Boba and Jango Packs

S

Skupilkinson

Active Hunter
Hey guys,

I wanted to do something to give a little back to this great community seeing as it gives so much to us budding Mandos. :)

Some may have seen my Fett gauntlet thread where I've modelled the gauntlets in 3D and intend to use Pepakura to unfold them to produce 2D templates similar to WoF templates?

Well, those were originally done for a friend so I wanted to start something new that was actually intended for TDH members. I haven't read the latest on some of Wizardofflights threads but if I recall, he hasn't had the chane to get the Jango Arena pack done?

Well, this morning I started to model Bobas rocket pack and have copied it and altered it to get the Jango pack done too! The modelling is very nearly done and then I'll unfold them. The templates will be made freely available here to all TDH members. ;) Both are based on WoF blueprints.

Here's a pic so far:
Image5.jpg

As you may see, some of the finer detail has been left out to make the build easier as it can be added later. You can read a little more and see some more pics at my blog: http://skipspepakuracostumes.blogspot.com/

Let me know what you guys think. :jet pack:jet pack:jet pack

EDIT/UPDATE!

I have finished the Jango Arena pack!! :D

I've uploaded it here for you guys to download and try out. Please let me know if there are problems or if you have questions. Enjoy!!

View attachment Jango Arena JetpackA4.zip

View attachment Jango Arena Jetpack Letter.zip

You'll need Pepakura viewer to open the file and to print it out, that can be found here: http://www.tamasoft.co.jp/pepakura-en/
 
Last edited by a moderator:
................:eek:

WHOA!!! You are a Madman!!
I can't keep enough cardstalk in house these days!!

You did a stellar job on that bad-boy.
 
Last edited by a moderator:
Thanks, they were actually really esy to do. That's thanks to the blueprints. Everything lined up pretty perfectly so it was a really pleasant time.
 
Thanks buddy. :) I spent yesterdy doing the Fett helmet. That's almost done now too so I'll be needing to spend a day unfolding them and getting them ready.
 
LOL! Thanks buddy. I know alot of the guys at the 405th do that, model something then release it for others to unfold. I'm not like that though, I prefer to see it through to the end.
 
I'm starting to unfold the Areana pack now that the helmet is done. I have a question though. I need a litle help.

How tall/high is the arena pack from thruster nozzle to the tip at the top? I need this for scaling the model so any help here is greatly appreciated! ;)
 
I really want to get this one done today. I looked at the model again before making a start on unfolding it and came to the conclusion that it was a little too low poly. Low poly is good for this kind of modelling but because this is intended to be a 1/1 scale prop when done, the cylinders and cones needed to be smoother.

Image2.jpg

That's done now, so if someone would be kind enough to tell me the height of the arena pack, then I can scale it and unfold it today. ;)

Anyone?
 
This thread is more than 11 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

Coanc
Boba ESB girth belt paint color and brand help!
Replies
3
Views
237
Coanc
Coanc
Bobamannen
Bobamannen's ROTJ build
Replies
9
Views
319
BudaFett
BudaFett
GEEK1138
BOBA FETT'S RIDE
Replies
0
Views
164
GEEK1138
GEEK1138
nWoHollywood
What are the differences between the ESB Fett armor made by MinuteFett, NeoProShop and Bobamaker?
Replies
10
Views
387
Ord Mantell
Ord Mantell
jangobobango
Budget Boba build Aliexpress base
Replies
12
Views
522
jangobobango
jangobobango
Back
Top