A'den's Jason_Strk helmet WIP

Aden Kyramud

Active Hunter
Hi vode!

As some of you know, I recieved my new helmet from Jason_strk...for those of you who dont know, now you do. ;) It was a VERY nice helmet right out of the box, but of course, I couldnt leave it alone, so I've done some work to it...

Here are the pics...it's not yet quite complete (as you will see) because of school, life and some very strange rain storms that have been causing my paint to dry at a horifically slow rate...:facepalm

Anyways, here is the progress...

Initial sanding...
484658870_1699750668_0.jpg

484659220_1699751982_0.jpg

484659348_1699752483_0.jpg

484659457_1699752885_0.jpg


Some 2mm plastic to outline the rim...
484659638_1699753564_0.jpg

484659899_1699754559_0.jpg

484660132_1699755451_0.jpg

484660440_1699756609_0.jpg

484660676_1699757545_0.jpg


Some bondo glazing putty to appease my perfectionist side...
484660944_1699758601_0.jpg

484661384_1699760274_0.jpg

484661842_1699762010_0.jpg

484662147_1699763185_0.jpg

484662587_1699764876_0.jpg


Primer...
484662660_1699765174_0.jpg

484662761_1699765647_0.jpg

484662952_1699766371_0.jpg

484663048_1699766704_0.jpg


And a tease on the colour scheme...;)
484663373_1699767920_0.jpg


I've done more work, but no pics of it...yet...once this rain stops, armouring will commence as usual here...(Kal, your helmet is getting more bondo!!! :D) and piant will be added to this helmet, &c.

As always,
:cheers
A'den
 
This thread is more than 14 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top