Iron Man Armor (Sintra) !WIP!

  1. #126

    Member Since
    May 2008
    From
    montreal, canada
    Posts
    3

    Re: Iron Man Armor (Sintra) !WIP!

    DangerRuss said: View Post
    Hey Batman, check out my flip up faceplate modification success!
    Hey Russ awesome job on the mask!!!! Best I've seen so far!!!!

  2. #127

    Re: Iron Man Armor (Sintra) !WIP!

    Heres the video for thr robot voice mod enjoy


    : : : :

    Click link Below
    ---------------------------------------------------------------------
    IronMan Robotic voice mod vid

    FUnny IronMan video
    Last edited by Masterle247; Jun 9, 2008 at 7:39 PM.

  3. #128

    Re: Iron Man Armor (Sintra) !WIP!

    Masterle247 said: View Post
    it is one piece, and the mobility is still very easy to move. Im redoing the shoes since im very picky, and doing another set of gloves with full coverage
    Hi, Im from Spain and I want to know if you selling your iron man suit. How much will be?

    thanks

    david

  4. #129
    fettfan54's Avatar
    Member Since
    Aug 2007
    From
    Kansas
    Posts
    89

    Re: Iron Man Armor (Sintra) !WIP!

    I too am wondering how much you might sell this for

  5. #130

    Re: Iron Man Armor (Sintra) !WIP!

    sry it not for sale

  6. #131

    Re: Iron Man Armor (Sintra) !WIP!

    Does anybody know where i can get stencils for the Iron Man Costume? I've made attempts to PM so people but they've yet to PM back. It's my first armor and i want to make it awesome!!

    oh yeah, go see Hulk!

    Shellhead

  7. #132

    Re: Iron Man Armor (Sintra) !WIP!





    neck piece added v1.0

  8. #133

    Re: Iron Man Armor (Sintra) !WIP!

    Nice! Whats it made of? Also what kind of poster board did you use? I still cant believe its just board.

  9. #134

    Re: Iron Man Armor (Sintra) !WIP!

    Shellhead1987 said: View Post
    Does anybody know where i can get stencils for the Iron Man Costume? I've made attempts to PM so people but they've yet to PM back. It's my first armor and i want to make it awesome!!

    oh yeah, go see Hulk!

    Shellhead
    I don't think anyone has a template for an Iron Man costume. I read in one post, I think on the rpf, that someone was trying to get the 3D model used in the pc game, but I never followed up on their progress. I'm working on a small War Machine for my son for Halloween, and it's all from the ground up. And very slow. Good luck finding what you need.

  10. #135

    Member Since
    May 2008
    From
    sf bay area
    Posts
    21

    Re: Iron Man Armor (Sintra) !WIP!

    nice work Anthony! Just wanted to let you know I'm work on a CG/2d animated Iron Man+war machine short movie. Here is my latest work on my suit. I'm working on the arms. I have a question. What paint did you use to waterproof your suit???/
    Attached Thumbnails Attached Thumbnails 0a3850a930eb-jpg   847438ec1716-jpg   8192278ba6bb-jpg  

    Attached Images Attached Images  

  11. #136

    Re: Iron Man Armor (Sintra) !WIP!

    Hey everyone... I was checking out the site and ran across this thread... I must say.. great work guys!!!

    I have a little info that might help you all out on the repulsers and the chest piece.

    I made this up just for shoots and giggles from some spare lights...

    Its ultra thin and mega bright

    The lights are LED fixture Lights from Ikea..

    http://www.ikea.com/ca/en/catalog/products/20119932



    they are 12 volt.. so i just shortened the wire.. and made a simple power pack with a 12 volt mini battery from a car alarm clicker, a radio shack switch and some electrical tape. Then I sewed it to a glove ( the bezel separates off of the light )and I run the wire over my hand and between my fingers and strap it all on with the switch/power pack at the base of my hand on the back. It allows me to turn the light on and off with only a flick of the wrist.
    Attached Thumbnails Attached Thumbnails photo-2-jpg   picture-002-jpg   picture-003-jpg  

    picture-004-jpg   picture-005-jpg  

  12. #137

    Member Since
    May 2008
    From
    sf bay area
    Posts
    21

    Re: Iron Man Armor (Sintra) !WIP!

    sweet!!!! My original replusors were like yours, but I felt they were to big and I couldn't close my hand. so I took a tap-lite apart with 3 lights and put it into a plastic bottle and ran the wires in much the csame way as yours. I love your ideal about the flick of the wrist to activate the light...vewry cool!!!!!!!!!!!!!!

  13. #138

    Re: Iron Man Armor (Sintra) !WIP!

    yes they are a bit large in the palm as far as the diameter is concerned.. but they are nowhere near as thick as a tap light. I like them because they are the right size or so... I want to incorporate them into the glove more.. like sewn in so that it is more flush with the surface.

  14. #139

    Re: Iron Man Armor (Sintra) !WIP!

    the best one I have ever seen will debut at Dragon*Con this year... its vacformed, and looks dead on to the movie suit. the freaking arm even opens and the rocket launcher comes up. absolutely nuts.

    he's only posting progress in one place, so I dont wanna cross post it with out his permission, but if you are a member of the colonial fleet, its on their boards. but I cant wait to see that bad boy in person!

  15. #140

    Re: Iron Man Armor (Sintra) !WIP!

    here are some update pictures
    sorry for the bad camera quality









    Front Comparison of before and after
    V1.0 specs
    -----------------------
    -Unfinished round shape helmet
    -No shoe covers
    -No neck cover
    -No added cover for leg armor
    -No lighted eyes
    -No robotic voice
    -No flip up helmet
    -Repulsor Gaunlets v1.0
    -Abdominal area v1.0

    V2.0 Specs
    --------------------------------
    -Neck piece v3.0
    -Flip Helmet with lighted eyes v4.0
    -Hidden mic in helmet "When spoken in to sounds like a robot v3.0
    -Chest light v2.0 "currently being upgraded to exact movie specs
    -Repulsor Gaunlets v2.0
    -2 Hidden Speakers hooked up to an mp3 player "IronMan theme song" v2.0
    -Boots v2.0
    -Shoes v2.0
    -Croach piece v2.0
    -Abdominal area v3.0
    -Added Fuselage v2.0
    -Added Side Vents v1.0
    Last edited by Masterle247; Jun 29, 2008 at 2:22 PM.

  16. #141

    Member Since
    May 2008
    From
    sf bay area
    Posts
    21

    Re: Iron Man Armor (Sintra) !WIP!

    did you use the foam on the croach area also? I see you used some of my ideas...
    The voice box, hidden speakers + mp3. Damn I have to say you did a great job on your suit!!!!!

  17. #142

    Re: Iron Man Armor (Sintra) !WIP!

    the_batman said: View Post
    did you use the foam on the croach area also? I see you used some of my ideas...
    The voice box, hidden speakers + mp3. Damn I have to say you did a great job on your suit!!!!!
    yeah i used the foam in the croach area too. O yeah for the water proofinh i used primer, then krylon paint sealer.

  18. #143

    Member Since
    May 2008
    From
    sf bay area
    Posts
    21

    Re: Iron Man Armor (Sintra) !WIP!

    oooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooo... that is so tight!!!!!!!!!

  19. #144

    Re: Iron Man Armor (Sintra) !WIP!

    The_batman you have any update pics? im curious on how its comming out.

  20. #145

    Member Since
    May 2008
    From
    sf bay area
    Posts
    21

    Re: Iron Man Armor (Sintra) !WIP!

    none latley... I'm having trouble with the shape of the chest piece...

  21. #146

    Re: Iron Man Armor (Sintra) !WIP!

    Drool, drool, drool.
    Any chance we will get a pattern to download?

  22. #147

    Re: Iron Man Armor (Sintra) !WIP!

    I've been following this thread now for a little while and I must say I'm really impressed by the creativity and skill you all have. MASTERLE247 I was curious if you have any shots of your helmet in the works...and also of the lifting face conversion. I'm also using the child mask from walmart to make a full scale helmet and would love to see your process. thanks much

  23. #148

    Re: Iron Man Armor (Sintra) !WIP!

    Sorry ALL! I feel like an *** for not posting in here so long, when starting this project I saw things people started working on for Iron Man armors (well before the movie) and then just disappeared mid-work without any updates.

    Main reason I haven't posted here is because I don't really have anything new to post about. A number of things have kept me from doing work on the suit, mainly Real Life issues, other projects and hobbies, a little bit of being bummed trying to work out flexing/bending/rotating joints for things like elbows, knees, thighs, etc. Some things were definately easier then I had expected, the chest piece came out much quicker and easier then I had expected. Other things, like the aforementioned joints, and mask, and a glove easily "useable" that still looks good and professional have been much harder than expected. The one glove I did make works pretty well, and is pretty "useable", but it's hard to hold a beer mug snugly with the glove (figured this out on halloween ).

    Anyways, I'd love to get back into working on this and maybe even see it to completion (still got tons of Sintra sittin around my room, all the bits n pieces are startin to get in the way!), and if i do start work again, you all will be the first to know about it! Thanks for all the support and the views, I was worried when first starting here, that I would get a buncha "you aren't making something Star Wars, you suck! Go away!" hehe.

    Here's to hoping I get the will and the interest to start this project up again and finish it, in one form or another.

  24. #149

    Re: Iron Man Armor (Sintra) !WIP!

    Wow I haven't been on this site in ages and now I see a few people working on this suit. Crazy progress you all have made on this. Inspiring to say the least. I just started working on my War Machine progress, what little there is, use pepakura method.


    the_batman - I like the idea you have with the arms and adding a joint piece there. Nice touch!

    Masterle247 - Got any more progress? I'm on your myspace friends list so I can keep up if you blog there. Great work as always.

    Elepski - I'm liking the idea with the IKEA lights. Not to begrudge anyone one who wants to DIY their own, but sometimes grabbing a premade object like this works just as well.

    Keep up the good work everyone.

  25. #150
    cidvicious831's Avatar
    Member Since
    Oct 2008
    From
    santa cruz, CA
    Posts
    9

    Re: Iron Man Armor (Sintra) !WIP!

    check my mark 1 suit out. sucks cuz in the end of the day it got destroyed. i hope i could build a mark 3 suit next. made out of somthing strong. http://http://cidvicious831.deviantart.com/art/my-mark-1-suit-102855823

Similar Threads

  1. Important!: New in board, Working on Iron Man armor
    By levican in forum Prop Building Workshop
    Replies: 13
    Last Post: Jun 18, 2010, 1:15 PM
  2. Iron Man Armor
    By Buxzzix in forum Prop Building Workshop
    Replies: 82
    Last Post: Jun 18, 2010, 12:47 PM
  3. Question: I want to build Iron Man Armor but what do I need?
    By Iron Man in forum Prop Building Workshop
    Replies: 7
    Last Post: Mar 4, 2010, 1:57 PM
  4. WiP: Iron Man Heavy Artillery Armor
    By Darth_Sean in forum Prop Building Workshop
    Replies: 47
    Last Post: Aug 4, 2009, 3:57 PM
  5. Iron Man Mark 1 armor
    By Agent007 in forum Prop Building Workshop
    Replies: 11
    Last Post: Jun 20, 2009, 5:07 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •