Subscribe
  1. Member Since
    Aug 2003
    Posts
    197
    Mar 13, 2010, 10:16 PM - Need advice on supplier #1

    ive been out of the loop for so long its good to back amoung the Fettsters.

    As you guessed thinking of putting together a Jango Fett costume, but because im kind of in and out the whole costuming scene and not really sure wether i want to commit 100% ive been looking into 2 options.

    1/ the more accuarte expensive build up with Bobamakers stuff

    2/ or the cheaper option sourcing parts here there and everywhere

    i came across a company on errrrrr can i mention it here ?? that auction site called EVOLUTIONTOYSHOP based in of all places Argentina.

    any heads up on these people would be appreciated
  2. Mar 14, 2010, 11:02 AM - Re: Need advice on supplier #2

    Of course you can mention Evolution toy shop, he goes by britt59 on the boards.

    Bobamaker doesn't make all Jango Fett parts. Cruzer makes most the parts. Dark-Side makes the knees.

    Cruzer makes gun holsters, Seeker makes the ammo belt.

    Fettpride and Bobamaker (BM) makes parts but not as much as Cruzer.

    Their are other great makers such as MOW (Man of War), Bobby Fett UK who can also make some parts.

    Am sure if you look in 'The Cargo Hold' you may see some items going cheaper for sale.

    If you wanted too, depending on you hand skills. Look at Alan's WOF Templates for Jango Fett parts and make them from scratch.

    All up to you. Welcome to TDH! Best of Luck whatever your choice!
  3. Member Since
    Aug 2003
    Posts
    197
    Mar 14, 2010, 12:22 PM - Re: Need advice on supplier #3

    Quote Mandalorian Guard said: View Post
    Of course you can mention Evolution toy shop, he goes by britt59 on the boards.

    Bobamaker doesn't make all Jango Fett parts. Cruzer makes most the parts. Dark-Side makes the knees.

    Cruzer makes gun holsters, Seeker makes the ammo belt.

    Fettpride and Bobamaker (BM) makes parts but not as much as Cruzer.

    Their are other great makers such as MOW (Man of War), Bobby Fett UK who can also make some parts.

    Am sure if you look in 'The Cargo Hold' you may see some items going cheaper for sale.

    If you wanted too, depending on you hand skills. Look at Alan's WOF Templates for Jango Fett parts and make them from scratch.

    All up to you. Welcome to TDH! Best of Luck whatever your choice!
    so i take it then that evolution is a reputable seller and the quality is good
  4. saint_nasty's Avatar
    Member Since
    Nov 2006
    Posts
    2,874
    Mar 14, 2010, 2:06 PM - Re: Need advice on supplier #4

    gabe's stuff is kind of hit and miss. some of his stuff is remarkably good, and by some of i mean his boba gear, it's been what he's been working on the longest. he recently got into more jango equipment and it's all right. he posts products from time to time, and we give him feedback, and he takes it back to the drawing board to tweak it some more, and this goes on a few times before we all seem to reach a happy balance between accuracy and price. is it the best stuff? not really. but it's not total garbage either, not like some of the things you can find on ebay. if you're a stickler for accuracy you'll want to go with the makers listed in mandalorian guards post, if not you'll still want to give evolution probably another year to get some more of the bugs worked out of their jango line.
  5. Gee2's Avatar
    Member Since
    Jan 2008
    Posts
    135
    Mar 14, 2010, 3:25 PM - Re: Need advice on supplier #5

    Regardless of what supplier you go with, putting together a Jango kit that you can be proud of is an expensive and time consuming venture. MG pointed you in the right direction with some good suppliers and great folks that are fans just like us so they have a lot of pride that goes into their work. Remember that as you go along, ask questions even if it seems silly and put it together slowly and methodically, otherwise you will spend good money after bad.
  6. Member Since
    Aug 2003
    Posts
    197
    Mar 14, 2010, 7:24 PM - Re: Need advice on supplier #6

    well i know Daz (bobamaker) from way back and did always plan to get one of his cold cast Jango helmets anyway.

    ive been out the loop for so long just wanted to get some ideas,

    thanks guys as usual the Dented Helmet comes in tops
  7. aprilstorm's Avatar
    Member Since
    Mar 2010
    Posts
    75
    Mar 29, 2010, 10:27 PM - Re: Need advice on supplier #7

    Hi guys,

    While my situation isnt the same, I am familiar with some makers in australia for non fett/mando stuff, I was looking for advice on where I could get a basic helmet kit to start working on my mando costume.

    I am a 501st & RL member and know that getting the best stuff is normally a question of asking people on forums like these. So I hear Bobamaker mentioned a fair bit, and since my costume is custom, i thought starting off with a Jango helmet might be the way to go.

    So how does one get in contact with Bobamaker? does he have a site? What are the options?

    thanks in advance.

    April
  8. Drexx Korso's Avatar
    Member Since
    Oct 2009
    Posts
    202
    Mar 29, 2010, 10:35 PM - Re: Need advice on supplier #8

    Here is Bobamakers website http://www.bobamaker.co.uk/index.html
  9. Chucko's Avatar
    Member Since
    Sep 2008
    Posts
    482
    Apr 4, 2010, 6:02 PM - Re: Need advice on supplier #9

    Contact Delta Squad Boss on the Mandalorian Mercs board. He sells Awesome helmets for $125 +shipping
  10. concord is offline concord
    Jul 7, 2011, 7:39 PM - Re: Need advice on supplier #10

    bobamaker is about the best out there although as has been said he dont make all the parts,i got the flightsuit,chest shoulder and collar armour as well as a cold cast helmet from him and it is fantastic.i have no problem recomending him to anyone
  11. saint_nasty's Avatar
    Member Since
    Nov 2006
    Posts
    2,874
    Jul 7, 2011, 8:55 PM - Re: Need advice on supplier #11

    threads over a year old. though that is a glowing review for bobamaker
  12. concord is offline concord
    Jul 7, 2011, 9:02 PM - Re: Need advice on supplier #12

    well, you do get what you pay for
  13. darth z's Avatar
    Member Since
    Oct 2009
    Posts
    350
    Jul 7, 2011, 9:17 PM - Re: Need advice on supplier #13

    my amor is a BM+Curzer+Darkside mix, all very satisfactory stuff
  14. concord is offline concord
    Jul 7, 2011, 9:21 PM - Re: Need advice on supplier #14

    yep,ibelive cruzer gear is quite excllent too

Similar Threads

  1. ABS supplier?
    By CombatBaby in forum Prop Building Workshop
    Replies: 5
    Last Post: Sep 2, 2010, 1:48 AM
  2. jetpack vent supplier?
    By yodakiller1138 in forum Boba Fett Costume
    Replies: 2
    Last Post: Mar 22, 2010, 12:52 PM
  3. Horsehair braids and supplier question
    By BH2372 in forum Boba Fett Costume
    Replies: 10
    Last Post: Apr 8, 2009, 2:15 PM
  4. Question about TK armour supplier. . .
    By Murphoid in forum Star Wars Costumes
    Replies: 10
    Last Post: Jan 20, 2008, 7:47 PM
  5. ABS supplier?
    By stormtrooper@rushmore in forum Prop Building Workshop
    Replies: 3
    Last Post: Apr 29, 2005, 8:09 AM