best method of weathering

  1. #1
    morpheus1977's Avatar
    Member Since
    Jul 2006
    From
    San Diego Ca,
    Posts
    377

    best method of weathering

    so my bucket is primed all I have to do is go out and by the colored paints a bid decision in this will be weathering I plan on using a black(main bucket) and gray/silver(visor ear pieces) color scheme. How I plan on doing this is.
    1 spray the visor and ear pieces black and the bucket silver
    2 tape of areas with riped tape for battle damage and weathering
    3 reapaint the visor and ear pieces gray and the main bucket black (possibly gloss black)
    4 remove the tape to show the weathering and battle damage
    if any body else knows a better method please let me know...

  2. #2
    TeamFett's Avatar
    Member Since
    Apr 2005
    From
    Flagstaff, Arizona
    Posts
    1,303

    Re: best method of weathering

    Instead of ripped taped you could try some masking fluid. You can paint out it out in any shape you want. Not so limiting as strips of tape, which in the end after you pull them off might just look like...strips of tape.

  3. #3
    morpheus1977's Avatar
    Member Since
    Jul 2006
    From
    San Diego Ca,
    Posts
    377

    Re: best method of weathering

    well when I say strips of tape I will tear them in such a way they wont look like strips they will have jaged edges they just wont be straight edges. BTW I have never heard of masking fluid how does that work?

  4. #4

    Re: best method of weathering

    With masking fluid, you have alot more control over the shape and size of the scratch. You just brush it on in whatever way you need it to look like, spray on the next coat, wait for it to dry, then wash off the helmet so the fluid comes off leaving silver scratches. Also, instead of masking fluid, you could use mustard or toothpaste the same way.

  5. #5
    morpheus1977's Avatar
    Member Since
    Jul 2006
    From
    San Diego Ca,
    Posts
    377

    Re: best method of weathering

    you just saved me some money, LOL tooth paste it is LOL

  6. #6

    Re: best method of weathering

    Yea, depending on the under coat go with toothpaste. Mustard will stain white paint yellow.

    In case anyone wanted to use this method on a clone helmet, or similar.

  7. #7

    Re: best method of weathering

    Yeah, I'll be using toothpaste, mostly because I'd rather smell a minty freshness than old mustard while brushing it on and washing it off.

  8. #8
    SarlaccBits's Avatar
    Member Since
    Jan 2006
    From
    California
    Posts
    1,409

    Re: best method of weathering

    TAPE SUCKS!
    Go with the fluid or hand-paint on your weathering.

  9. #9
    morpheus1977's Avatar
    Member Since
    Jul 2006
    From
    San Diego Ca,
    Posts
    377

    Re: best method of weathering

    well I started my bucket I got the primer on yesterday and I just did the visor outline and details as soon as it dries I will be doing the top part of the "cheeks"(dont know the actual name) in a pewter gray and then the rest will be in a gloss black.

  10. #10
    Cruzer's Avatar
    Member Since
    Aug 2004
    From
    Porterville, California
    Posts
    2,747

    Re: best method of weathering

    Looking good.

    But before you proceed any further, I would recommend reinforcing the back base of your helmet with a strip of 3/4" wide aluminum stock so you can give you helmet a decent shape and to give it some sturdiness so any movement of the helmet doesn't start cracking your new paint job.

    Just my opinion but I'd hate to see your new paint job runined because the helmet starts bending too much. Here's a pic showing how I reinforced a Rubies. You can use some 2 part epoxy Platic Welder from walmart as your adhesive since it's somewhat flexible and will give a little with your helmet.


    Cruzer
    Attached Thumbnails Attached Thumbnails dsc01131-jpg  

  11. #11
    arctroopomega5's Avatar
    Member Since
    Apr 2006
    From
    The Desert, Cali
    Posts
    221

    Re: best method of weathering

    I've learned first hand that the blue tape, for lack of a better word, sucks. Tried weathering with it but when I got it off it also took paint off leaving an extremely ugly texture underneath. Since then what I've done is paint 3 chrome layers, then paint my chosen color over it and let the drip of the paint weather itself, I've gotten great looking results.

  12. #12
    I helped at SDCC '08 GCNgamer128's Avatar
    Member Since
    Jan 2006
    From
    Las Vegas, Nevada USA
    Posts
    5,520

    Re: best method of weathering

    I almost lost my ESB paintjob on my bucket because the blue tape just stripped off the coat underneith. I don't think I sanded it perfectly though.

  13. #13
    Satxer's Avatar
    Member Since
    Jan 2006
    From
    Near Cleveland, Ohio, USA
    Posts
    838

    Re: best method of weathering

    I would say play in the mud and sand for a lil.

  14. #14

    Re: best method of weathering

    [FONT=Arial]I've tried a number of methods over the years and found the following to have worked for me:[/FONT]
    [FONT=Arial][/FONT]
    [FONT=Arial]1) If you want the chipped effect, primer, chrome, mustard/toothpaste and then paint. Wait until the paint is semi-dry and then pyut the armor under cold water and rub the mustard areas with your finger. The paint will peel back as the mustard dissolves and you'll get nice ridges.[/FONT]
    [FONT=Arial][/FONT]
    [FONT=Arial]2) Dual layer weathering looks the most natural. (like Boba's chest armor) The first layer I use is usually flat grey to indicate a primer and then silver to show the base metal. The Boba armor uses that zinc chromate to represent the primer.[/FONT]
    [FONT=Arial][/FONT]
    [FONT=Arial]3) Topical weathering where the primer and silver are applied on top of the top paint colors can actually look pretty good as long as you adhere to #2.[/FONT]
    [FONT=Arial][/FONT]
    [FONT=Arial]4) With the suit I'm currently working on, I may actually kick it around the back alley a little. The armor will be aluminum or pewter colored so I don't want to show a primer since it's supposed to be base metal anyway.[/FONT]

Similar Threads

  1. BBF Weathering Flight Suit...New Method ???
    By BooBoo Fett in forum Boba Fett Costume
    Replies: 7
    Last Post: Jul 22, 2011, 1:04 PM
  2. Best method for repairing fiberglass
    By Scooter in forum Boba Fett Costume
    Replies: 4
    Last Post: May 26, 2009, 6:32 PM
  3. Question: Would this painting method work?
    By blur in forum Prop Building Workshop
    Replies: 7
    Last Post: Dec 1, 2008, 8:49 AM
  4. Gauntlet attachment method
    By Slowmo in forum Boba Fett Costume
    Replies: 13
    Last Post: Sep 26, 2003, 11:09 PM
  5. Perhaps a new fastening method...
    By Nicholas Wolfwood in forum Boba Fett Helmet
    Replies: 8
    Last Post: May 21, 2003, 5:19 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •