Subscribe
  1. Member Since
    Aug 2003
    Posts
    641
    Jul 31, 2013, 1:38 PM - Interest Thread: Machined U-Clips for carbonite panels! #1

    Looking for more interest to get another run of the machined U clips done. These are the twenty metal clips seen on the carbonite panels (they are on all but the hero panel) folded from sheet steel in an accurate one-piece design.


    "When resin just won't do!"


    Here are some pictures showing them on my own carbonite block:












    Complete set of twenty clips plus all the screws (three accurate types) and hex nuts for attaching them will be 85 plus shipping with half payable up front once we have enough interest. Not taking any payments until it's a go!


    PM me please if you're in.
  2. Member Since
    May 2013
    Posts
    74
    Jul 31, 2013, 2:30 PM - Re: Interest Thread: Machined U-Clips for carbonite panels! #2

    YESSSSS!!! Sign up people so we can get this run going!
  3. saint_nasty's Avatar
    Member Since
    Nov 2006
    Posts
    2,875
    Jul 31, 2013, 7:14 PM - Re: Interest Thread: Machined U-Clips for carbonite panels! #3

    i would love to get in on this, but it won't be until september at least before i could swing it.
  4. Member Since
    Aug 2003
    Posts
    641
    Jul 31, 2013, 7:30 PM - Re: Interest Thread: Machined U-Clips for carbonite panels! #4

    I would only be looking for 50% deposit and that won't be for a few weeks anyway so don't worry.
  5. Lactard's Avatar
    Member Since
    Feb 2009
    Posts
    29
    Jul 31, 2013, 7:45 PM - Interest Thread: Machined U-Clips for carbonite panels! #5

    Count me interested
    Quote Quote Posted from iOS app
  6. juanmatroop's Avatar
    Member Since
    Jan 2013
    Posts
    62
    Aug 1, 2013, 6:47 PM - Re: Interest Thread: Machined U-Clips for carbonite panels! #6

    Me too
  7. saint_nasty's Avatar
    Member Since
    Nov 2006
    Posts
    2,875
    Aug 1, 2013, 8:48 PM - Re: Interest Thread: Machined U-Clips for carbonite panels! #7

    What's the price in USD?
  8. Member Since
    Aug 2003
    Posts
    641
    Aug 2, 2013, 3:30 AM - Re: Interest Thread: Machined U-Clips for carbonite panels! #8

    $125...
  9. Member Since
    May 2013
    Posts
    74
    Aug 25, 2013, 8:25 PM - Re: Interest Thread: Machined U-Clips for carbonite panels! #9

    How many more do we need including the Yahoo group to make this run a go?
  10. Member Since
    Aug 2003
    Posts
    641
    Aug 28, 2013, 3:37 AM - Re: Interest Thread: Machined U-Clips for carbonite panels! #10

    Another 7.
  11. Member Since
    Nov 2013
    Posts
    1
    Nov 7, 2013, 12:59 PM - Re: Interest Thread: Machined U-Clips for carbonite panels! #11

    I have just started aquiring pieces to build HIC. I will be getting Han shortly, I have the box and I would like to get the clips. Let me know if it is still possible to get in on this.

    Thanks
  12. Member Since
    Aug 2003
    Posts
    641
    Nov 7, 2013, 1:57 PM - Re: Interest Thread: Machined U-Clips for carbonite panels! #12

    Absolutely. Still trying to get enough interest.
  13. Member Since
    May 2013
    Posts
    74
    Nov 7, 2013, 3:05 PM - Re: Interest Thread: Machined U-Clips for carbonite panels! #13

    What 3 types of screws do these use? And why 3 versus just 1 type for all 20?
  14. Member Since
    Aug 2003
    Posts
    641
    Nov 10, 2013, 12:18 PM - Re: Interest Thread: Machined U-Clips for carbonite panels! #14

    There are three types of screw on the original prop.
  15. Vultana's Avatar
    Member Since
    Mar 2012
    Posts
    523
    Nov 14, 2013, 9:25 AM - Re: Interest Thread: Machined U-Clips for carbonite panels! #15

    Count me in!
  16. Member Since
    Nov 2013
    Posts
    5
    Dec 4, 2013, 2:18 AM - Re: Interest Thread: Machined U-Clips for carbonite panels! #16

    I'm in too
  17. Member Since
    Sep 2008
    Posts
    9
    Dec 16, 2013, 8:57 AM - Re: Interest Thread: Machined U-Clips for carbonite panels! #17

    Im down for a set.

    Rob
  18. Member Since
    Jan 2014
    Posts
    3
    Feb 4, 2014, 10:50 AM - Re: Interest Thread: Machined U-Clips for carbonite panels! #18

    Are these still available Kurtyboy? If so im interested in them. Cheers
  19. Member Since
    Aug 2003
    Posts
    641
    Feb 4, 2014, 12:43 PM - Re: Interest Thread: Machined U-Clips for carbonite panels! #19

    They are. I'm taking a final list of interested people. Several have not confirmed sadly.
  20. jgorzka's Avatar
    Member Since
    May 2012
    Posts
    17
    Feb 13, 2014, 7:58 AM - Re: Interest Thread: Machined U-Clips for carbonite panels! #20

    I'm in for a set!!!
  21. Member Since
    Aug 2003
    Posts
    641
    Feb 13, 2014, 3:16 PM - Re: Interest Thread: Machined U-Clips for carbonite panels! #21

    Quite a few people have dropped out for some reason.
  22. Apr 28, 2014, 8:16 AM - Re: Interest Thread: Machined U-Clips for carbonite panels! #22

    Hey nice U clips also in good condition. I know i'm too late so i wants to know that these are still available or not?
    Looking forward for your reply..
  23. Member Since
    Aug 2003
    Posts
    641
    Apr 28, 2014, 1:04 PM - Re: Interest Thread: Machined U-Clips for carbonite panels! #23

    I'm afraid I had to cancel the run because the machinist prices went up by 48%!

Similar Threads

  1. 4th time the charm? Machined Metal Jango Blasters interest thread
    By tubachris85x in forum Jango Fett Costume
    Replies: 10
    Last Post: Oct 4, 2009, 1:15 AM
  2. Machined westar interest thread/sign up
    By tubachris85x in forum Jango Fett Costume
    Replies: 95
    Last Post: Jun 16, 2008, 12:53 AM
  3. Replies: 239
    Last Post: Dec 27, 2007, 8:10 PM
  4. INTEREST THREAD BOBA MACHINED ALUMINUM KNEE & GAUNTLET DARTS
    By slave1pilot in forum Boba Fett Costume
    Replies: 9
    Last Post: Jul 7, 2007, 12:46 PM