Does anybody have high resolution pics on the Jango blasters? After the handles in particular for the colour against the barrels. Any help please! Thanks!
On this site, Kropserkel you'll find some cool pics, and on Rebelscum they have an impressive photo archive of blasters. Between those two sites, you'll find all of the pictures that you'll ever need!
Got me DS knees the other day. Having a bit of trouble figuring out how to attach my darts on from Mojo-Fett to DS knees. Anybody who done DS knees got any help?
The bigger dart was cutted at the side to fit the knees on the real costume, so DS did his knees that way and only the darts from DS would fit perfectly his knee.
If you want to put others darts you would need to sand down with a dremel the sides to fit them.
That's possible, BTW if you take your time when doing that, they will be awesome Oh, and for attach the darts you just need to do the hole and glue them at the interior part.
Have your darts the same diameter of the holes in my knee?
if the darts are bigger you could enlarge the holes on the knee...
Could you post some pics with the darts near the holes? It could help to find a solution.
Have your darts the same diameter of the holes in my knee?
if the darts are bigger you could enlarge the holes on the knee...
Could you post some pics with the darts near the holes? It could help to find a solution.
The darts are bigger in dia. to the knee plate holes... the darts were based from Alan's templates. But I have asked Phill if he wants me to correct the issue.
I'd rather Phill modified the darts and not the plates to be honest as those are some awesome knees!
The first picture I have put in a Bobamaker shoulder piece to show off the comparison of CC tone. Also shows some Loctite Super Glue (contains CA glue), padding for the knees, along with Mojo-Fett darts.
I been doing work on my backplate and girth belt lately. Next I'm preparing the harness for my jet pack. I done some markings on my vest through the slots of the backplate.
Anybody got any pics on how they did there slots on there vests to allow the harness to go through.
Phil, as you cant see them due to the back armour you can pretty much cut them out with a knife and fork
All I would recommend is making sure the harness clears the vest completely, you don't want it to snag as the result could alter how the vest sits on your torso. Thats the reason I have what some may describe as "over sided" holes