Krayt Dragon Helmet Underway!

Well, I've been working on the Krayt Dragon helmet from Saz for the last couple days. I started off by adding my greeblies, custom keyslots, custom ear caps etc. Then I made my cut outs and backfilled with Bondo and Glazing Putty. Today I finished the sanding, masked off the Krayt Dragon and have started painting. So,here it is so far...
Raw helmet:
1104091400.jpg

Primed:
1107091347.jpg

1107091347a.jpg

1107091347b.jpg

1107091347c.jpg

Silvered:
1107091351.jpg

Bronzed:
1107091404.jpg

I'llput onemore bronze coat on today. Tomorrow I'llwetsand the bronze and mask off the key slotsand earcaps. Then I'll paint layer after layer, wetsanding between each. Once all the under coats are on, I'll get the top colors on, do the detail work etc. I'll keep posting daily progress.
 
Well, the paint and weather cooperated today! Here is what I got done today...
Red coat,wet sanded:
1108091433.jpg

Yellow coat, wet sanded:
1108091611.jpg

Green coat,wet sanded:
1108091646.jpg

Gray coat, wet sanded:
1108091720.jpg

Forgot to take a pick of the black coat,my bad.
After the black coat was on, not wet sanded, I spot applied 2 coats of the OD green:
1108091850.jpg

Tomorrow I'll mask it off and get the red brown and the matte brown down.
 
Alright, knocked out alot today!

Color's applied:
1109090958.jpg


Masking removed:
1109091544.jpg


Fully weathered:
1109091742.jpg

1109091742a.jpg

1109091742b.jpg

1109091742c.jpg

1109091743.jpg

1109091743a.jpg

1109091743b.jpg

1109091743c.jpg


Now, just some exterior greeblies and RF then onto the interior!
 
Last edited by a moderator:
Nice bucket their vod. I really like what you put in for the sides instead of a range finder. I am actually considering something like that instead of a range finder. GREAT JOB again!
 
This thread is more than 14 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top