Page 1 of 2 12 LastLast

Interest: HIC Full Front Urethane Rubber Body Panel Run

  1. #1
    darthchromer's Avatar
    Member Since
    Aug 2009
    From
    Spokane Wa.
    Posts
    20

    Interest: HIC Full Front Urethane Rubber Body Panel Run

    Hi All, I am posting to see the interest in a run of my rubber Han in Carbonite full body panels. They will be made in a high quality high tear strength urethane rubber with a durometer of 60, which is comparable to the hardness of a rubber car floor mat. They are made in this rubber so the entire body panel can be rolled up and shipped with out costing a fortune. I will provide a comprehensive install tutorial as I am building one for a friend right now. Feel free to ask me any questions about the cast. I have a thread on the making of this cast from a low number Illusive Concept prop here Han Solo In Carbonite prop… going under cover... .

    Dimension are; bottom width 25-3/4'', length 73-1/2", top width is 23-3/4". It is a hair bigger than the blue print dimensions and can be easily trimmed down if you need, with a good pair of sharp scissors.

    I will ship overseas and accept Pay Pal for payment.

    $450 US +shipping

    If interested just send me a PM and I will put you on the list.

    Shipping to the lower 48 is $25

    I will try my best to do 4-5 a week.

    I will contact you in fives. As soon as one group is shipped, I'll contact the next five and get Pay Pal payments.

    1) Phillip H. (PAID/SHIPPED)
    2) Derrick L. (PAID/SHIPPED)
    3) Weaselflinger (PAID/SHIPPED)
    4) Kenblomi (PAID/SHIPPED)
    5) Nidgit (PAID/SHIPPED)
    ****************
    6) PK (PAID/SHIPPED)
    7) Major Payne (PAID/SHIPPED)
    8) Dsp5500 (PAID/SHIPPED)
    9) Max Jenius (PAID/SHIPPED)
    10) Dereforence (PAID/SHIPPED)
    ****************
    11) artbypaul (PAID/SHIPPED)
    12) Marsattack
    13) IrishJohnny (PAID)
    14) Pake (PAID/SHIPPED)
    15) Barry (PAID/SHIPPED)
    ****************
    16) Nemdroid (PAID/SHIPPED)
    17) downinflames (PAID SHIPPED)
    18) jameth1971
    19) ShiftyHenery
    20) Shampayne
    ****************
    21) Tuskin Scout
    22) Little Museum
    23) JoshimuS
    24) Kevjh
    25) Jason Newton
    *****************

    I am going to cap the run at 25 for now. I will put anyone else that is interested in one on an overflow list. There will probably be some people that drop out. If not I will get you on the next run.


    Here are some pulls from my mold of this casting. The body cavities will be filled with expandable foam. The head hands and toes will be ridged foam and the body will be a flexible foam so it can be rolled and shipped.















    Last edited by darthchromer; Oct 29, 2013 at 1:44 PM.

  2. #2
    saint_nasty's Avatar
    Member Since
    Nov 2006
    From
    bozeman, mt go cats!!!
    Posts
    2,821

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    just wondering, i've heard you also do the volvo panels and greeblie sets?

  3. #3
    darthchromer's Avatar
    Member Since
    Aug 2009
    From
    Spokane Wa.
    Posts
    20

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    saint_nasty said: View Post
    just wondering, i've heard you also do the volvo panels and greeblie sets?
    Yes I do. When I am done with the body panel run I will start a new side panel greeblee run again. I will get it in the Cargo hold when I run them again.
    Last edited by darthchromer; Aug 9, 2013 at 12:27 PM.

  4. #4
    saint_nasty's Avatar
    Member Since
    Nov 2006
    From
    bozeman, mt go cats!!!
    Posts
    2,821

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    excellent! looking forward to it.

  5. #5

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    Awesome, can't wait to purchase both and get it all started!!
    Last edited by Chewy; Aug 9, 2013 at 11:26 AM.

  6. #6

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    Do you have any partials available? I am looking into making a desk and will not need it to be quite as long.

  7. #7
    darthchromer's Avatar
    Member Since
    Aug 2009
    From
    Spokane Wa.
    Posts
    20

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    ixithatchil said: View Post
    Do you have any partials available? I am looking into making a desk and will not need it to be quite as long.
    Right now I am concentrating on full panels but at the end of the run OI may have some left over material for partials.

    - - - Updated - - -

    There has been some delays on the production side due to my "day job" work load. Again I am doing this on my spare time. Have patients, I will get to you. I am going to cap this run off at 25 for now. Once I reach that point and everyone has their cast, I will reevaluate doing another run. Thanks everyone!

  8. #8
    ShiftyHenry's Avatar
    Member Since
    Aug 2012
    From
    Seattle, WA
    Posts
    10

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    This simply looks amazing. Outstanding work.

  9. #9
    darthchromer's Avatar
    Member Since
    Aug 2009
    From
    Spokane Wa.
    Posts
    20

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    ShiftyHenry said: View Post
    This simply looks amazing. Outstanding work.
    Thanks SH!


    Hi Guys I am going to cap the run at 25 for now. I will put anyone else that is interested in one on an overflow list. There will probably be some people that drop out. If not I will get you on the next run.
    Last edited by darthchromer; Oct 8, 2013 at 5:37 PM.

  10. #10
    ShiftyHenry's Avatar
    Member Since
    Aug 2012
    From
    Seattle, WA
    Posts
    10

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    darthchromer said: View Post
    Thanks SH!

    - - - Updated - - -

    Hi Guys I am going to cap the run at 25 for now. I will put anyone else that is interested in one on an overflow list. There will probably be some people that drop out. If not I will get you on the next run.
    Sounds good to me!

  11. #11
    darthchromer's Avatar
    Member Since
    Aug 2009
    From
    Spokane Wa.
    Posts
    20

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    Hi all, I just updated the list. There were a few drop outs. The people in overflow are getting slowly added in to this run. Next five have been contacted.

    Thanks

  12. #12
    darthchromer's Avatar
    Member Since
    Aug 2009
    From
    Spokane Wa.
    Posts
    20

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    Trudging along Next five are being contacted.

  13. #13
    Vultana's Avatar
    Member Since
    Mar 2012
    From
    Frederick, United States
    Posts
    519

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    Comments edited since I have acquired my side panels.
    Last edited by Vultana; Apr 24, 2014 at 8:20 AM. Reason: Obtained side panels

  14. #14

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    I am interested in the full body. Please add me to your list.

  15. #15

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    This is beautiful .... Definitely a must have
    Last edited by Ralfoudari; Jan 13, 2014 at 4:36 AM. Reason: first time blogging

  16. #16

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    I am interested in buying the HIC full front urethane rubber body panel ... Please add me to the list and let me know how to make the payment

  17. #17

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    How do I buy this casting? I am new to this and would love to make this for my man cave. I live in Adelaide, South Australia. Do you ship here. When will then be available?

  18. #18

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    Hi. Not sure where the waiting list stands, but i'd like to get on the list. I'd love to have the partials, so let me know if that is an option. Looks like you may churn some partials out from time to time. Just let me know. Thanks in advance.

  19. #19

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    Please add me also Thanks

  20. #20

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    Greetings. I am also interested. Please add me to the list if there is one. Thanks!

  21. #21
    FettFanatic's Avatar
    Member Since
    Aug 2006
    From
    Oklahoma City
    Posts
    749

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    I am pretty sure Darthchromer is taking a break from casting things.

  22. #22

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    Thanks for the heads up.

  23. #23

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    Any chance a new run of these will be started?

  24. #24

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    Yes please contact me if there's a new run of these!

  25. #25

    Re: Interest: HIC Full Front Urethane Rubber Body Panel Run

    Hi, was wondering when your next run is going to happen?

Similar Threads

  1. FS: HIC front castings urethane flex 60
    By radion2003 in forum The Cargo Hold
    Replies: 5
    Last Post: Jul 19, 2013, 11:48 AM
  2. help! Need to find HIC front panel
    By trickysix in forum The Sarlacc Pit
    Replies: 5
    Last Post: Jan 17, 2011, 4:14 PM
  3. Thickness of Stormriders HIC front panel
    By Encased in forum Han Solo in Carbonite
    Replies: 10
    Last Post: Apr 3, 2010, 1:10 AM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •