Page 2 of 3 FirstFirst 123 LastLast
Subscribe
  1. May 21, 2014, 1:43 PM - Re: Uproar - The Helmet Hearing Aid #26

    OooOo im gonna want to try one of these! If the mic is the same size (or close to) as the borden, you may be able to mount it behind that if you have a metal one that has the holes all the way through.
  2. Member Since
    Feb 2013
    Posts
    29
    May 21, 2014, 1:58 PM - Re: Uproar - The Helmet Hearing Aid #27

    I'm not sure how big the borden is, but the default mics I use are 9.7 MM across. I do have some other mics I need to test out, most of which are much smaller
  3. Roddie Fett's Avatar
    Member Since
    May 2008
    Posts
    149
    May 21, 2014, 2:30 PM - Re: Uproar - The Helmet Hearing Aid #28

    Awesome,I think I'm going to put small holes in the corners of my visor & mount them there.
    I doubt you will be able to notice it. I'll post pics when I tackle this.
  4. brandontrueblue's Avatar
    Member Since
    Nov 2012
    Posts
    276
    May 22, 2014, 7:44 PM - Re: Uproar - The Helmet Hearing Aid #29

    Thanks RF looking forward to seeing how your setup looks!
  5. Roddie Fett's Avatar
    Member Since
    May 2008
    Posts
    149
    May 25, 2014, 9:24 PM - Re: Uproar - The Helmet Hearing Aid #30

    Ok,I dont have it permently mounted in my helmet. But I did try it out with my helmet on today & I'm going to say that I'm pretty impressed. I had them hanging out of the bottom & I had my ear buds in. I had my wife stand with her back to me from about 8" away, the. I had her say a number so I could adjust the volume on it. I also tried it with it off & couldn't hear a thing. That was awesome. BUT the only problem I see might be if you are at a convention or somewhere with a lot of people of if there are cars driving by......you might pick them up all at once.
    But over all I like it.
    Last edited by Roddie Fett; May 25, 2014 at 10:12 PM.
  6. brandontrueblue's Avatar
    Member Since
    Nov 2012
    Posts
    276
    May 25, 2014, 11:13 PM - Re: Uproar - The Helmet Hearing Aid #31

    thxs, so did you drill holes near your visor to mount the speakers? when you say you have them on the bottom, do you mean near the cheek area on the bottom inside of your helmet? im just more of a visual person, when you can pls send a pic. thxs for the detail.
  7. Roddie Fett's Avatar
    Member Since
    May 2008
    Posts
    149
    May 26, 2014, 7:28 AM - Re: Uproar - The Helmet Hearing Aid #32

    No,I dident drill the visor yet. I just had them hanging out of the bottom,I wanted to see what they sounded like first.
  8. brandontrueblue's Avatar
    Member Since
    Nov 2012
    Posts
    276
    May 26, 2014, 11:09 PM - Re: Uproar - The Helmet Hearing Aid #33

    gotcha ok
  9. Wolfsburg's Avatar
    Member Since
    Dec 2012
    Posts
    239
    May 26, 2014, 11:50 PM - Re: Uproar - The Helmet Hearing Aid #34

    Just thinking out loud but I wonder if one had a hollow RF stalk, if a hearing aid like this could be hidden in some fashion in a modified RF topper?
  10. Member Since
    Feb 2013
    Posts
    29
    May 26, 2014, 11:52 PM - Re: Uproar - The Helmet Hearing Aid #35

    There are 2 mics, so I'm not sure if you mean to put them both in the topper or just one, but the default mics should fit. I'm also in the process of testing some upgrades for smaller mics as well. They're a bit more expensive, around $10 - $15 per pair, with shipping. I should have those tested out by next week, I hope.
  11. brandontrueblue's Avatar
    Member Since
    Nov 2012
    Posts
    276
    May 27, 2014, 1:07 PM - Re: Uproar - The Helmet Hearing Aid #36

    Thanks Bernarr, I am interested in the smaller mic setup. Will follow-up next week.
  12. Member Since
    Jul 2013
    Posts
    70
    May 27, 2014, 3:53 PM - Uproar - The Helmet Hearing Aid #37

    Has anyone posted a pic of this in their bucket yet??
    Quote Quote Posted from iOS app
  13. Jesuit24's Avatar
    Member Since
    Oct 2013
    Posts
    145
    May 31, 2014, 10:51 AM - Re: Uproar - The Helmet Hearing Aid #38

    I'm not very savvy with mics, so bear with me. A question for those with an Aker amp. Currently I'm getting massive feedback depending on the volume and placement of the amp's speaker to my mic, which is to be expected. My plan for buying this speaker system is to put each mic in the ears of the helmet, meaning they'll be right next to my headphones. So I was wondering how these two mics and a set of headphones (along with an Aker mic) would suffer in such close proximity? Is there the possibility of feedback from this setup?

