HeadlessHunter
Well-Known Hunter
Ok after seeing AVP-R I though the character of the Predator or the Wolf as he is known was easily my favourite rendering of the character to date, so I decided to set myself the goal of making a Wolf suit, now I know this is going to take me a lot of time but I will get there, I started off a few months back, I was fortunate enough to get a casting of Predamaker's Wolf bio, which is a fantastic piece, up til now thats pretty much all I have although I have an undermask on its way too (thanks Mr Fett) I used the same technique I used on my last bio helmet, and heres a run down of the process with some pictures of the finished article
* trim and sand the helmet
* primer to show any spots that need fixing - here I decided to 'widen' the appearance of the lower cheeks and to lower the 'frown' a little with some filler to give it a more menacing appearance, once I had added the extra bulk I needed to replicate the hammered metal bumps in the surface, I solved this by using 3-4 different size drill bits and gently 'spoting' a few marks in a random fashion, I did this until I was happy with the effect, once that was done I re-primered the helmet.
* flat black coat, this settles in all the little grooves of the helmet which will add to the overall effect
* several 'blasts' of chrome silver, from about 2 foot away to begin the metallic look
* using Tamiya Titanium Silver I scrunched up some paper towel and used that with the paint to apply more silver detail to the helmet mainly the raised features of the helmet, around the snout and the eyes for example
* when painting my Boba Fett helmet I found oil pastels were great for adding grimy marks, here I used a dark ochre pastel and rubbed a bit of 'dirt' in here and there
* a final touch up using the paper towel and Tamiya Titanium Silver and voila, she's nearly there, just need to finish the laser shroud and add a good set of lenses. Let me know your comments![Thumbs Up (y) (y)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
* trim and sand the helmet
* primer to show any spots that need fixing - here I decided to 'widen' the appearance of the lower cheeks and to lower the 'frown' a little with some filler to give it a more menacing appearance, once I had added the extra bulk I needed to replicate the hammered metal bumps in the surface, I solved this by using 3-4 different size drill bits and gently 'spoting' a few marks in a random fashion, I did this until I was happy with the effect, once that was done I re-primered the helmet.
* flat black coat, this settles in all the little grooves of the helmet which will add to the overall effect
* several 'blasts' of chrome silver, from about 2 foot away to begin the metallic look
* using Tamiya Titanium Silver I scrunched up some paper towel and used that with the paint to apply more silver detail to the helmet mainly the raised features of the helmet, around the snout and the eyes for example
* when painting my Boba Fett helmet I found oil pastels were great for adding grimy marks, here I used a dark ochre pastel and rubbed a bit of 'dirt' in here and there
* a final touch up using the paper towel and Tamiya Titanium Silver and voila, she's nearly there, just need to finish the laser shroud and add a good set of lenses. Let me know your comments