A swedes westars scratch build

Anton the swede

New Hunter
Hi guys (IT has been a long time sence I posted here)
Well I have always wanted a pair of jango Westars 34 so watha heck I give it a shot

First I printed out WOF template(I love them) I traced the patters out on a thinker papper

mhzwa1.jpg


I had a big piece of MDF 20mm laying around the apartment and put up my workstation on my balcony and started to work. just one of the handels took me about 1 hour to cut out and sanded it.
2wn8cja.jpg


I hot glued the barrel on the handel so I had it right.

2rzq3he.jpg


the back pieces I will have to make next week on a lathe.

so what do you tink?
 
small update(pic I will add later tonight)

Not smart to let the camera lay on the working area! becuse the dust from the plexi(I use it for the trigger) sticks qite bad to it and gets in the loading port
 
here is the only good pic due to grinding dust on the camera lens
2p0r8.jpg


as of right now
both blasters have had their triggers added and sanded some more and the ohter one is getting a basecoat sealer first then is will be sprayed whit metallic silver and after that I will start on the holsters

/Anton
 
This thread is more than 13 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top