Overview

Mitrinomon Z-6 Rocket Pack (custom written papers)

"Turbo-Projected Magnetic Grappling Hook with 20-Meter Lanyard: Can use 100-meter-long cord. Which (inside launcher) lifts up to 100 kilograms. can replace with Anti-Vehicle roaming Missle.

"Rocket Thruster Fuel Tanks: Fuel tank holds enough fuel for one minute of continuous operation. (20 three-second blasts.) Each three-second blast moves Fett up to 100 meters [328 feet] horizontally or 70 [230 feet] meters vertically. Top speed of 145 kilometers per hour; maximum range of two kilometers.

"Directional Thrusters: Gyro-Stablizers apply conterthrust for maneuvers and landings." -The Essential Guide to Weapons and Technology

This is the backpack worn by Boba Fett. It is sometimes referred to as a rocket pack, but TDH has standardized on calling it "Jet Pack."

Boba Fett's jet pack remained pretty consistent throughout pre-production to film. The most notable difference between each jet pack would be the paint colors and weathering.

Other such differences include the placement of the greeblies seen on the Preproduction 1 to the inside seen in Preproduction 2.

A few more interesting things to note about the packs, which we will describe here.

Beacon

There were 2 different styles of beacon used in the films, which seems to vary slightly from the Preproduction 1 jet pack. Take a look at this comparison of exhibit photos.

Note that the top appears to be brass, and that the size and shape differs between the MoM pack and the one seen in other exhibits.

Boba Fett Concepts Jet Pack

For detailed information regarding each part of the Boba Fett Concepts costume, see Boba Fett Concepts Costume Details

Super Trooper Boba Fett Jet Pack

For detailed information regarding each part of the Super Trooper Boba Fett costume, see Super Trooper Boba Fett Costume Details

Holiday Special Boba Fett Jet Pack

For detailed information regarding each part of the Holiday Special Boba Fett costume, see Holiday Special Boba Fett Costume Details

Preproduction 1 Boba Fett Jet Pack

For detailed information regarding each part of the Preproduction 1 Boba Fett costume, see Preproduction 1 Boba Fett Costume Details

The Preproducion #1 and Preproduction #3 Rocket Packs are the same pack.

The greeblies seen on the bottom consist of a BNC Female Chassis Mount Solder Connector, a XLR Male 3-Pin Chassis Mount and a XLR 5-Pin Female Chassis Socket Connector. The other two greeblies have not been positively identified, but are speculated to be a regulator pin and a gas related quick disconnect coupling.

The Rocket Pack Stabilizer (or Targeting Range Finder according to the Visual Dictionary) is the foot stand from a Michell Engineering Turntable Sweep Arm.

Preproduction 2 Boba Fett Jet Pack

For detailed information regarding each part of the Preproduction 2 Boba Fett costume, see Preproduction 2 Boba Fett Costume Details

The greeblies seen on the inside face consist of BNC Female Chassis Mount Solder Connector, a XLR Male 3-Pin Chassis Mount and a XLR 5-Pin Female Chassis Socket Connector. The other two greeblies have not been positively identified, but are speculated to be a Regulator Pin and a Quick Disconnect coupling.

The Jet Pack Stabilizer (or Targeting Range Finder according to the Visual Dictionary) is the foot stand from a Michell Engineering Turntable Sweep Arm.

Preproduction 3 Boba Fett Jet Pack

For detailed information regarding each part of the Preproduction 3 Boba Fett Fett costume, see Preproduction 3 Boba Fett Costume Details

The Empire Strikes Back Boba Fett Jet Pack

For detailed information regarding each part of the Empire Strikes Back Boba Fett costume, see The Empire Strikes Back Boba Fett Costume Details

Return of the Jedi Boba Fett Jet Pack

For detailed information regarding each part of the Return of the Jedi Boba Fett costume, see Return of the Jedi Boba Fett Costume Details

There are at least four identified jet packs used for Return of the Jedi. One jet pack is currently owned by Steve Sansweet, the Director of Content Management at ILM.

The Return of the jedi jet pack maintains the original concept seen in the pre-production versions. The jet pack is a fiberglass/resin construction with various foudn items, and painted using Floquil model train paints and Grumbacher Miskit Liquid Frisket for masking.

The only identified foudn items on the jet pack consists of the Stabilizer (or Targeting Range Finder according to the Visual Dictionary). The Stabilizer is the foot stand from a Michell Engineering Turntable Sweep Arm.

The jet pack is hooked onto a Harness that is worn under the Vest. The Harness has not been yet identified, but is another found item.

Special Edition Boba Fett Jet Pack

For detailed information regarding each part of the Special Edition Boba Fett costume, see Special Edition Boba Fett Costume Details

Boba Fett Touring Jet Pack

For detailed information regarding each part of the Boba Fett Touring costumes, see Boba Fett Touring Costumes Details

Boba Fett Stunt Jet Packs