Well, I had taken a step back from the project because I needed some tools and also after checking the setup, I wasn't happy with how high the desk was going to sit once I would add the glass on top of Han.
So it was back to the drawing board (inside my head that is) determining how to accommodate the person's legs while sitting at the desk without raising the desk, hence the height of the glass top.
Simple task at first, but then you must realize that means actually cutting away part of the frame and the sideboard, making the entire structure less stable.
So I began working in my head how I would take away the least amount of wood to allow clearance for the person, yet still maintain some rigidity. During this past month and a half, I've also been working on my Vader ROTS suit, which allowed me a needed break from Han.
I came back this past week invigorated wanting to continue. I decided on the measurements of my cut, and at the same time came up with a great plan where I'm going to be putting the motherboard, hard drives, cooling fans, and whatnot for the computer once the desk is done and ready to have the hardware mounted into it.
Opposite of the opening where the person will have their legs, I will put a bottom on the desk and inside those two areas the internals of the computer will be housed, with illuminated green and red cooling fans being grafted into the HIC Side Panels.
In the pics, you can also see I started working on the first drawer for the desk. I think it came out pretty well. Keep in mind, this is all coming from my head at this point. I only did the basic sketches for the initial frame. Now it's a matter of working it out in my head, ensuring it's what I want.
Anyways, without further ado: