Tie Pilot Chestbox

Scoutleader

Active Hunter
I am currently in the process of gathering materials to butild my chestbox for the 181st Tie Pilot suit.
I am need some help the face of the chestbox.I am wanting to build mine to be funtucial with lights,a fan and microphone.
Does anyone know of a source to get the three switchs that will work?or know of a source who make them?
Any and all help would be great
 
Hello Lopero,

I think you can buy a cheap real switch like this one (it's my room's switch :p) and resize the buttom if you don't find any of the measures you want. If you need it bigger you can use plasticard. If you need it smaller you can cut it with a dremmel and then use plasticard to cover the hole you have created. But be careful, you want to keep untouched the flip-flop system inside. Now... you only need to create the electric circuit with your REAL switch! If you don't know how to do it I can help you with it. Just ask ;)

30b3ehs.jpg
 
Last edited by a moderator:
This thread is more than 14 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top