    I'd also love to see bucket interiors with it in.
  14. Member Since
    Oct 2012
    Posts
    686
    May 31, 2014, 11:11 AM - Re: Uproar - The Helmet Hearing Aid #39

    I think you'd need earbuds with a setup like that. I'll be drilling out some parts of my helmet tomorrow at the shop, then installing this system using earbuds. I will post step-by-step pics of my progress. Here's hoping I can get earbuds in my ears with the helmet on...
  15. Jesuit24's Avatar
    Member Since
    Oct 2013
    Posts
    145
    Jun 1, 2014, 12:12 PM - Re: Uproar - The Helmet Hearing Aid #40

    Thanks that would be helpful.
  16. brandontrueblue's Avatar
    Member Since
    Nov 2012
    Posts
    276
    Jun 1, 2014, 1:07 PM - Re: Uproar - The Helmet Hearing Aid #41

    Great, looking forward to seeing your pics! thxs
  17. Member Since
    Oct 2012
    Posts
    686
    Jun 1, 2014, 9:42 PM - Re: Uproar - The Helmet Hearing Aid #42

    I posted a link to my WIP/finished pics. Lots of pics. LOTS.

    http://www.thedentedhelmet.com/f23/i...ing-aid-50106/

    Please leave feedback or suggestions on the thread.
  18. Member Since
    Dec 2010
    Posts
    33
    Jun 2, 2014, 12:57 PM - Re: Uproar - The Helmet Hearing Aid #43

    I definitley want in on the next run, i will be down for 2 of these.
    Last edited by BayneVhett; Jun 2, 2014 at 1:04 PM.
  19. Member Since
    Aug 2011
    Posts
    21
    Jun 2, 2014, 12:59 PM - Re: Uproar - The Helmet Hearing Aid #44

    Email sent.
  20. Member Since
    Feb 2013
    Posts
    29
    Jun 2, 2014, 7:16 PM - Re: Uproar - The Helmet Hearing Aid #45

    Next batch of boards is on the way, 50 coming on this order, so there will be plenty Necronaut- good idea on labeling the actual mics L/R, I'll start doing that from now on!
  21. Member Since
    Mar 2012
    Posts
    8
    Jun 5, 2014, 1:43 PM - Re: Uproar - The Helmet Hearing Aid #46

    Please put me down for one from your next batch.

    Have PayPal, will purchase!
  22. Jesuit24's Avatar
    Member Since
    Oct 2013
    Posts
    145
    Jun 5, 2014, 4:40 PM - Re: Uproar - The Helmet Hearing Aid #47

    PM sent.
  23. Member Since
    Feb 2013
    Posts
    29
    Jun 5, 2014, 4:56 PM - Re: Uproar - The Helmet Hearing Aid #48

    According to Deutsche Post, the new board shipment is in the US now, so I should have them by next week hopefully!
  24. Member Since
    Feb 2013
    Posts
    29
    Jun 9, 2014, 4:44 PM - Re: Uproar - The Helmet Hearing Aid #49

    Got the new boards today, but they don't look right. I'm building one tonight to test, so I'll let you guys know if they're gonna work or if I have to contact the fab house for a correction

    Edit! They're all good. Just missing the top soldermask for some reason. But with the conformal coating I use, it reduces that to a cosmetic issue, rather than a function issue. I should have some ready to ship by the weekend
    Last edited by Bernarr; Jun 9, 2014 at 10:39 PM.
  25. Jesuit24's Avatar
    Member Since
    Oct 2013
    Posts
    145
    Jun 25, 2014, 6:12 PM - Re: Uproar - The Helmet Hearing Aid #50

    How's it going?

Similar Threads

  1. Under the Helmet hood
    By Jedi-Bob in forum Boba Fett Helmet
    Replies: 20
    Last Post: Oct 8, 2007, 1:26 AM
  2. Painting the helmet
    By Jedi-Bob in forum Boba Fett Helmet
    Replies: 3
    Last Post: Sep 19, 2004, 10:47 AM
  3. Questions about finishing out the helmet
    By jakob2121 in forum Boba Fett Helmet
    Replies: 5
    Last Post: Sep 11, 2004, 4:36 AM
  4. Masking/Curing Process for Painting the Helmet??
    By batninja in forum Boba Fett Helmet
    Replies: 9
    Last Post: Feb 28, 2003, 11:08 AM
  5. Weathering the Helmet - Scotchbrite pad?
    By batninja in forum Boba Fett Helmet
    Replies: 2
    Last Post: Feb 21, 2003, 9:35 PM