Page 2 of 5 FirstFirst 12345 LastLast

ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

  1. #26
    Ghostrider's Avatar
    Member Since
    Aug 2011
    From
    unknown
    Posts
    207

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    I may be interested in a ROTJ blaster as well. Forgot to mention that earlier

  2. #27

    Member Since
    Jan 2013
    From
    New Jersey
    Posts
    189

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    Aw man.... that's a beautiful ESB piece. I wanted one from you so bad but that was during the break period so I went with SW. Anyone want mine so I can buy this beauty? Hahaha

    Sidewinders iis nice too but I like certain features on this

  3. #28

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    Okay I sent an order through...this looks sweet!

  4. #29
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,153

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    Sidewinders gun is awesome also. His new mounts are very nice also. It is what actually made me realize I need to finish my v3's. Once finished, there isn't much difference between the two guns.

  5. #30
    Zon's Avatar
    Member Since
    Dec 2010
    From
    Orlando FL
    Posts
    76

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    Stormrider said: View Post
    I want to get the ROTJ very affordable. Im trying to get it to 200 not 225 or 250. And ill know as soon as I try a new way to pour the barrel.
    At this price I'd need to edit my post to "seriously interested".

  6. #31

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    payment sent!

  7. #32

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    I also need a price for all of the ESB Fett rifle stock greeblies, Visible V-8 parts, barrel clamps and scope mounts.

    I already have a real Webley no. 1 mk. 1 and the square blocks that attach to barrel clamps.

    jscottd@bellsouth.net

  8. #33
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,153

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    I will be pulling all parts Monday/Tuesday for the first gun. At that point, I will take pictures of it all, and some greeble accessory combinations and get ads posted to buy just those.

    Do hyou mean you have the molex connectors already?

  9. #34

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    Stormrider said: View Post
    I will be pulling all parts Monday/Tuesday for the first gun. At that point, I will take pictures of it all, and some greeble accessory combinations and get ads posted to buy just those.

    Do hyou mean you have the molex connectors already?
    Yes, I bought some black ones 10+ years ago. I had forgotten what they were called.

    Thanks for offering these.

  10. #35
    Eagleskull's Avatar
    Member Since
    Aug 2003
    From
    San Diego, Cali
    Posts
    360

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    Payment just sent =D

  11. #36
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,153

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    When plastic comes in (hopefully today maybe tomorrow) I will be pulling parts for pics and starting the production. I expect to start shipping rifles by end of week.

    - - - Updated - - -

    Most the triggers/ hammers /stocks / molex are done. A few barrels. So the 10 or so should go really fast.

  12. #37
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,153

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    Materials are in. I am going to start pulling today. I am also redoing some of the molds. But that doesnt push much out, I can pull some pieces while new molds cure.

    I am going to post a picture of my new mounts based on the current discussions. You will note that there are tabs where the molex connectors go. I decided to put a tab there, and you can either cut them off, or drill a hole in your molex and glue using the tab. And you should never lose your molex connectors again. (This happens a lot).

    Pics in the next hour or so of the new mounts before they hit silicone.

  13. #38
    High Speed Low Drag Fett 4 Real's Avatar
    Member Since
    Jan 2010
    From
    USAF Utah
    Posts
    5,305

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    NICE, gonna have seperate parts FS on your sell buddy for people who need parts like Locitus and I??!?!?!?! Thanks Mike!

  14. #39
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,153

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    Yeah. That's the plan. To have an ongoing run of accessories (trigger hammer guard). Greebles (Stock greebles and V8). Molex. Complete Greeble kit (stock greebles, molex, v8), complete webley.

    The new mounts are in silicone, as well as the scope for the ROTJ.

    I pulled a solid ROTJ rubber last night. I will be posting a pic. Its fairly heavy. But for some reason I get people asking me for a 'heavy feeling realistic weapon'. The problem is it uses a lot of expensive rubber to make it.

    I have enough materials for about 4 - 5 of them. If people are interested in the once I post a pic, I think were talking right around the 225 mark depending on the stocks I get for them. I have to get my pics off my phone and then I will post some.

  15. #40
    Ghostrider's Avatar
    Member Since
    Aug 2011
    From
    unknown
    Posts
    207

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    That sounds great Stormrider. I'm looking forward to seeing some pics of the ROTJ and as far as weight goes light is better I would think, just not too light lol. Mine would end up being a display piece anyway so weight to me right now doesn't matter.

  16. #41
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,153

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    today-jpg

    These parts are straight from the molds, flash broken off by hand, and then laid together. The barrel has had a little exacto cleanup done to it. I have tried to show the part line. This is solid rubber so it is heavy, firm, but unbreakable. It will wobble if you really try to whip it around. The hand piece is hard resin. Pretty sturdy. Again, between the barrel and the stock, it will wobble some in the D bracket (which is molded into the handle grip to make it easier to finish this version).

    Stock is from woodman. These use a LOT of rubber. The only part I don't like is the rubber can be seen in the end of the barrel tip (which is hard resin). it could be drilled out. Again. Fresh from molds.

    The mounts are the new mounts for the kit about to take a silicone bath.

    Comments welcome.

    - - - Updated - - -

    closeup-jpg
    Closeup

  17. #42
    FettFanatic's Avatar
    Member Since
    Aug 2006
    From
    Oklahoma City
    Posts
    749

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    Looks great. I really like the new mounts.

  18. #43

    Member Since
    Jun 2013
    From
    Hawaii
    Posts
    64

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    I like how there were 5 a day ago, and now today, out of stock! Great product!

  19. #44
    Ghostrider's Avatar
    Member Since
    Aug 2011
    From
    unknown
    Posts
    207

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    man that looks fantastic!!

  20. #45
    MrDickJones's Avatar
    Member Since
    Feb 2012
    From
    Ferndale, MI
    Posts
    333

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    That pull of the rotj looks great!
    Would it be possible to just get the webley part? I highlighted the areas that i would need
    needed-parts-jpg

  21. #46
    Jc27's Avatar
    Member Since
    Jun 2012
    From
    Pennsylvania
    Posts
    1,709

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    Argh, sold out. I hope you do another run after the first of the year SR, by then I should have some extra cash( hopefully from the servo kit I'm going to be building).

  22. #47
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,153

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    They are only sold out because I stopped the ad. I suppose I should make it not active.

    I am making a new barrel mold right now. I will be redoing all the molds. Most of them are good, or I have good pulls in my boxes. But I don't want to be rushed to ship something that I wouldn't be thrilled to receive. I have about 14 un-reserved stocks.

    The ROTJ webley kit that's just the webley is only two pieces. A barrel and the handgrip/dbracket together. I can make one of those. They are hard resin though. Do you need the trigger/hammer/guard also? And do you want the greebles on the barrel or do you want to put them on yourself?

  23. #48

    ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    That rotj looks amazing!
    Take my money already!!
    Quote Quote Posted from iOS app

  24. #49
    MrDickJones's Avatar
    Member Since
    Feb 2012
    From
    Ferndale, MI
    Posts
    333

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    The ROTJ webley kit that's just the webley is only two pieces. A barrel and the handgrip/dbracket together. I can make one of those. They are hard resin though. Do you need the trigger/hammer/guard also? And do you want the greebles on the barrel or do you want to put them on yourself?
    The webley kit, with the trigger/hammer/guard, and greebles would be perfect. (whatever way would be easier for you with the greebles, attached or not, makes no difference to me )
    I'm in no rush for this, when you have time, just let me know when you can...thanks

  25. #50
    Stormrider's Avatar
    Member Since
    Aug 2007
    From
    Kalamazoo, MI
    Posts
    2,153

    Re: ICONIC Stormrider EE3 - ESB Version Limited Run / ROTJ interest

    If I get enough to do 5, Illl open up an order form. Im also waiting for the scope to come out of silicone.

Similar Threads

  1. FS: Stormrider / ICONIC HIC Casts (LIMITED)
    By Stormrider in forum The Cargo Hold
    Replies: 86
    Last Post: May 1, 2014, 2:47 PM
  2. FS: ROTJ - EE3 / ESB EE3 - ESB SIDEARM ICONIC PROPS - Stormrider
    By Stormrider in forum The Cargo Hold
    Replies: 73
    Last Post: Apr 20, 2014, 11:32 PM
  3. FS: Stormrider ICONIC Sidearms - 1 Piece Trooping Version
    By Stormrider in forum The Cargo Hold
    Replies: 89
    Last Post: Dec 27, 2013, 3:13 PM
  4. ICONIC Rubber EE3 (ROTJ) - Stormrider
    By Stormrider in forum Boba Fett Costume
    Replies: 14
    Last Post: Nov 14, 2013, 12:41 AM
  5. Replies: 68
    Last Post: Nov 6, 2013, 6:39 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •