Subscribe
  1. evan4218's Avatar
    Member Since
    Nov 2005
    Posts
    1,789
    Apr 7, 2006, 10:21 AM - Tools for Cutting Acrylic #1

    whats the best tool for cutting acrylic, I know the awnser is not a dremmel but there are so many types of saws out there.

    Thanks
    Justin
  2. Ripcode's Avatar
    Member Since
    Nov 2005
    Posts
    2,268
    Apr 7, 2006, 10:26 AM - Re: Tools for Cutting Acrylic #2

    Grabbed this from a website:

    Table/Circular Saw:
    For rough cutting acrylic, you can use a table saw or a circular saw with a fine blade. Blades with fine closely spaced teeth (like those used for plywood) will work relatively well. Blades with widely spaced teeth (like the type used for cutting MDF) will cause a lot more chipping. I've used an Oldham B7254760 on a circular saw with good results. When using a hand held circular saw, use a guide to make sure you get a straight cut with minimal chipping. There are blades made specifically for cutting acrylic. If you're going to be cutting a lot of acrylic or are using very expensive (thick) material, you need to invest in a blade specifically designed for cutting plastics and laminates.

    Jig Saw or Band Saw:
    Jig saws can be used to cut acrylic when you need something other than a straight cut. To reduce the work of cleaning up the cut, use the finest blade that you can find. Blades with reduced depth (like those used for scroll work - shown below) will work best due to less friction and less resistance when turning the blade. You'll have to experiment with cutting speed to see what works best. Too much pressure can cause excessive chipping. Going too slow may cause the acrylic to melt. If the acrylic melts when cutting, use a light lubricating oil. Have someone apply the oil to the blade as you're making the cut. DON'T use an aerosol dispensed oil. The propellant may be flammable and may be ignited by the jig saw motor. I've had good results with the blade shown below.
  3. MARROW SUN's Avatar
    Member Since
    May 2004
    Posts
    608
    Apr 7, 2006, 1:44 PM - Re: Tools for Cutting Acrylic #3

    Justin what equipment do you have access too? I would recommend a band saw. If you have a table saw use a 80 or 100 tooth blade, like ripcode said a laminate blade will work perfect.
  4. evan4218's Avatar
    Member Since
    Nov 2005
    Posts
    1,789
    Apr 7, 2006, 3:48 PM - Re: Tools for Cutting Acrylic #4

    Sweet, that would be perfect, thanks... I have access to almost anything, I am trying to find good tools to add to my own work area but between all my firends and family I have access to it all. They havea sale on band saws going on so I may take advantage. This should solve my issue of being able to cut acrylic for both visors and custom RFs...
  5. Ripcode's Avatar
    Member Since
    Nov 2005
    Posts
    2,268
    Apr 7, 2006, 3:52 PM - Re: Tools for Cutting Acrylic #5

    Quote evan4218 said:
    Sweet, that would be perfect, thanks... I have access to almost anything, I am trying to find good tools to add to my own work area but between all my firends and family I have access to it all. They havea sale on band saws going on so I may take advantage. This should solve my issue of being able to cut acrylic for both visors and custom RFs...
    Mmmm... Bandsaw...

    That is on my want list for future power tools.

    The jigsaw is not cutting it (excuse the pun! ). I use it to cut styrene and it does melt the plastic pretty quick.

Similar Threads

  1. Better paint than acrylic?
    By Commissar in forum Prop Building Workshop
    Replies: 8
    Last Post: Sep 13, 2009, 1:52 AM
  2. help...tamiya acrylic colours ??
    By HUNTER in forum Boba Fett Helmet
    Replies: 8
    Last Post: Jul 5, 2008, 9:07 AM
  3. Leather Cutting tools??
    By ZamaBama in forum Zam Wesell Costume
    Replies: 2
    Last Post: Aug 2, 2007, 5:12 AM
  4. Acrylic or enamel?
    By BobasBounty in forum Boba Fett Helmet
    Replies: 3
    Last Post: Sep 30, 2005, 2:25 AM
  5. enamel, acrylic, which to paint first?!
    By bobagoat in forum Prop Building Workshop
    Replies: 8
    Last Post: Jun 30, 2004, 12:38 PM