Page 2 of 2 FirstFirst 12

A little Jango gauntlet project

  1. #26

    Re: A little Jango gauntlet project

    Cruzer ... this is Awesome !

  2. #27

    Re: A little Jango gauntlet project

    Im your huckleberry!!!!!


    PM me a price on a Boba set or make it public if you choose!

  3. #28
    Cruzer's Avatar
    Member Since
    Aug 2004
    From
    Porterville, California
    Posts
    2,747

    Re: A little Jango gauntlet project

    Pm being sent

  4. #29

    Re: A little Jango gauntlet project

    I just sent a PM.

  5. #30

    Re: A little Jango gauntlet project

    PM sent. Incredible work!

  6. #31

    Re: A little Jango gauntlet project

    I was going to ask in PM then deceided to ask publicly. What are the dimensions of these little guys? Length and inner diameters?

  7. #32
    Cruzer's Avatar
    Member Since
    Aug 2004
    From
    Porterville, California
    Posts
    2,747

    Re: A little Jango gauntlet project

    Yeah, sure!

    Gauntlet specs:

    Left gauntlet (Boba style with keypad area):
    length 7.25"
    front opening (across x height on all) 2.125" x 2"
    back opening 3.5" x 3.125"

    Right gauntlet:
    length 6.5"
    front opening 2.25" x 2"
    back opening 3.5" x 3.25"

    These dimensions were taken while holding the two halves together with no hinges. Keep in mind the openings will increase/decrease depending on whether or not you recess the hinges and/or trim down the shells.

    Also, for Jango style, the left gauntlet will be shortened 3/4"-7/8" after cutting off the keypad area.

    And both gauntlets can be trimmed down to approximately 6 1/8"-6 1/4" lengths and still preserve the accurate details in the front and back. Any more than that and you'd start cutting off details like the "lips" in the front of both gauntlets and/or undercutting the rocket/hose attachments in the backs.

    TK2280's gauntlets were both trimmed down to approximately 6 1/4" to accomodate his son's arms.

    I've just taken on two orders of the kid gauntlets and am in the middle of two holster orders, as well as working on another similar special project build. So when I begin to wrap things up in a couple of weeks, I'll take on a few more orders of the kid gauntlets if anyone's interested.

    Thanks
    Cruzer
    Last edited by Cruzer; Mar 16, 2007 at 3:10 PM.

  8. #33
    TK2280's Avatar
    Member Since
    Nov 2006
    From
    Livonia, MIchigan
    Posts
    462

    Re: A little Jango gauntlet project

    Just wanted to say Thanks again to Cruzer and all his hard work on this project. He has done a wonderfull job on the gauntlets and I can not thank him enough. They will be the parts that make my sons Jango stand out. With out Gauntlets like this the costume would end up falling short. any one who has a chance to get a pair should jump at it while they can. The workmanship and time put into the detail make them stand out as much as the full size adult sets. Cruzer, Thank you again for all your hard work and time spent on this project.

    Cruzer, also has made my son one h3ll of a Jango girth belt as well. Thank you for doing that. It was a suprise to see it in the box with the gauntlets.:thumbup



  9. #34
    Jango Nate's Avatar
    Member Since
    Mar 2007
    From
    Fair Oaks, CA
    Posts
    9

    Re: A little Jango gauntlet project

    Cruzer said: View Post
    Yeah, sure!

    Gauntlet specs:

    Left gauntlet (Boba style with keypad area):
    length 7.25"
    front opening (across x height on all) 2.125" x 2"
    back opening 3.5" x 3.125"

    Right gauntlet:
    length 6.5"
    front opening 2.25" x 2"
    back opening 3.5" x 3.25"

    These dimensions were taken while holding the two halves together with no hinges. Keep in mind the openings will increase/decrease depending on whether or not you recess the hinges and/or trim down the shells.

    Also, for Jango style, the left gauntlet will be shortened 3/4"-7/8" after cutting off the keypad area.

    And both gauntlets can be trimmed down to approximately 6 1/8"-6 1/4" lengths and still preserve the accurate details in the front and back. Any more than that and you'd start cutting off details like the "lips" in the front of both gauntlets and/or undercutting the rocket/hose attachments in the backs.

    TK2280's gauntlets were both trimmed down to approximately 6 1/4" to accomodate his son's arms.

    I've just taken on two orders of the kid gauntlets and am in the middle of two holster orders, as well as working on another similar special project build. So when I begin to wrap things up in a couple of weeks, I'll take on a few more orders of the kid gauntlets if anyone's interested.

    Thanks
    Cruzer

    You Must be a Genius Cruzer, I am new to Star Wars and I decided on doing Jango and your stuff is the best I have seen. When your stuff becomes a little cheaper I may have to hop on board, right now I am getting the basic stuff taken care of.

    Nathan Dennis

  10. #35
    CGClone's Avatar
    Member Since
    Feb 2005
    From
    Cordova, TN
    Posts
    556

    Re: A little Jango gauntlet project

    Freakin gorgeous bro....NICE!

  11. #36

    Re: A little Jango gauntlet project

    Cruzer, the gauntlets are wonderful! You so rock!

  12. #37
    TK2280's Avatar
    Member Since
    Nov 2006
    From
    Livonia, MIchigan
    Posts
    462

    Re: A little Jango gauntlet project

    well I have the costume all but done now :P :P all I need to do is make the lens for the mask. and then I am good to go 8) here are some shots I just took today. Let me know what you think








    Thanks again Cruzer

  13. #38
    Cruzer's Avatar
    Member Since
    Aug 2004
    From
    Porterville, California
    Posts
    2,747

    Re: A little Jango gauntlet project

    That costume deserves it's very own thread, where you can post many updates. Good job!!!


    ...and that T-Bone helmet looks just right for him!!! Great Jango!!!

  14. #39

    Re: A little Jango gauntlet project

    PM sent

  15. #40

    Re: A little Jango gauntlet project

    PM sent

  16. #41
    Cruzer's Avatar
    Member Since
    Aug 2004
    From
    Porterville, California
    Posts
    2,747

    Re: A little Jango gauntlet project

    Tuksido, thanks for the question. Due to CIV demands, I'll be molding the kid missile after the event and sending out resin copies to all those who have ordered gauntlets.

    Thanks,
    Cruzer

  17. #42
    fettfan54's Avatar
    Member Since
    Aug 2007
    From
    Kansas
    Posts
    89

    Re: A little Jango gauntlet project

    are they still orderable?

Similar Threads

  1. Gauntlet conversion project
    By Cruzer in forum Boba Fett Costume
    Replies: 27
    Last Post: Oct 31, 2009, 9:14 PM
  2. new project for my Gauntlet...
    By Dead Eye in forum Expanded Universe Bounty Hunters
    Replies: 1
    Last Post: Jan 21, 2009, 12:29 PM
  3. 1st try gauntlet project...HELP !!!
    By Fettism in forum Boba Fett Costume
    Replies: 2
    Last Post: Aug 13, 2005, 12:11 PM
  4. crazyDewback\'s aluminum gauntlet missle project
    By crazyDewback in forum Boba Fett Costume
    Replies: 12
    Last Post: Jul 13, 2003, 8:32 AM
  5. Ego\'s Gauntlet Project - ESB Left AND NOW RIGHT!!!
    By Ego in forum Boba Fett Costume
    Replies: 23
    Last Post: Jan 29, 2003, 6:41 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •