Albino Fett Pre Pro Rifle Reference Pictures

GCNgamer128

Sr Hunter
This is the screen used prop from the Pre-Pro pictures of the Albino Boba Fett. Steve Sansweet had it in his collection, so I was sure to take plenty of reference pictures for the community.

CIMG0122.jpg

CIMG0123.jpg

CIMG0124.jpg

CIMG0136.jpg

CIMG0137.jpg

CIMG0138.jpg

CIMG0139.jpg

CIMG0140.jpg

CIMG0141.jpg

CIMG0305.jpg

CIMG0306.jpg

CIMG0307.jpg

CIMG0308.jpg

CIMG0309.jpg

CIMG0310.jpg

CIMG0311.jpg

CIMG0312.jpg

CIMG0313.jpg

CIMG0314.jpg

CIMG0315.jpg

CIMG0316.jpg

CIMG0317.jpg

CIMG0318.jpg

CIMG0319.jpg

CIMG0320.jpg

CIMG0321.jpg

CIMG0322.jpg

CIMG0323.jpg

CIMG0324.jpg

CIMG0325.jpg

CIMG0326.jpg

CIMG0327.jpg

CIMG0328.jpg

CIMG0329.jpg

CIMG0330.jpg

CIMG0331.jpg

CIMG0332.jpg

CIMG0333.jpg

CIMG0334.jpg

CIMG0335.jpg

CIMG0336.jpg

CIMG0337.jpg

CIMG0338.jpg

CIMG0339.jpg

CIMG0340.jpg

CIMG0341.jpg

CIMG0342.jpg

CIMG0343.jpg

CIMG0347.jpg
 
Excellent work!

This should be stickied up with the other blaster stuff!

I'm sure someone will be doing an albino Fett at sometime if not already!
 
Last edited by a moderator:
I know somebody said something before about using the jet pack stabilizer in the barrel, but is that one of the knee dart launchers on the side?
 
Last edited by a moderator:
You're welcome to everybody!

I know somebody said something before about using the jet pack stabilizer in the barrel, but is that one of the knee dart launchers on the side?
Yep, the little pointy one on Boba's right knee dart, the one on top :D
 
Last edited by a moderator:
wow! i never even thought to ask him to take it out of the case!!!

i have great pics of one side, but nothing like yours. rawk!

did you get any other good pics while you were there? what was the occassion?
 
Last edited by a moderator:
wow! i never even thought to ask him to take it out of the case!!!

i have great pics of one side, but nothing like yours. rawk!

did you get any other good pics while you were there? what was the occassion?
I have a thread in the Sarlaac Pit with all of my other photos :)

Well Steve's computer broke, so he invited his friend and my CO Damien up to his house to fix it, and he also needed manual labour to clean up, reorganize, and throw away a bunch of junk. So he invited the garrison up to be the slave labor.
Steve said that you can touch and pick up anything you want, just as long as you put it right back where you found it.
 
Last edited by a moderator:
Great work! The photos answer a question of mine. The Graflex used for the barrel is the different model than the one used for Luke's saber in ANH. You can tell by the machined "stripes" (rings) toward the end of the flash tube.

(y)
 
Last edited by a moderator:
Something I noticed about the gun--in addition to the stabilizer and knee from the other thread, the ribbed looking thing behind the knee dart looks the handle to the Paterson mixer stir stick. Those of you that own one will recognize it.
 
Last edited by a moderator:
NICE POST GCNgamer128!!(y) (y)

QUESTION: Did you get any good Pics of the JET PACK you posted pics of ???:eek:

And just in case there are those that don't know what he's talking about..."ALBINO"...

(y)

White%20Fett%20%231.jpg


GRAFLEX.jpg
 
Last edited by a moderator:
In total, I have about 5 pictures of the ROTJ jet pack.

Included in my PM to SpideyFett:

I didn't get a chance to get the jet pack out, but believe it or not, the screen used jet pack was made out of foam. That way Boba could fall and roll around without a chunk of fiberglass on his back. The pack itself was extremely beaten up, the rocket had been torn off, along with the left thruster, they both were glued back on. The repair to the pack was pretty poor, the glue was exposed and the thruster wasn't glued on straight.

Andy
 
Last edited by a moderator:
Just noticed that in the pics that Spidey posted the Graflex is turned with the "ears" up as though they were a gun sight, yet on the prop in the collection it is turned ninety degrees so that the "ears" are on the side.
 
Last edited by a moderator:
It appeared to be held in with tape, the lower part of the tube was wrapped in tape and then slid into the resin Uzi. On the gun's right shot of the Graflex, you will see a square little shiney area, this isn't weathering, it's a metallic tape. It might be able to turn if you try to move it.
 
Last edited by a moderator:
Hi Andy,

thanks for the great pics.
I finished the work on my gun 2 weeks ago and now I have to correct some details.
Here´re some pics of the gun.

Sven


100D2815.jpg


100D2817.jpg


100D2818.jpg


100D2819.jpg


100D2821.jpg


100D2822.jpg


100D2823.jpg


100D2824.jpg
 
Last edited by a moderator:
This thread is more than 16 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top