Jango Vest Customisd Tailored to Your size

Why are you offering this in Black? The Jango vest was Gray.

order lis updated. Still taking orders

I know we talked about this via PM awhile back. Just checking to see if you were able to do this in the charcoal gray yet.

Originally Posted by jangofett29

I know we talked about this via PM awhile back. Just checking to see if you were able to do this in the charcoal gray yet.

hello. u got pm~

Can you respond publicly about the black/gray issue? I'm just curious as well.

hello.
firstly, we could nto get any faux leather here in singapore thats charcoal grey. but after checking with my garrison yrs back, they approved it to be black. i do really prefer it to be black in colour; and many others have used the same vest and gotten thier costumes 501st approved.

hello.
firstly, we could nto get any faux leather here in singapore thats charcoal grey. but after checking with my garrison yrs back, they approved it to be black. i do really prefer it to be black in colour; and many others have used the same vest and gotten thier costumes 501st approved

.

Not to detract from your interest thread but if the above statement is true, it sounds like some GMLs aren't following the CRL standards.

Originally Posted by Gee2

.

Not to detract from your interest thread but if the above statement is true, it sounds like some GMLs aren't following the CRL standards.

i dunoe if there was a change in the standards for jango; mine was approved sometime 2004....
but any who, mos of the orders i got were for customized mandalorians.

still up for orders

sending next batch of order this weekend. any other itnerested parties do contact me by this weekend.

Any way I can get one made in a medium browm fake leather look? Sent u a post in the flight suit topic as well.

Originally Posted by TK2280

Any way I can get one made in a medium browm fake leather look? Sent u a post in the flight suit topic as well.

check ur pm =]

While I think the vest is very good quality and was made to my specs. I think it's important to note that I got shoulder bells from Cruzer and the vest sleeves are too narrow.

The shoulder armor hangs over the sides. Was this just on my vest or is it that way on them all? I mentioned the Cruzer armor as it is fairly standard for the movie accurate size that most of us are using.

Other than that I loved the vest. I just can't use it with my Cruzer armor.

Originally Posted by Rupidupe

While I think the vest is very good quality and was made to my specs. I think it's important to note that I got shoulder bells from Cruzer and the vest sleeves are too narrow.

The shoulder armor hangs over the sides. Was this just on my vest or is it that way on them all? I mentioned the Cruzer armor as it is fairly standard for the movie accurate size that most of us are using.

Other than that I loved the vest. I just can't use it with my Cruzer armor.

send me a pic via pm on the problem. i'll see if we can fix it.

if anyone is cheap like me because of the economy trying asking or looking around for some Ciel Blue Fabric Dye, or just order some cheap doctor outfits online, thats what im doing 8)

Hi There

I am new to this and I am starting out. I am currently on delployment, and I want to construct a Jango fett outfit, during my days off from duty. What are the measurement you are looking for. And how much it would cost me? Do you accept Paypal?

Originally Posted by Islandhunter

Hi There

I am new to this and I am starting out. I am currently on delployment, and I want to construct a Jango fett outfit, during my days off from duty. What are the measurement you are looking for. And how much it would cost me? Do you accept Paypal?

u got pm

still taking orders~

Bleahh,

sorry this took so long, but here is a pic of the issue with the sleeves on my vest. They are too narrow given the proper placement of the Cruzer, shoulder armor, which is fairly standard to screen size.

The armor should come to the edge of the sleeve but not over it. It is the same amount over on the opposite side as well. This picture is a center placement shot.

Bleahh,

sorry this took so long, but here is a pic of the issue with the sleeves on my vest. They are too narrow given the proper placement of the Cruzer, shoulder armor, which is fairly standard to screen size.

The armor should come to the edge of the sleeve but not over it. It is the same amount over on the opposite side as well. This picture is a center placement shot.

Originally Posted by Rupidupe

Bleahh,

sorry this took so long, but here is a pic of the issue with the sleeves on my vest. They are too narrow given the proper placement of the Cruzer, shoulder armor, which is fairly standard to screen size.

The armor should come to the edge of the sleeve but not over it. It is the same amount over on the opposite side as well. This picture is a center placement shot.

the dimensions of the shoulder bell is pretty much made in proportion to the 'short sleeve' length; so you wont look like an oversized bird with small 'wings'
i need more details.
u got pm~

I'll get another pic. The length of the sleeve is just right they are just too narrow to for the bells to fit on width wise. As shown in the first pic I sent.

Originally Posted by Bleahhh

the dimensions of the shoulder bell is pretty much made in proportion to the 'short sleeve' length; so you wont look like an oversized bird with small 'wings'
i need more details.
u got pm~

taking orders now

Still up for orders

Originally Posted by Bleahhh

Still up for orders

How fast could it be done?
Halloween?
I've left this too late I fear!

still up for orders

Hi Bleahhh !!
Nice designs..I liked them all..
Are you still taking orders...I want a suggestion for men's suit,if you can give..I have thought whole design of a suit of a fatty man around 300 lbs only shoulder portion is left. can you send me a some ideas of shoulder design which will make him look less broad, less fatty and a bit fit also.

Regards,
Nelson
Custom Tailored Suits

we'll be taking a break for nov.
any interested parties can still pm me, and i will get back to you after the 2nd dec.


thanks for the support thus far~

We're back and taking orders now~

How much would it cost for a vest with the size Adult Small? E-mail me.
----
Thanks,
--OrdoMereel

Originally Posted by OrdoMereel

How much would it cost for a vest with the size Adult Small? E-mail me.
----
Thanks,
--OrdoMereel

uu got pm... and email

are you still taken orders?

Originally Posted by Blacklobo

are you still taken orders?

u got pm

still up for orders

I managed to get in more materials for the vest, and i can do another 3 sets at slightly lower cost; $82 compared to the usual $90.
The waiting time will also be shorter; 3-5 weeks compared to the usual 4-9 weeks.

I'm interested, but only if you can do the charcoal gray.

Originally Posted by squirk

I'm interested, but only if you can do the charcoal gray.

I still cannot get a material which is good enuff or close to the charcoal grey many are asking for.

I will be seeing if i can provide the charcoal grey as an alternative to the current black.

any further updates, pls refer to this consolidated thread:
http://www.thedentedhelmet.com/showt...AR-HOLSTER-RIG