Page 3 of 9 FirstFirst 12345678 ... LastLast
Subscribe
  1. Kylash327
    Guest
    Sep 25, 2002, 6:30 PM - Re: Official Thread - Gauntlets #51

    Yeah, there's a tube, I haven't really figured out how I'm gonna do that yet either Seeker: The parts you used for the hose connectors and the assembly going acros the bottom to the dart.
  2. darthdav's Avatar
    Member Since
    Apr 2002
    Posts
    210
    Sep 25, 2002, 9:30 PM - Re: Official Thread - Gauntlets #52

    yes i see that tube for that second hose- is that the "real" way? what does the other end of the tube (the end that does NOT have the hose attached to it) look like?
    I didnt get a good shot of it at the SWCII. Any info would be apreciated!
  3. SEEKER's Avatar
    Member Since
    Feb 2002
    Posts
    4,371
    Sep 25, 2002, 9:50 PM - Re: Official Thread - Gauntlets #53

    my guantlet is not accurate to the real thing but here's a picture of one that it is. the parts you could get them here www.mcmaster.com and look for this part number 50915k101 then select catalog page. But they are called compression tube fittings

    <image src=http://www.r2ro.com/images/rightg.jpg>
  4. Kylash327
    Guest
    Sep 25, 2002, 9:59 PM - Re: Official Thread - Gauntlets #54

    Which size did you use? There are like 8 different ones.
  5. SEEKER's Avatar
    Member Since
    Feb 2002
    Posts
    4,371
    Sep 25, 2002, 10:40 PM - Re: Official Thread - Gauntlets #55

    1/8
  6. Member Since
    Sep 2002
    Posts
    671
    Sep 25, 2002, 11:29 PM - Re: Official Thread - Gauntlets #56

    Thanks a lot gwizah fett,
    we've been looking for that piece for a while and have been unsuccessful in locating it Nice find

  7. malcfett's Avatar
    Member Since
    Sep 2002
    Posts
    366
    Sep 27, 2002, 12:32 AM - Re: Official Thread - Gauntlets #57

    Does anyone know what to use to make the flame thrower nozzels?
    I would guess that they would be some sort of fuel line tapered connectors
    or perhaps some sort of plumbing hardare. Maybe even the end of a butane
    torch?

    Please help since I'm at a loss here and would like to try and find the parts
    to finish my gauntlets maybe even this weekend.

    Thanks!
  8. Kylash327
    Guest
    Sep 27, 2002, 1:06 AM - Re: Official Thread - Gauntlets #58

    Do you eman the nozzels at the end where the flames come out? These look close:

    <img src=http://www.mcmaster.com/catalog/108/gfx/large/50915kp10l.gif>

    It's on the page Seeker just pointed out above.
  9. malcfett's Avatar
    Member Since
    Sep 2002
    Posts
    366
    Sep 27, 2002, 2:24 PM - Re: Official Thread - Gauntlets #59

    That's them!

    Thanks!

  10. Kylash327
    Guest
    Oct 1, 2002, 11:31 AM - Merged: Black Gauntlet Hose? #60

    I'm sure this has been covered before somewhere but I'm too lazy to look around for it. I know a few people have had problems finding the right kind of tubing in black color and I'm finally to this point in my suit. For those of you who've got this far or finished, where did you get your tubing, what kind is it, how much, ect.
  11. bigkidbiggertoys's Avatar
    Member Since
    Mar 2002
    Posts
    1,269
    Oct 1, 2002, 11:35 AM - Merged: Re: Black Gauntlet Hose? #61

    I bought some fuel line hose off the roll at an auto parts store. I don't remember the price but it wasn't that expensive. Depending on how you attach your hoses to your jumpsuit, you will about 7 1/2 feet. 1 1/2 feet per hose should be adequate.
  12. gwizah_fett
    Guest
    Oct 1, 2002, 12:02 PM - Merged: Re: Black Gauntlet Hose? #62

    Hey guys I just wanted to point out that the tubing displayed at celebration II was actually a braided translucent blue tube. I have done a few searches and have not been able to find a manufacturer of colored braided tubing. ANyone had any luck with this?
  13. malcfett's Avatar
    Member Since
    Sep 2002
    Posts
    366
    Oct 1, 2002, 12:06 PM - Merged: Re: Black Gauntlet Hose? #63

    I used stainless steel braided hose...the kind
    used on washing machines...and colored them black using
    a permanent magic marker. It looks pretty good,
    and they have the couplings already attached that you can
    screw onto various brass fittings (which made
    attaching to the gauntlets much easier!). I bought
    them in the plumbing section of my local home depot.
    Not exactly movie accurate...but pretty close.
  14. FettsBounty
    Guest
    Oct 1, 2002, 2:00 PM - Merged: Re: Black Gauntlet Hose? #64

    You could always buy some clear hose and dye it blue (which is probably what LFL did). I had to dye some hose yellow for my Ghostbsuters uniform and all I did was run some brown leather dye through it and washed all the excess out. Worked really well:



    You can see the hose on my left leg in that pic. So if they make a dark Blue leather dye, which I'm assuming they do, you might try that meathod out and see how it works.

    -Austin
    BH-1116
  15. Kylash327
    Guest
    Oct 1, 2002, 2:10 PM - Merged: Re: Black Gauntlet Hose? #65

    All you did was run it through once and it stuck to the inside?
  16. FettsBounty
    Guest
    Oct 1, 2002, 4:12 PM - Merged: Re: Black Gauntlet Hose? #66

    Kylash327 wrote:All you did was run it through once and it stuck to the inside?
    I had to run it through several times, but it started to dye the hose almost instantly.

    -Austin
    BH-1116
  17. SEEKER's Avatar
    Member Since
    Feb 2002
    Posts
    4,371
    Oct 3, 2002, 12:26 AM - Merged: Re: Right Gauntlet Darts found? #67

    here's a pic of puncher I'm using when I get my new gauntlets

    go to www.leatherfactory.com and do a search for "punch"

    Again this the one for the front part of jangos right guantlet.

    kinda of close but it would do for now

    <image src=http://www.leatherfactory.com/graphics/lace_punches_&_chisels/g48-7.jpg>

    <image src=http://www.r2ro.com/images/dartsfront.jpg>
  18. sith_camaro's Avatar
    Member Since
    Mar 2002
    Posts
    737
    Oct 3, 2002, 8:33 AM - Merged: Re: Right Gauntlet Darts found? #68

    Tandy 4-in-1 punch tube, part# 3053-00?
  19. SEEKER's Avatar
    Member Since
    Feb 2002
    Posts
    4,371
    Oct 3, 2002, 9:13 AM - Merged: Re: Right Gauntlet Darts found? #69

    this is when the dremmel comes in handy. sharpen that baby up...
  20. FettsBounty
    Guest
    Oct 3, 2002, 4:18 PM - Merged: Re: Right Gauntlet Darts found? #70

    Here ya' go!



    A bargin at $24.99 each!

    OR



    Only a $1.39 each!

    OR



    $1.29 each!

    -Austin
    BH-1116
  21. malcfett's Avatar
    Member Since
    Sep 2002
    Posts
    366
    Oct 8, 2002, 1:15 AM - Merged: Gauntlet hoses...how far do they go??? #71

    Just finishing up on my gauntlets and I'm debating on where
    to cut them off at...the middle of the upper arm...the shoulder...
    or further up and into the jumpsuit body itself???

    What is everyone else doing with theirs? I'd appreciate some
    advice.

  22. whojedi's Avatar
    Member Since
    Jun 2002
    Posts
    212
    Oct 8, 2002, 1:21 AM - Merged: Re: Gauntlet hoses...how far do they go??? #72

    They go in under the outer sleeve of the jumpsuit. I am attaching the ends of the hoses together and they will have a backpack type snap system to attach it to the flightsuit underneath the outer sleeve.
  23. Bobbywan's Avatar
    Member Since
    Sep 2002
    Posts
    554
    Oct 8, 2002, 3:56 AM - Re: Official Thread - Gauntlets #73

    Im having a hard time finding that part. Can someone point me in the right direction and also give me the official name of the part??

    Thanks!!



    ~Bobby
  24. Kylash327
    Guest
    Oct 8, 2002, 10:01 AM - Merged: Re: Gauntlet hoses...how far do they go??? #74

    I'm just finishing up my hoses tonight actually and that's the same method I'm doing, the backpack clips. Just using lots of tape and Goop to hold them together.
  25. Member Since
    Sep 2002
    Posts
    77
    Oct 8, 2002, 11:05 AM - Merged: Gold spigot piece for left gauntlet #75

    Where in the heck do you find this thing

Similar Threads

  1. UN-OFFICIAL OFFICIAL SR V2 Helmet Liner / Padding PIC Thread
    By Stormrider in forum Boba Fett Helmet
    Replies: 0
    Last Post: Nov 14, 2008, 1:40 PM
  2. Official Sintra thread
    By Migrate from As You Wish in forum Prop Building Workshop
    Replies: 232
    Last Post: Jun 13, 2005, 2:46 AM
  3. *Official show off your gauntlets thread
    By JangoBear in forum Jango Fett Costume
    Replies: 6
    Last Post: May 4, 2005, 10:17 PM
  4. *Official* Zam custom art thread
    By Dustin Crops Boy in forum Zam Wesell Costume
    Replies: 17
    Last Post: Dec 5, 2004, 10:12 PM
  5. Attaching the hoses to the gauntlets
    By asok in forum Boba Fett Costume
    Replies: 9
    Last Post: Jul 28, 2003, 7:31 PM