Jango Rubies 2 piece

hey all just want to share my experience with a rubies helmet I got real cheap on ebay.

I did a rubies first because i didn't want to get a expensive kit and mess it up. So I decided to practice on the rubies.:jango

I used plumbers pvc glue to attatch the two pieces...then used plumbers cement to back up the seam on the inner seam. then used two screws to secure the sides..

did a lot of sanding and then painting....

on the exterior i used bondo glazing and spot puddy....it worked well, but you can still see the seam a little on the edges of the dome and a couple places where i mest up a bit...

but i think you can see it's much improved from the standard two piece rubies..:jango

Great job there buddy. It looks much better than the plain old mass manufactured rubies.

time for some CPR... Breath.... Pump pump pump....
AHHH it's alive... I have brought the thread back to life...

Anyway, I have a question about the 2 piece.. Is it smaller or larger or the same as the Deluxe? I have the deluxe and it fits me, but as usual, it warps.
Besides that I wanna' make a few custom Mando's.

Any help on sizing would be appreciated.

Here's my first custom and my Rubies Rubber Ducky:wacko