remo032
Jr Hunter
Update 11/21/2018 This long running project is almost done I have been working with Dave at Dark Energy Creations on getting these done. We are finally there. Just making the final tweaks to the handle mold and there are some changes to what we had originally intended to do. The aluminum handles just weren't turning out right and the molded pewter was to heavy so like the MR's the handle will be resin. But we have added electronics trigger activated LED lights in the flash suppressor, and an adjustable power regulator knob. The price has dropped from the original quote and is now $220.00 USD per blaster plus shipping. They are available for order directly from Dark Energy Creations at AOTC-JF Blaster Kit
Currently I am working on a price quote from Dark Energy Creations aka. dmachinist on the RPF to make a run of high quality full metal Westar-34's using WOF blueprints and the detailed pictures that are on RebelScum.com. But I need to get enough people on board before I can make this happen. Right now I'm Just gauging interest to see if it's doable. In order to make the price reasonable (below $650 per set) I need to get at least 25 sets made. The more that I have made the cheaper the price per set will be. So please just post a reply if your interested. They are currently finishing up a run of DL-44's so it will probably be another week or two before I get the final price quotes. I will keep updating this post as I get more information and price quotes.
Update:
In an attempt to keep the price down they will come in a kit form they will be very well machined aluminum, however to get that chrome look that the MR's have they will require some fine sanding and polishing. Which I can do for you if so desired but it will cost a little bit more. I'll have to see how much work it will be to finish them before I can quote my price for the finishing work.
Update:
I just received the price quote $600 for a pair $350 if you just want one. but for this price I / we will need to get 50 pairs manufactured.
All parts would be individually machined, parts will be made from top quality solid billet aluminum, with a raw machined finish, fitting/finishing/assembly required.
The down side is that he can't do them until he upgrades some of his machinery (mostly just for doing the handle and counterbalance). which means production wouldn't start till Fall.
The other possible killer would be licensing issues which he is checking on to see if there is a way around them. (he has to protect his business).
Update:
Well it looks like this is progressing forwards. He is going to make a sample set of parts some time within the next couple of months so that he / we have pictures to post that will show the kit and hopefully how it will all fit together. I will post pics as soon as he sends them to me. Thanks for everybody's interest so far.
Update: The parts making process has started it should be another month or two before they are done he is going to send me pics as he completes the parts.
Update: the production has started here is a pic of some of the unfinished parts they still need to cut the grooves in the power knob and power regulator.
View attachment 64058
Update: I am expecting more pics in January, and expecting kits to be ready some time in February.
Update: His new CNC machine is now in place and up and running. He is doing a run of DL44 kits (proven money maker for him, has to pay for the machine) and then starting up on the Westar-34's I'll post pics as I get them. But this is his new machine.
Update: 7/17/2017 Production is underway again the first power knob has been completed. He is working on making the power knob functional, The brass button that will go in the middle hole will function as a release that will allow the knob to turn until released.
Update: 7/20/2017 More progress this is the power knob with the brass release button allowing it to rotate.
Update: 8/4/2017 More progress Just finished the Plasma Chamber the attached video shows him using the CNC machine to cut the angles plus the fixture he made to hold this piece. The first attempt at cutting these angles failed which is why the holding attachment needed to be made.
https://youtu.be/opDg168zZj0
Update: 9/12/2017 More progress to report. Still working on the handle dimensions, but this is what he has so far. He is working the dimensions on a 3D printer before attempting on the CNC machine. They still need a couple of minor tweaks.
Update: 9/16/2017 More progress to report. Still have to make the adjustments to the handle and drill the holes in the flash suppressor. Thanks to DarthBrooks I have a set of MR's on the way so I will be able to take more exact measurements for the handle and the flash suppressor holes. The following pics show where we / Dark Energy Creations sit on this project.
![IMG_1663[2].jpg](https://www.thedentedhelmet.com/forums/attachments/img_1663-2-jpg.155510/ "IMG_1663[2].jpg")
![IMG_1662[2].jpg](https://www.thedentedhelmet.com/forums/attachments/img_1662-2-jpg.155511/ "IMG_1662[2].jpg")
Update: 10/29/2017 Holes for flash suppressor have been drilled and look spot on. The handles are being redone since the first one didn't even come close to the MR's and looked to big. The flash suppressor is being tested to receive an LED that will light up with a trigger pull.
Currently I am working on a price quote from Dark Energy Creations aka. dmachinist on the RPF to make a run of high quality full metal Westar-34's using WOF blueprints and the detailed pictures that are on RebelScum.com. But I need to get enough people on board before I can make this happen. Right now I'm Just gauging interest to see if it's doable. In order to make the price reasonable (below $650 per set) I need to get at least 25 sets made. The more that I have made the cheaper the price per set will be. So please just post a reply if your interested. They are currently finishing up a run of DL-44's so it will probably be another week or two before I get the final price quotes. I will keep updating this post as I get more information and price quotes.
Update:
In an attempt to keep the price down they will come in a kit form they will be very well machined aluminum, however to get that chrome look that the MR's have they will require some fine sanding and polishing. Which I can do for you if so desired but it will cost a little bit more. I'll have to see how much work it will be to finish them before I can quote my price for the finishing work.
Update:
I just received the price quote $600 for a pair $350 if you just want one. but for this price I / we will need to get 50 pairs manufactured.
All parts would be individually machined, parts will be made from top quality solid billet aluminum, with a raw machined finish, fitting/finishing/assembly required.
The down side is that he can't do them until he upgrades some of his machinery (mostly just for doing the handle and counterbalance). which means production wouldn't start till Fall.
The other possible killer would be licensing issues which he is checking on to see if there is a way around them. (he has to protect his business).
Update:
Well it looks like this is progressing forwards. He is going to make a sample set of parts some time within the next couple of months so that he / we have pictures to post that will show the kit and hopefully how it will all fit together. I will post pics as soon as he sends them to me. Thanks for everybody's interest so far.
Update: The parts making process has started it should be another month or two before they are done he is going to send me pics as he completes the parts.
Update: the production has started here is a pic of some of the unfinished parts they still need to cut the grooves in the power knob and power regulator.
View attachment 64058
Update: I am expecting more pics in January, and expecting kits to be ready some time in February.
Update: His new CNC machine is now in place and up and running. He is doing a run of DL44 kits (proven money maker for him, has to pay for the machine) and then starting up on the Westar-34's I'll post pics as I get them. But this is his new machine.
Update: 7/17/2017 Production is underway again the first power knob has been completed. He is working on making the power knob functional, The brass button that will go in the middle hole will function as a release that will allow the knob to turn until released.
Update: 7/20/2017 More progress this is the power knob with the brass release button allowing it to rotate.
Update: 8/4/2017 More progress Just finished the Plasma Chamber the attached video shows him using the CNC machine to cut the angles plus the fixture he made to hold this piece. The first attempt at cutting these angles failed which is why the holding attachment needed to be made.
https://youtu.be/opDg168zZj0
Update: 9/12/2017 More progress to report. Still working on the handle dimensions, but this is what he has so far. He is working the dimensions on a 3D printer before attempting on the CNC machine. They still need a couple of minor tweaks.
Update: 9/16/2017 More progress to report. Still have to make the adjustments to the handle and drill the holes in the flash suppressor. Thanks to DarthBrooks I have a set of MR's on the way so I will be able to take more exact measurements for the handle and the flash suppressor holes. The following pics show where we / Dark Energy Creations sit on this project.
Update: 10/29/2017 Holes for flash suppressor have been drilled and look spot on. The handles are being redone since the first one didn't even come close to the MR's and looked to big. The flash suppressor is being tested to receive an LED that will light up with a trigger pull.
Last edited:
