attaching jetpack harness to jetpack HELP NEEDED

Here's pictures of my jetpack harness.



How is it attached to my jetpack?

You don't have any hooks?

this is for a jango. you'll have to cut slots in the jetpack, about a third of the way down then figure out how you want to mount anchor point(s) inside, then run the webbing from the anchor up through the slots and attach the female end of your side release clips. make sure there's no slack between the slot and the female end, then make the needed adjustments to the straps coming off of the harness until you have the length you want.

In the second picture you still have the parachute clips together. The female end of the parachute clip will be attached to the jetpack. Make sure to attach them low enough on the pack because Jango's pack rides high on his back.



Uploaded with ImageShack.us

Seeker also has some great shots of how to in his flickr album

- - - Updated - - -

see if this link works....

http://www.flickr.com/photos/arturoseeker/4685243857/in/set-72157624107773765