what should i use to make an army of two mask?
- Thread starter popogun
- Start date
MADDMUDDER
Jr Hunter
Ha ive done this before. I used wall putty on a cardboard mockup. once it dries sculpt sand chisle any design you want. hit it with a laqure and it seals.
Then paint.
Then paint.
MADDMUDDER
Jr Hunter
no for that resin would be required
MADDMUDDER
Jr Hunter
Your best bet for paintball use would be to get a mask from jt , remove the visor, straps. then mask the outline of the shape you want. use a dremel or carpenter knife to remove umwanted portion of mask. Then cover the mask in masking tape to give you the eyes you want. once your rough design is in place build up the shape of the eyes. clay c board sintra foam. Anything wil work. After the construction of the eyes are in place Fiberglass the mask 1 good time and let it dry! WELL VENTELATED AREA
Wear gloves and long sleeves. Once FG drys sand and repeat until your design is perfect. Good luck PM any questions.
Wear gloves and long sleeves. Once FG drys sand and repeat until your design is perfect. Good luck PM any questions.
MADDMUDDER
Jr Hunter
no problem
Similar threads
