terminal fettler
Active Hunter
Tweaked colour list: (20/5/10)
1. L/H ear: red 60, grey 28+64 (1:1), green 159+78 (1:1) weathering splatter brown 93 on front surface. Ear decal white 34.
2. R/H ear: silver 11, grey 79, sand 94
3. Back panels grey 147, silver 11, grey 106, beige 28 ( mist with beige 103 ), green 76+96 (1:1) weather green with wire wool as per ref pics and light shading with dark grey 32.
4. Dome and lower cheeks grey 147, silver 11, grey 79 and green 78.
5. Mandibles and trim: grey 147, silver 11, grey 106, purple 73+104 (1:1), red 60, red 73.
6. weathering with brown 93 around trim and arrows, shading with grey 32 along edge of lower cheeks.
7. splatters with brown 62, beige 103, grey 79.
8. scuffs brown and white caran dache pencil.
9. scuffs by kill stripes layer with black 33 and brown 62 with white spirit.
I thought i would document the process again as i try to improve on the last one. I've planned a couple of tweaks to the techniques and colours. The helmet has a white gel coat which will be scratched back to in certain areas, a thin grey primer coat and the first layer, the light grey Humbrol 147, which is actually blue/green/grey...
1. thin coat of grey primer
2. light grey base coat 147
tip: reference pictures used from 'Boba Fett at the Art of Star Wars Exhibit', courtesy of TDH...
1. L/H ear: red 60, grey 28+64 (1:1), green 159+78 (1:1) weathering splatter brown 93 on front surface. Ear decal white 34.
2. R/H ear: silver 11, grey 79, sand 94
3. Back panels grey 147, silver 11, grey 106, beige 28 ( mist with beige 103 ), green 76+96 (1:1) weather green with wire wool as per ref pics and light shading with dark grey 32.
4. Dome and lower cheeks grey 147, silver 11, grey 79 and green 78.
5. Mandibles and trim: grey 147, silver 11, grey 106, purple 73+104 (1:1), red 60, red 73.
6. weathering with brown 93 around trim and arrows, shading with grey 32 along edge of lower cheeks.
7. splatters with brown 62, beige 103, grey 79.
8. scuffs brown and white caran dache pencil.
9. scuffs by kill stripes layer with black 33 and brown 62 with white spirit.
I thought i would document the process again as i try to improve on the last one. I've planned a couple of tweaks to the techniques and colours. The helmet has a white gel coat which will be scratched back to in certain areas, a thin grey primer coat and the first layer, the light grey Humbrol 147, which is actually blue/green/grey...
1. thin coat of grey primer
2. light grey base coat 147
tip: reference pictures used from 'Boba Fett at the Art of Star Wars Exhibit', courtesy of TDH...
Last edited by a moderator: