Well I have done much more work!! First off, I layered on a few coats of bondo to get rid of the old west revolver shape and more of the flare gun body. Yeah I know it's not perfect, but for my first try, this is the best I could get it:
They didn't end up as a mirror image and there are some things about each side I like and also dislike. But this will have to hold me over until a certain someone fixes his molds. I bought some stock greebs and painted them up. Here are the backsides...I forgot to take a pic of the topside.
The square has some detailing inside of it, so I bought some wooden things at Michaels and modded them to roughly match the pics I have seen.
I bought a real scope and have been having problems finding scope rings. I cannot by ones from guys on here, since I scratch built the barrel and it doesn't taper just right. I bought some sculpty and was gonna make some, but came up with a different idea. I cut two strips of 3mm sintra matching the circumference of my barrel and width of the scope mounting brackets. After 45 seconds in the oven, totally snug and lightweight scope rings!
A coat of primer.... (I love this Krylon gray primer)
Then a few coats of ultra flat black & clear flat coating...some assembly and wham, here is my ESB:
I forgot to attach my molex connectors. I have them and they are trimmed and painted. Also, I got to throw on some red on the top edge of the square greebs and was going to add some scortching to the tip of the barrel. I am going to try to find some greebs to add in the square, since I am missing three small tings in there & also the lever above the trigger (if anyone molds this, let me know, please).