DC-15s

Brail khan

Active Hunter
what do you think of my wip?

050.JPG


058.JPG


057.JPG


049.JPG


052.JPG


056.JPG


061.JPG


063.JPG


048.JPG


062.JPG


055.JPG


046.JPG


047.JPG


059.JPG


053.JPG


054.JPG


060.JPG


051.JPG
 
here's a few more pics of the pistol, and I wanted to make a small holdout blaster, so I scaled down Rex's pistol and came up with this:

073.JPG


076.JPG


068.JPG


071.JPG


070.JPG


069.JPG


067.JPG


066.JPG


074.JPG


075.JPG


072.JPG
 
I applied wood filler to all the edges to seal up the foam, and I will get on with sanding them tonight,I will then apply 2 coats of resin to these and sand and then primer to find any problem areas.I have already made more cutouts with the templates I made,and I will be making more of these....I have very few reference pics and I am using a little creative freedom on this,but I will try to get them as close to the pics as I can. I will get a finished product up soon, so if anyone is interested in one hit me up here or with a p.m. These were fun to make and not too time consuming so far. Let me know what you guys think...Thanx!

Chris
 
Last edited by a moderator:
yeah those look great, i actually did see this before and its why i decided to make mine like this instead of using the pepakura file.
 
Those are fantastic! Keep up the good work. :) I may have to try this method, seeing as I've got lots of left over Fiberglass Resin.
 
here are the updated pics of the newest blaster I made, I changed several pieces design and made the hand grip and trigger area larger.That said, I was making these as kits over
at the HHS forum. I sold a couple kits, but have decided to abandon the project. I gave away a set over there and only asked for feed back from the recipient, I received said
feedback appreciatively. Now I want to give something back to those on TDH whom I have enjoyed reading posts and seeing progress from. I have 1 kit remaining with enough parts to make 1 pistol. Only assembly required. I want to have a drawing for someone to receive the kit: I will pic a name from the first 10 to enter , or will draw on 8/22...which ever
comes first. This kit needs a home, and you can't beat free. It will be shipped gratis, no strings. My way of giving back for all the enjoyment I've received here!Good luck!

1.Kal'ika
2. TxFett

132.JPG


134.JPG


136.JPG
 
Last edited by a moderator:
This thread is more than 9 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top