I like helmets

interesting....is Asoks FP's mold? I forget...Ive seen a FP jango lid it didnt seem as small as asoks though
 
Last edited by a moderator:
No, the mold I have is not from FP's or molded off a helmet FP cast. And from I have been told, ILM did not make the Jango helmet. A company from down under made it, per Don Bies.
 
Last edited by a moderator:
I wont one of each helmet ever made with liniage to either a Jango an Boba , ,
So when i asked the previous question it was puerly coz i like helmets ,
Take that which ever way , but thats the botom line ,
if i say somthing to upset any one , take it up with me , no need to go an tell the teacher and make up lies now is there , you know who you are
how about you man up and PM me and we could have descused it like grown ups not play games like children
to get your measliy brownie points
 
Last edited by a moderator:
as far as the recasting shrinkage thing goes... you've got to use some poor silicones for that to be noticeable after a couple of generations. the stuff i use, rebound 25, is 0.001 inches shrinkage per inch. so over, say, a 10" span you're only talking about 0.010 inches. i know i can't see that by eye ;)
 
Last edited by a moderator:
I was only asking if it was FPs mold because I wasn't sure...not a FP recasted. And a comparison would be great for those people with larger heads, the Asok helmet was to small for me
 
the "ILM" helmets are all the same size: so asoks, fp's, bm's, all the same. the only difference is casting techniques. if you want a larger helmet then cruzer is the way to go; since it's a fan sculpt and doesn't have lineage to a screen used helmet.
 
Jinto, you will get a get a lot of flack when you make almost anything. It is just something you learn to deal with. There have been many a time I thought about not making stuff any more.

As for the Jango helmet being made by ILM Here is what I was told by Don Bies when I tried to give credit to whom I thought should get the credit.

Could you clarify what you are calling an "ILM" Jango Helmet? Do you mean a screen used helmet? Or do you believe the ILM Modelshop made a Jango Helmet?

All the screen used Jango Helmets were made by a host of talented craftsmen in Sydney, Australia--far from the confines of ILM and Marin County. If you have evidence that the ILM modelshop made one, I'd like to hear it. If not, and you simply mean screen-used, then please change the title of this thread, as it does a disservice to those who actually did the work.

--Don Bies
 
I'm confused but love the discussion. Asok, I love the helmet you made... It's a bit of a tight fit but my grape fits in it so I'm cool... I just can't put too much in it to make it a little more comfortable. I may have to buy a Cruzer since I'll definitely be wanting to troop with a more comfortable lid. Either way, I'm happy!!!

My wife isn't, but then again I'm still working on multiple costumes (TOR Jedi, TOR Sith, Jango/Mando, and soon a Fett) so she is like when are you going to stop? :)
 
the "ILM" helmets are all the same size: so asoks, fp's, bm's, all the same. the only difference is casting techniques. if you want a larger helmet then cruzer is the way to go; since it's a fan sculpt and doesn't have lineage to a screen used helmet.
The BKBT is definitely larger than a screen used, but I'm not entirely certain the BKBT is a complete fan sculpt. It seems like it could have originated from a modified Boba helmet, but I would need to check with BKBT if someone here doesn't already know the answer and can enlighten us.
 
Jinto, you will get a get a lot of flack when you make almost anything. It is just something you learn to deal with. There have been many a time I thought about not making stuff any more.

and there are excellent reasons why i don't really offer any of the stuff i create up directly.

i give my molds to other people and let them deal with the nonsense that comes of being a "Seller" ;)
 
The BKBT is definitely larger than a screen used, but I'm not entirely certain the BKBT is a complete fan sculpt. It seems like it could have originated from a modified Boba helmet, but I would need to check with BKBT if someone here doesn't already know the answer and can enlighten us.

I was always aware that BKBT's helmet was a complete scratch sculpt. Now one thing that alot of people don't know is that the current one you have molds to are actually his Version 2 sculpt. I knew a 501st member that has or probably no longer has anymore, a version 1 of his Jango.

I do have a few comparison shots somewhere of an ILM and a BKBT..I think I actually posted it in one of my comission builds..BRB
 
Got it, from my build of SoulAssassin's build awhile back. BKBT is on the right side

First thing that is apparent, is the size difference. Ive heard that the ILM is significantly smaller then BKBT's bucket, with a width of about 9 1/4 inches, whereas BKBT' is about 9 3/4 inches wide (measured from where the ears lay flush; did NOT include the ear's width)

006-19.jpg


007-16.jpg


008-11.jpg


009-6.jpg


There appeared to have been some stress cracks on this side of the helmet, which I'll have to bondo up before painting.

003-30.jpg


Overall, I really have to commend BKBT's work on this, I dont know the circumstances for when he sculpted the helmet, but I know that he was very **** close as far as the accuracy of it. The fact that he made it larger, yet maintain the appropriate details really affirms my satisfaction for getting it. Ive considered re-shaping the width of the visor, but I gotta say, Im not, because it's unique to the BKBT helmet, and I really love the "clint Eastwood" squint
 
This thread is more than 13 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top