Page 1 of 2 12 LastLast

interest sidearm holster combo. ICONIC

  1. #1
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,110

    interest sidearm holster combo. ICONIC

    I am finishing up my sidearm mold and have just finished a holster mold for trooping.

    I am trying to determine the interest.

    Price. Will be between 250 and 300 for both pieces.

    I'll post a picture if my phone will let me.

  2. #2
    mhlayne's Avatar
    Member Since
    Jan 2011
    From
    Wisconsin
    Posts
    546

    Re: interest sidearm holster combo. ICONIC

    PM sent

  3. #3

    Member Since
    Jan 2013
    From
    New Jersey
    Posts
    184

    Re: interest sidearm holster combo. ICONIC

    At the moment I don't have the funds but definitely interested in the future! I'm sure many more will be lined up for a combo

  4. #4
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,110

    Re: interest sidearm holster combo. ICONIC

    img-20140723-wa0014-jpegLeft original. Right pull from mold before adding hardware. No bubbles. Thin seam line. A curate and thin inside and out.

  5. #5
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,110

    Re: interest sidearm holster combo. ICONIC

    img-20140723-wa0017-jpegInside of holster

    - - - Updated - - -

    img-20140723-wa0009-jpegSuper trooper white. To show deta

  6. #6
    bcurtis's Avatar
    Member Since
    Oct 2013
    From
    Silver Spring, MD. USA
    Posts
    329

    Re: interest sidearm holster combo. ICONIC

    PM sent.

  7. #7
    Jc27's Avatar
    Member Since
    Jun 2012
    From
    Pennsylvania
    Posts
    1,661

    Re: interest sidearm holster combo. ICONIC

    Looks nice SR

  8. #8
    dmount's Avatar
    Member Since
    May 2012
    From
    Utah
    Posts
    52

    Re: interest sidearm holster combo. ICONIC

    Definitely interested in a sidearm

  9. #9

    Member Since
    Jun 2012
    From
    Indianapolis, Indiana
    Posts
    170

    Re: interest sidearm holster combo. ICONIC

    Nicely done sir!

  10. #10

    Re: interest sidearm holster combo. ICONIC

    Interested in a sidearm

  11. #11
    Artek's Avatar
    Member Since
    May 2009
    From
    ha why ee
    Posts
    217

    Re: interest sidearm holster combo. ICONIC

    Interested for sure... Hope I can make the run before everyone buys

  12. #12

    Re: interest sidearm holster combo. ICONIC

    Interested!

  13. #13
    v7sg's Avatar
    Member Since
    Aug 2009
    From
    Puerto Rico
    Posts
    70

    Re: interest sidearm holster combo. ICONIC

    Interested, but for the future, I just bought you EE-3 and I need some time to recover

  14. #14

    Re: interest sidearm holster combo. ICONIC

    sidearm sidearm sidearm

  15. #15
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,110

    Re: interest sidearm holster combo. ICONIC

    i will be doing quite a few sidearms and holsters. as many as necessary, and fairly quickly.

    As soon as the mold is complete, I intend to post pics and get timelines in order, should be monday.

  16. #16
    Ghostrider's Avatar
    Member Since
    Aug 2011
    From
    unknown
    Posts
    200

    Re: interest sidearm holster combo. ICONIC

    I'd love to get a holster from you when they are ready

  17. #17

    Member Since
    Jun 2012
    From
    Indianapolis, Indiana
    Posts
    170

    Re: interest sidearm holster combo. ICONIC

    What did you make the holster out of? And the side arm is accurate?

  18. #18
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,110

    Re: interest sidearm holster combo. ICONIC

    Holsters will be in a rigid polyurithane (if you want to sand it down and get rid of the tool marks from removing the knife sheeth) or rubber if you want it to be... rubber.

    The resin I use is closer to the hardness than flex 80 rubber. The original holster is pretty hard. Either are available. The rigid stays in the mold 30 minuts, the rubber 4 hours, so there will be a price difference.

    The bonus is the holster is acurate inside and out. Thin walled and lighter than expected.

  19. #19
    bcurtis's Avatar
    Member Since
    Oct 2013
    From
    Silver Spring, MD. USA
    Posts
    329

    Re: interest sidearm holster combo. ICONIC

    Which is the lighter of the two?

  20. #20
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,110

    Re: interest sidearm holster combo. ICONIC

    The polyurethane is probably lighter. Ill make a video today, it still is flexible, and if dropped or slammed shouldn't break.

    The pulse is a pulse 40. Non split trigger. I have a split trigger version that I can mold / cast but it is a much more difficult mold to make, and the parts don't come out as clean because of the complexity.

    The split is covered by the holster, and the gun never comes out of the holster (That I have seen) so most just need to make sure the top, pommel, and tip are perfect.

    Thoughts anyone?

  21. #21
    formerly buda741 rnbuda's Avatar
    Member Since
    May 2008
    Posts
    59

    Re: interest sidearm holster combo. ICONIC

    As long as the holster is flexible and highly accurate shouldn't be an issue!

    pocturss of the pulse would be awesome too!

  22. #22

    Re: interest sidearm holster combo. ICONIC

    Hey Mike,
    the split can definitely be seen from the back. in fact, with the nemrod holster, the whole trigger guard is exposed so the split would provide the most accurate version of the sidearm.
    boba-fett-costume-empire-strikes-back-08-jpg

    i was going to try making my own split in the trigger guard with the sidearm 2nd i already have from you but would like to see what the option would be for a split version straight out of the mold. OR, could the split trigger guard be molded separately and attached later?

  23. #23
    mhlayne's Avatar
    Member Since
    Jan 2011
    From
    Wisconsin
    Posts
    546

    Re: interest sidearm holster combo. ICONIC

    Great thoughts jdubz, I second that

  24. #24
    formerly buda741 rnbuda's Avatar
    Member Since
    May 2008
    Posts
    59

    Re: interest sidearm holster combo. ICONIC

    Yeah I'll third that. I wouldn't mind the extra prep work for an accurate split trigger.

  25. #25
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,110

    Re: interest sidearm holster combo. ICONIC

    That holster appears. To. Be a cast it looks. Too thick to me. I'll send a picture of the sidearm in a real holster.

    I'll post a quick closeup of the sidearm right out of. The mold.

Similar Threads

  1. Scratch Built ESB sidearm Holster
    By psydaz in forum Boba Fett Costume
    Replies: 9
    Last Post: Dec 24, 2007, 4:25 PM
  2. Sidearm Holster question.
    By TK 4130 in forum Boba Fett Costume
    Replies: 17
    Last Post: Mar 19, 2007, 10:53 PM
  3. MLC ESB Sidearm holster ***Final update 1/24/04****
    By mlcallanta in forum Boba Fett Costume
    Replies: 53
    Last Post: Jan 24, 2004, 12:03 AM
  4. Jodo`s sidearm holster with shells!!!
    By Jodo Kast 3 in forum Boba Fett Costume
    Replies: 15
    Last Post: Jun 8, 2003, 2:10 PM
  5. Nailing the ESB sidearm holster- w/ crappy sketch
    By journeymanprotector in forum Boba Fett Costume
    Replies: 14
    Last Post: Feb 22, 2003, 2:44 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •