or corrections. I am currently working on the positioning of the pack; I put the hooks too high up. I will be bondo-ing the holes and painting them over as soon as I get the make/model of the color used from S1P.

I purchased most of the suit in a fortuitous Ebay auction. The artists are unknown with the exception of the following:

Armor and Gauntlets-Wickedbeard
Blaster-Sidewinder
Blaster sling and jet pack harness-99CentTaco
Sidearm and Holster-MLC
Boot spikes-Russrep
Jet Pack-MOW, painted by Slave1Pilot
Jet Pack hooks-Madmartigan
Aluminum beacon and stabilizer-Serenity, lit using BatNinja’s beacon lighting tutorial
Flightsuit, gloves and shin tools-Bobamaker

100_3621.JPG

100_3622.JPG

100_3623.JPG

100_3624.JPG

100_3625.JPG

100_3626.JPG

100_3627.JPG

100_3628.JPG

100_3629.JPG

100_3630.JPG

100_3621.JPG


100_3622.JPG


100_3623.JPG


100_3624.JPG


100_3625.JPG


100_3626.JPG


100_3627.JPG


100_3628.JPG


100_3629.JPG


100_3630.JPG
 
Last edited by a moderator:
Onecenttaco??? Is there another taco? Sorry if you might have been misinformed but if you meant me, all I can say is the one pictured isn't by me...but looks good on ya though

But if there is a onecenttaco that is just crazy! LOL...does that mean someone is doing knock offs of my stuff? LOL am I a name brand now...? lol
 
Let me ask the crew...in the second pic, do you think the pack is too low? Should I move the hooks lower? Should I just tighten up the white strap to pull the pack a bit higher. I've seen several pics with the pack at all different "heights." I certainly don't WANT to move the hooks, but if that is what's necessary to adjust the pack ride height, I'll do it.
 
Start by tightening the harness straps. There's about an inch and a half more showing than should be. That'll bring it up some. Just eyeballing it, you might have the hooks a little too high, but not by much.

-C
 
This thread is more than 15 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top