Cruzer Jango leg armor project--revisited

I'm in the same range height-wise as Cruzer and Seeker and I also take offense to the "small folk" talk. We prefer the term "Temuera Accurate." :lol:

Seriously though, I think 9.5" is fine. My measurements show them to be about 9" long and 9.5" looks fine on Turo. I wouldn't go any longer than 10". One of the things I remember about seeing these in person was just how small they looked on the mannequin.
 
Trust me guys when I say far better shorter then taller. The world is made for thos 5'6" to 5'10". Like I said easier to trim down than add bondo to make em bigger!

And they dont call me "The worlds biggest Jango" for nothin' LOL

It was pretty funny to see Temura do a double take and look up! LOL
 
here's a pretty good picture of some size differences. Tem is about 5'8" or 5'9"

dudes.jpg
 
I will def be interested in a set once you get them going Cruzer.

I have no doubt that they will finish up spot on like your other things.
:D

Tony
 
Thanks for the input guys. So right now, I'm thinking that 10" would be idea for most people and still leave room for trimming at the bottom if necessary. Let me know if this doesn't sound good.
 
Foxbatkllr said:
Sounds good, and hopefully it will still look accurate when trimmed to the screen worn size.
Click to expand...
What would you say is the accurate screen size? Because if we've got Turo wearing 9.5" shins, then the 8.5" or 8.75" thought previously may have been way off. I want to make them as accurate as possible, but you're right, I don't want to compromise accuracy if trimmed.
 
My vote is for Screen Used size.
Looking at Turos scaled pics, and using the westar as a measure, that looks to be slightly under 9.5".
Thats the length I'd want them.

And Turo, what up with that pic: Jango and Boba MIXED!!! You have Boba and Jango pouches, Boba Vest, and a Boba sidearm!!
LOL.

OSK
 
With an architect's scale ruler like the one Darth Steven used and a picture of it from the matching perspective as his picture of the shin, we could probably figure out the exact measurements. Of course, if he could just tell us what he measured that'd be even better.
 
Well, I'm heading to the Sci-Fire shop today to specifically fabricate Jango shins, and then mold the shin armor along with my already fabricated boot armor. If I can, I'll squeeze in some thigh armor, but we'll just have to wait and see. I'll shoot some progress pics later tonight of what we were able to come up with.(y)

Cruzer
 
I didn't do anything to it...for some reason that link just doesn't work. Anyway, I replaced the image with a new link to it just now.
 
This thread is more than 15 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

KaliFett
Jango Dented helmet by Cruzer.
Replies
7
Views
1,255
Rook 3
Rook 3
PistachioNut
Jango Fett 3D Armor Files
Replies
2
Views
741
PistachioNut
PistachioNut
JangoTim
JangoTim’s WIP Jango
Replies
1
Views
421
BudaFett
BudaFett
JangoTim
Jango Parts Info
Replies
3
Views
451
robotzo
robotzo
DrToothache
DrToothache's Jango WIP (Kamino)
Replies
8
Views
978
DrToothache
DrToothache

Similar threads

KaliFett
Jango Dented helmet by Cruzer.
Replies
7
Views
1,255
Rook 3
Rook 3
PistachioNut
Jango Fett 3D Armor Files
Replies
2
Views
741
PistachioNut
PistachioNut
JangoTim
JangoTim’s WIP Jango
Replies
1
Views
421
BudaFett
BudaFett
JangoTim
Jango Parts Info
Replies
3
Views
451
robotzo
robotzo
DrToothache
DrToothache's Jango WIP (Kamino)
Replies
8
Views
978
DrToothache
DrToothache
Back
Top