RF blinking circuit board

**Darth-Jay** · 08-25-2009, 12:41 AM

some time ago i needed a small board that fits in my RF. but the common board were to big so i build my own.

its a very small board. Blinking sequenz with 1 second size around
length = 18,0mm width = 9,0mm height = 2,2mm

all is possible using it with a tilt switch and a small battery pack in the RF or over wires.

if there is enought interest in such a board i would make another run of these.

P.S. the price is not set at the moment it depends on the persons interested (i may be interested in trades too) shipping will be from germany.

**TDH Sponsors**

**mmgraphics** · 08-25-2009, 01:47 AM

If you would do a run with full sets (incl. tilt switch and green light for clear RF part) I am interested depending on price.

**Darth-Jay** · 08-25-2009, 10:14 AM

i will see how many people are interested a kit is only possible if there are enough people who want it.

**mmgraphics** · 08-25-2009, 10:17 AM

What would be the price if you get 10 people interested?
I mean, you know the parts needed ...

:-)

**DarkeSword2020** · 08-25-2009, 10:39 AM

Think you could do this for a Jango Styled RF?

Then I'd be interested. (The kit that is)

**Fett Seven** · 08-25-2009, 10:44 AM

Always interest, pending price

**mmgraphics** · 08-25-2009, 10:54 AM

Originally Posted by DarkeSword2020

Think you could do this for a Jango Styled RF?

Then I'd be interested. (The kit that is)

The Jango styled RF would be without the third LED? Just the 2 on top?

**Darth-Jay** · 08-25-2009, 01:51 PM

2 leds on top only are no problem.

i think in a kit i wont include the battery holder but with some shrink tube all is set around some small batterys.

**C1RCA** · 08-25-2009, 04:48 PM

if you could do blue led ill be in

**DeepCFett** · 08-25-2009, 05:57 PM

this would be good for the ROTJ RF right? I'd be in for it if you could wire it all up with sensor and battery

**Darth-Jay** · 10-15-2009, 12:07 AM

still looking for the tilt switch.

so a normal package with board and leds would be the fastes or you can build an movie accurate versio with micro switch.

**Nickpocalypse** · 10-15-2009, 12:46 AM

Interested in just 2 red LEDs with a tilt switch

**L3g3ndQ** · 10-15-2009, 07:17 AM

id be in for one for sure... depending on price

**Darth-Jay** · 11-13-2009, 07:24 AM

so finally found a nice tilt switch an made some battery holders.
so no problem to get the board done.
another question do people want the display light (the white one to light the plexi cover)

what version do people want
boba with/ without backlight (red leds)
boba with/ without backlight (blue leds)
or a custom one with colors and sequences

the board will be small like in the picture and with battery so it should fit in an regular RF with a little work.

**mmgraphics** · 11-13-2009, 07:49 AM

Whats the price bro?

**Darth-Jay** · 11-13-2009, 09:24 AM

i think it will be around 60$+ shipping

**jarice4** · 11-13-2009, 09:38 AM

I'M IN FOR A JANGO. 2 BLUE LIGHTS AND WHITE BACK LIGHT!!!!!

**Anomaly** · 11-13-2009, 11:34 AM

if thats the price for a finished kit, tilt switch, leds, battery holder...
you can consider me interested

**NovallTalon** · 11-13-2009, 11:55 AM

You can definitely put me on the interest list for one with blue LED's and a backlight.

**Darth-Jay** · 11-14-2009, 04:09 AM

i will put together a prototyp of the tilt switch an so on and post picture when its done.

**Darth-Jay** · 11-14-2009, 04:58 AM

here the pics fo the unit and in the RF.
the backlight could be arranged better but you get the effect.

the Jango one will have the blue leds. more backlights could be included but the battery live would be shorter

(and in the kit no battery will be included)
and if somebody would like an other blinking sequenz or other colors for other projects ask.

**C1RCA** · 11-14-2009, 05:05 AM

whats your price on the kits?

**Darth-Jay** · 11-14-2009, 05:10 AM

as stated 60$ + shipping (i live in Germany) or a trade against something usefull for me (all star wars stuff)

**C1RCA** · 11-14-2009, 06:43 PM

plz mark me down for 1 boba with backlight (blue leds) plz

i live in canada so send me a pm with sub total plz

thanks
C

**Naglium** · 11-15-2009, 10:47 PM

Originally Posted by Darth-Jay

as stated 60$ + shipping (i live in Germany) or a trade against something usefull for me (all star wars stuff)

is the RF topper included?

**Darth-Jay** · 11-16-2009, 12:15 AM

included is just the electronic. and some work is needed to get it in the RF.

**Darth-Jay** · 11-19-2009, 12:20 PM

next month the first kits will be ready.

RF blinking circuit board

Thread Tools