UPDATE:
Sorry for the lame pics above, reminds me of how a 3 year might take pics, I'll post better ones later of course though. Fortunatly, my G-friends grandfather has a better know how of some of the work needed to be done, so I went over, and he helped me countersink a screw into the stalk (not a "screw" 'screw', a smooth bodied bolt, with a screw that fastens into the side) I dont know the technical term for it, but you'll see in the pics later on. As well as getting the proper "screws," we put holes through the resin piecs and the helmet itself. Aslo we drilled 2 holes on the top, underside to where the RF box would be attatched, as well as pilot holes for the screws that I will add after painting. Other then the RF attatchments being finished really, I as well finished sanding the visor and keyholes. The only thing left now, is to sand the helm, prime, sand... and then paint it. I plan on using a q-tip to swab on some Goop to fill the small holes in the resin pieces, as well as some smaller, descret portions of the helm. After that, I paint it all, rubb and buff it, add some elbow grease, and that will be it I guess (minus the liner, attatching the wire mesh behind the keyholes and of course, attatching the visor) Seems to be going quicker then previously expected. I just want to confirm also that it is a "1/8" inch black stripe, went out, and bought a roll at an auto store.
I'll be leaving sunday morning, and not getting back for 4 weeks (MAA and Honor Guard training at NAS Kingsville, Texas) I'll continue on July 1st probably. Cya guys then.
-tubachris