Rav Bralor progress thread (big build pics)

lonewolf 1183

Active Hunter
So I figured I'd post up some progress pics of the Rav Bralor I'm building for my girlfriend. These are some of the first pictures, and admittedly I'm horrible about taking any amount of progress pics. I'm attempting to get this done for WizardWorld Philly in a little over a month. I'm going for my own artistic interpretation of the sum of the reference available. Before you get worried, I'm going to do it justice. I like Mandos, and strive to always do them right. You could say that I'm going for an idealized version of the Action figure the most (shape of some of the armor and cape and other little details)

So enough words from me, on to the giant pics!:)

First the armor- I racked my brain to figure out how to do it, decided it wasn't worth sculpting and casting my own, wasn't completely thrilled with what I saw out there and then had a flash of genius. Bought a plastic mannequin half torso of ebay that wasn't too "realistically sexy" in its sculpt:lol: and that would accommodate my girl's form. Drew the armor on the torso, sat down with an xacto and there you have it. Best part: $30 bucks shipped and just a little time with a marker, ruler, and xacto.
IMG_1069.jpg

IMG_1077.jpg

Cod is one of those cheapo sintra ones I mistakenly got off ebay awhile ago, but its the right size proportionately for her, so a little TLC to sculpt up so it looked more like a fett cod and it was good to go. The Knee and foot armor is .25" sintra cut out and heat bent into a curve. Some PVC tube pieces were blended onto the outside of the knees and will have fett style darts put inside them.
IMG_1078.jpg

Flightsuit was a generic flight suit/ coverall she found for cheap at some point. Removed all the pockets and took it in since it was a little baggy. Pocket material will be used to make the arm pouch. Armor vest is made from fabric we found at Wally world for cheap. We decided we wanted to have a Fett style armor vest, since it would look best and fit with the typical mando armor set up. We looked for a fabric that was a similar grey but possibly a little different in material and shade (just like fett in ROTJ). This stuff works great. There is no existing ref for the pattern, but I decided to throw in the fett style shoulder stitch lines, just to add more detail.
IMG_1088.jpg

IMG_1095.jpg

Here's the armor as it stands taped up to a another mannequin she had. The girth belt is hand made, used cotton clothesline from walmart dyed brownish grey, I dyed some leather and made some ends to it that have buckles with leather straps. The Ammo belt is entirely hand made by me. I made patterns and dyed the leather and hand stitched the pouches together. They're all functional as well. The little back cylinders are just pvc pipe filled with resin, and capped with a snap dome and a resistor sticking out the other end. The large cylinders are R2 ankle cylinders with one tab cut off. I did this for to reasons- 1. I had a Ankle cylinder I had made from PVC pipe so why not mold it and cast a few and 2. It fits in the star wars universe design style. Detail pieces were used in multiple places all the time. So they look like they belong, and there's extra detail with the scribed lines and tabs on the end that isn't in the artwork.
IMG_1091.jpg

IMG_1092.jpg

IMG_1093.jpg

And here's most of the parts laid out on the cape rectangle. It's a wool outside (just an interesting weave that was on the cheap remnants table at Joann's) with a wrinkly cotton lining (same source). You can also see I added some tabs on the cod piece- probably won't be seen but it just brings it more into the reality that Fett's armor existed in, right? Its all about adding in the layers of detail.
IMG_1094.jpg

And this is a blank cylinder of polyurethane foam. I shaped two of them into a tapered cylinder and will be sculpting up the gauntlet details on top of them. I'm going to go for an overall Fett style gauntlet like the figure, but with some of the little details worked in from the comic reference images. Plan is to make a mold of the sculpts and cast them in resin (so who know's there may be some for sale in the future);)
IMG_1084.jpg


That's it for now, hope you enjoyed. I'll try to update this thread as I go along. Later
 
mannaquin torso...brilliant...why didn't I think of that??? :p I'm liking the spikey boot plate things...spikes are always good...(y)(y)

great work!!! I want to see more!!!
:cheers
A'den
 
Very nice work so far! I did a Rav inspired set out of aluminum for a friend at DCon last year.

The only part of the armor I would say to think about is the cod armor. I had some complaints that a male type cod can be uncomfortable on a woman, so I made a pattern for a cod directly influenced by the smaller "bikini" style cod of Rav/Vhonte from the Tom Hodges art. If you want a copy let me know and I can email you the PDF pattern.

Using a mannequin for chest plates was just complete genius. =)
 
I saw that armor build and was impressed with it.
Luckily The cod I'm using was undersized for a guy to begin with. So it actually fits her ok. (In my opinion the regular cod is uncomfortable for guys too) I've never been as big a fan of the 'Bikini' skinny cod piece, just not for me. I think the fett's style cod just looks better with the armor.

Tonight I'm going to finish up the work on the knees and start marking up/ building up the gauntlet sculpts a bit.
 
amazing work so far... really liked how you used the mannequin, just brilliant

cant wait to see how this comes out... keep up the good work.
 
worked a little on creating the cape neck ropes (again, going for an idealized version of the figure) this weekend while at Steel City Con, but since I was doing an armor panel and helping out didn't get much work done. Planning on gauntlet work this week. Will post pics as I get more done.
 
lonewolf_1183, you continue to amaze and impress me with your style and ability to create these great customs! cant wait to see more!
 
yeah sorry about that, I'm horrible about doing constant updates.
I have been doing small things with it. I made some progress on the gauntlet sculpts. I'd say they're a third of the way there. The right just needs to be sanded some more, more filler putty, sanded, and coated in primer. I need to finish building up the left gauntlet and then fill it and sand it.

Again, for those just joining us;); I'm not going for any specific piece of reference on this character. I'm sticking closer to the action figure for the most part as it is a constant in its details, whereas the comic illustrations vary. And I like the idea of making things that look like they belong in the same family of form as the Fetts (thus the Boba style armor vest) So you could say I'm doing an idealized version of the action figure, but I am working in some details of the comic art. You may be ably to pick out some of the extra box or panels on the gaunt that are inspired by the comic art. On to the pics!
IMG_1105.jpg

IMG_1106.jpg
 
the gauntlets are coming together nicely. and the rest of your armor is looking good too :)
 
Last edited by a moderator:
Ya, I did that when I first tried to make female chest armor. It is not easy to figure out the actual size, or cup size. And the ones that actully state the size are not so inexpensive. The manequins don't really work for a "real" female chest. The abs end up small as well. Which is why I sculpted my own, because the curves and shape from those don't really fit too well, and you have to account for the undersuit and vest, which adds layers, they do not fit the curves of the chest. But, it is a cheap way of getting female chest armor! I just feel they are too pointy, and no actual size, but a A or B cup, with no definition, it could work. But any way, I like the way female armor is coming along, and all props to those who do what they gotta do! I do like the leatherwork you got going on! And I really like the Rav/Vhonte look, what a fun set of armor to build!
 
Last edited by a moderator:
This thread is more than 10 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top