Page 1 of 4 1234 LastLast

3D Printed Boba Fett-Toe Spikes/Collar Studs/Dental Files/Shin Tools/ESB EE-3 Piece

  1. #1
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    3D Printed Boba Fett-Toe Spikes/Collar Studs/Dental Files/Shin Tools/ESB EE-3 Piece

    I have designed up a few pieces to have 3D printed & am offering them for sale to anyone interested.

    -Pair of Boba Fett toe plate & spikes fits MOW 2013 boots. Fits both left & right boots. If you have a different style of boot contact me & I may be able to model up similar toe plate & spikes for your specific boot. Photos of them finished & weathered on my boots.

    http://www.thedentedhelmet.com/f20/r...39/#post623446

    Price starting at $30.43 + shipping

    -Boba Fett collar & cod piece attachment blocks set of 6

    Price starting at $23.00 + shipping

    -Dental expander modeled after Glenross

    Price starting at $7.07 + shipping

    -Pair of ESB EE-3 blaster center stock greeble

    Price starting at $43.72 + shipping

    -3 Hole Borden connector, photo shows actual Borden connector for comparison purposes.

    Price starting at $4.80 + shipping

    -Shin Tools the Sonic Beam, Anti-Security, Survival Knife & Jetpack Adjustment Tool. Pieces are design hollow so will be light weight. Both ESB & ROTJ.

    Price starting at $80.00 + shipping

    -Pair of dental files similar to Hedstroem used on Boba Fett ROTJ helmet, ESB jetpack & right gauntlet. Dimensions are .185" (4.7mm) by .385" (9.8 mm)
    *****REVISED-NOW WITH THE # 15 ON THE TOP*****

    Price starting at $6.45 + shipping

    -Jetpack "Piano Keys" set of 24, 22 small & 2 large

    Price $14.00 + shipping

    -Jetpack Stabilizer, modeled after found Mitchell turntable sweep piece

    Price starting at $7.25 + shipping

    -Pair of pieces for Anti-Security Blade modeled from reference photos of both the Anti-Security blade & the MItchell stylus brush. These pieces are hollow. These pieces are hollow & can be purchase in 10 mm or .375" diameters.

    Price starting at $14.00 + shipping

    -ESB & ROTJ style jetpack beacon with mount to install LED.

    Price starting at $22.01 + shipping

    -Alternative style jetpack beacon with mount to install LED.

    Price starting at $22.06 + shipping

    -Tall feet scope rings.

    Price starting at $14.42 + shipping

    -Gauntlet Rocket designed to be completely hollow for light weight & done in 3 pieces. Designed to be printed in metals.

    Price starting at $45.00 + shipping

    -Casio MQ-1 keypad. Designed from actual Casio MQ-1. (Working on a design so that the buttons will be functional)

    Price starting at $12.80 + shipping

    All items are able to be 3D printed rough or polished & in certain materials of your choice at varying costs. I selected various materials that I thought would be best for the application. Recommend going with the polished finish due to it removing the print lines if not some finish sanding will be required on the pieces. Recommend the polished alumide for an affordable metallic looking version but some items aren't able to be printed in that material.

    These can all be ordered here:

    CSB Props by toolguy301 on Shapeways
    Attached Thumbnails Attached Thumbnails boot_plate_toe_spikes-jpg   shoulder_attachment-01-jpg   2014-02-18-18-58-16-1-jpg  

    esb_ee-3_stock_center_greeble-1-jpg   dscf5040-1-jpg   dscf5021-1-jpg  

    borden_connector-1-jpg   shin-tools-version-esb-rotj_label-jpg   dental_file_revision_1-jpg  

    dscf5035-1-jpg   674x501_1788513_2370463_1395001877-jpg   674x501_1789330_2491423_1396666538-jpg  

    mitchell_stylus_brush-2-jpg   jetpack_beacon_rotj_esb_assembly_1-jpg   jetpack_beacon_alternative_assembly_1-jpg  

    scope_hero_rings_pair-1-jpg   rocket_all-jpg   625x465_2395492_4193186_1407636385-jpg  

    Last edited by toolguy301; 11 Hours Ago at 4:10 PM.

  2. #2
    MrDickJones's Avatar
    Member Since
    Feb 2012
    From
    Ferndale, MI
    Posts
    333

    Re: 3D Printed Boba Fett & Boushh items

    Those toe spikes look great!

  3. #3
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed Boba Fett & Boushh items

    Thanks MrDJ.

    Updated the shoulder attachment photo. Got the ones I ordered today.

  4. #4
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed Boba Fett & Boushh items

    All updated with actually photos.

  5. #5
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed Boba Fett (Toe Spikes & Collar Studs) & Boushh (Buckle) items

    Weekend bump.

  6. #6
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed Boba Fett (Toe Spikes & Collar Studs) & Boushh (Buckle & Boot Disks) i

    Updated first post with added pieces now available.
    Last edited by toolguy301; Jan 31, 2014 at 11:11 PM.

  7. #7
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed Boba Fett (Toe Spikes & Collar Studs) & Boushh (Buckle & Boot Disks) i

    Added ESB EE-3 stock center greeble.

  8. #8
    Jc27's Avatar
    Member Since
    Jun 2012
    From
    Pennsylvania
    Posts
    1,706

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    Do the collar and cod blocks come with the nut? What size hardware is needed for them?

  9. #9
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    No hardware comes with them. They come direct from Shapeways. The recess is for a standard 8-32 hex nut that is .120" thick, they can be purchased at your local hardware/supply store (Home Depot/Lowes/Menards) in a small pack with the screws for around $5.00 (taking a guess cause I can't remember what I paid). Then just epoxy the nuts into the blocks. Hope this answers your questions.

  10. #10
    Jc27's Avatar
    Member Since
    Jun 2012
    From
    Pennsylvania
    Posts
    1,706

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    Yep it does. Are they in stock?

  11. #11
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    The way I have things set up right now I don't have any inventory so the parts are made when the order is place & lead time is about 2 weeks. Order is done & handled through Shapeways at this time. Trying to figure things out at this time, but I may change some things in the future & offer some different options,

  12. #12
    Jc27's Avatar
    Member Since
    Jun 2012
    From
    Pennsylvania
    Posts
    1,706

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    Ok. When I get my armor from Dom I will order some.

  13. #13
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    Thank you I appreciate the your interest in these.

  14. #14
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    Bump for the week.

  15. #15
    Jc27's Avatar
    Member Since
    Jun 2012
    From
    Pennsylvania
    Posts
    1,706

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    I just checked out your stuff, it all looks great. Are you planning on doing the jp harness?

  16. #16
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    Thanks & yes, I have a jp harness on order and I want to see if I am happy with it before I offer it. I want to make sure I don't have to make any changes to improve the structure. I engineered it to what I thought would be sturdy & light weight. It is based it off reference photos & other information but made with some modifications to allow for it to be 3D printed & for assembly.

  17. #17
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    Updated first post with actual photo of 3D printed dental expander.

  18. #18
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    Updated first post adding jetpack adjustment tool & photos of Borden connector.

  19. #19
    DeathProof's Avatar
    Member Since
    Jun 2013
    From
    Victoria, British Columbia
    Posts
    651

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    Hey man! Great work. Just curious if you can make the dental files for the ROTJ bucket? Can't seem to find them.

  20. #20
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    DP, that is actually something I have in the works & need to finish the model. I will try & finish this up. I know that they are difficult to find. I made mine with a volume knob spline & some epoxy putty.

  21. #21
    DeathProof's Avatar
    Member Since
    Jun 2013
    From
    Victoria, British Columbia
    Posts
    651

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    Right on! Looking forward to it !

  22. #22
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/EE-3 piece & Boushh-Buckle/Boot Disks

    Added dental files to first post.

  23. #23
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/Dental Files & Boushh-Buckle/Boot Disks

    Weekend bump

  24. #24
    toolguy301's Avatar
    Member Since
    May 2009
    From
    Rockford, IL
    Posts
    413

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/Dental Files & Boushh-Buckle/Boot Disks

    Weekend bump.

  25. #25
    DeathProof's Avatar
    Member Since
    Jun 2013
    From
    Victoria, British Columbia
    Posts
    651

    Re: 3D Printed-Boba Fett-Spikes/Collar Studs/Dental Files & Boushh-Buckle/Boot Disks

    Got the dental files in the mail - tip top quality! If you're looking for a great alternative to the rare dental files for the ROTJ lid, this is perfect!

Similar Threads

  1. FS: 3D Printed Boba Fett Jetpack harness
    By toolguy301 in forum The Cargo Hold
    Replies: 56
    Last Post: 1 Day Ago, 7:59 AM
  2. FS: Jango Wes Boots Size 11 w/ Mojo Fett Toe Spikes $250
    By mandalord3190 in forum The Cargo Hold
    Replies: 19
    Last Post: Aug 21, 2013, 2:27 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •