2nd Cruzer Jango backplate run open 6 PM on 8/2!

**Cruzer** · 07-31-2007, 07:48 PM

Ok guys, I'm finishing up the last of previous orders and only have a few more weeks before it's time to head back to work. A handful of people have contacted me about needing a backplate since the close of the last run. So it's got to be now or much later if I'm to do any more runs. The mold is showing signs of wear and is probably good for about another dozen pulls before I won't pull from it anymore due to quality reasons. So...

...I'll open up a run of 10 backplates at 6:00 P.M. (PDT) on Thursday, August 2nd.

The reason I'm postponing the opening of this run is to allow everyone a chance to become aware of it, decide if they need one, and get paid.

Prices will still be $95 shipped in the U.S. If you live outside of the U.S. you can hold a spot on the list by sending in a payment of $95 and then we can figure out the additional shipping charges soon thereafter. Production will start about a week (how long it takes to get the resin) after the list closes and the order for resin is placed. This run is promised to go a lot faster due to me not having girthbelt, holster, and bolo orders going simultaneously. I estimate producing 3-4 backplates a week, and then shipping them out in small waves on Saturdays.

I'll post my paypal addy now, but please do not send in any payments until after the opening time or I'll refund your $$ and put you on the "tried to cut at the head of the line" naughty Mando list.

I'm also in the last few weeks of summer vacation with my kids, so please understand that I'm only doing this for you guys because so many people have contacted me with a need. So please be patient with me if I am shy a backplate one week because the little Mandos wanted daddy to take them fishing one morning or camping overnight.

My paypal addy is still Lorenzo_Cruz1@msn.com .

Thanks and let the fun start...in approximately 46 hours.

-Cruzer

**The List is Closed**

Run List
1.SEEKER(paid) shipped
2.tc-2917(paid) shipped
3.Whitearmor(paid) shipped
4.Foxbatkllr(paid) shipped
5.SWfreak(paid) shipped
6.Admfrancis(paid) shipped
7.WelderTim1208(paid) shipped
8.Eskilax(paid) shipped
9.bobafett669(paid) shipped
10.Steelblitz(paid) shipped
11.Dark-Side(paid)
12.Hakaider(paid) shipped

**td0488** · 07-31-2007, 08:11 PM

Get on the list quick. I got mine and it is an awesome plate.

**Foxbatkllr** · 07-31-2007, 08:16 PM

Yay!!! I've been waiting for the next run. I am so in!

**Steelblitz** · 07-31-2007, 09:09 PM

Put me down for one too.

**AdmFrancis** · 07-31-2007, 09:38 PM

..GREAT, put me on for one please

PM me for shipping to germany :thumbup

**Jango 5204** · 07-31-2007, 10:03 PM

This is going to go fast.

**Jimmy BufFETT** · 07-31-2007, 10:18 PM

Originally Posted by Cruzer

..I'll open up a run of 10 backplates at 6:00 P.M. (PST) on Thursday, August 2nd.

Don't you mean 'PDT?'

Originally Posted by Jango 5204

This is going to go fast.

I've got a feeling there are gonna be a bunch of posts right at 6PM. How long until all of the slots fill up? 1 minute?

**Cruzer** · 08-01-2007, 12:38 AM

Thanks, I made the change. I thought it was called Pacific Standard Time. Shows how much I know about time zones.

I don't think it'll go too fast. There were only about 6-8 people that had contacted me, so hopefully 10 slots is enough to fill the need. But you're right it could get ugly if that's not enough. In that case, I'll be standing by to confirm the slots and close the list when necessary.

Thanks guys, and any one needing pics of what the backplates look like can check out the last run thread: http://www.thedentedhelmet.com/f28/cruzer-jango-backplate-run-now-18904/

thanks

**SWFreak** · 08-01-2007, 06:21 AM

I know I've been waiting since the first run.

**SEEKER** · 08-01-2007, 06:32 AM

Meeeee!!!!!

**bobafett669** · 08-01-2007, 12:43 PM

Me! .. Me! . .Me!!!

**TheDentedOne** · 08-01-2007, 12:55 PM

Please put me on that list!

**WhiteArmor** · 08-01-2007, 02:40 PM

I will be awaiting this. It is one of the last pieces of armor plating I need, so I cant wait.

**tc-2917** · 08-01-2007, 03:05 PM

I want in!!! PM Sent

**CGClone** · 08-01-2007, 08:24 PM

Im in as well.

**AdmFrancis** · 08-01-2007, 09:46 PM

..email/pm send ;o)

**CaptJono** · 08-01-2007, 11:05 PM

Just started work on mine, both Uber accurate & a really well made item.
Makes you want to leave the jet pack at home!

Jono!

**JangoUri** · 08-02-2007, 05:16 AM

Originally Posted by CaptJono

Just started work on mine, both Uber accurate & a really well made item.
Makes you want to leave the jet pack at home!

Jono!

Agreed. If Jango Costume didn't have a Jet Pack I would have already bought this backplate. That's the only thing that retains me

**Cruzer** · 08-02-2007, 09:43 AM

Thanks guys for both the interest and endorsements! I appreciate them.
CaptJono, glad you like it, it's looking good so far.
JangoUri, I hear you. If you're one of the lucky few with a V2 JD backplate, that is a very good backplate.

I am kinda getting bored now that the other orders are done, so I'm looking forward to this run!

I'm also thinking maybe I shouldn't let SEEKER have a backplate so the rest of us can be "one-up" on him on at least one piece of the Jango suit!!!

**SEEKER** · 08-02-2007, 02:41 PM

Originally Posted by Cruzer

I'm also thinking maybe I shouldn't let SEEKER have a backplate so the rest of us can be "one-up" on him on at least one piece of the Jango suit!!!

**WelderTim1208** · 08-02-2007, 04:04 PM

I'll take a spot on the list if there is one available.

**Foxbatkllr** · 08-02-2007, 06:02 PM

Finally! 6pm. Paypal sent.

**SWFreak** · 08-02-2007, 06:02 PM

Paypal sent

**CGClone** · 08-02-2007, 06:03 PM

Ok, I have 6:02 p.m. on the clock here, I would love to be in on this run please sir!

**WhiteArmor** · 08-02-2007, 06:04 PM

PP sent at 6:01 PM PST. Hope I made the run.

**Cruzer** · 08-02-2007, 06:07 PM

CGclone, first paid first served.

Got the rest of you on the list!

**Cruzer** · 08-02-2007, 06:08 PM

3 spots left.

thanks guys

**WhiteArmor** · 08-02-2007, 06:13 PM

Originally Posted by Cruzer

3 spots left.

thanks guys

Geezz..that filled up fast. Glad I stayed up late now to make sure I got on. Other wise I would have missed this great back plate once again. Thanks Cruzer..you da man.

**Jimmy BufFETT** · 08-02-2007, 09:23 PM

You mean to tell me there are still spots open?

**WelderTim1208** · 08-02-2007, 10:20 PM

One less now. Payment sent.

**Cruzer** · 08-03-2007, 05:55 AM

The fewer the better. I just wanted to cover everyone that needed one so that I can move one to another project.

The resin has just been ordered.

thanks

**Benkenove** · 08-03-2007, 09:20 AM

I've said this many times, and I wont be tired of saying again...

Cruzer, you are a beast !!!

I'm dying to see the next project

Count me on.

**Scott Kaufmann** · 08-03-2007, 12:56 PM

Another project? Whatever could you be cooking in the under-developed head of yours?

**Cruzer** · 08-03-2007, 04:30 PM

The list is now closed.
Thanks guys!

**Cruzer** · 08-04-2007, 01:09 AM

Originally Posted by TxFett

Another project? Whatever could you be cooking in the under-developed head of yours?

If my so called "under-developed head" was able to come up with fairly decent Jango holsters, girthbelts, backplates, flamethrowers, and kid-sized gauntlets...then what's your excuse?

Oh, and don't forget...I'm the guy that's currently repairing your Boba knee armors!

**Jango 5204** · 08-04-2007, 08:11 AM

Originally Posted by Cruzer

If my so called "under-developed head" was able to come up with fairly decent Jango holsters, girthbelts, backplates, flamethrowers, and kid-sized gauntlets...then what's your excuse?

Oh, and don't forget...I'm the guy that's currently repairing your Boba knee armors!

TXFett still having knee problems???

I got a good pneumatic nail gun........

Cruzer you get my PM on the blaster?

**Cruzer** · 08-29-2007, 12:56 PM

Hey guys, bobafett669 was kind enough to remind me today that we need an update of this run. The mold is "tired" after almost 20 pulls, and is taking a little more effort to pull from. Based on the run list, #1-4 will go out tomorrow with #5 starting tonight. Depending on real-life obligations, I'm only getting to pull one backplate roughly every 2-3 days. I'll continue to plug away at them and update when I can.
Any questions, let me know. And if the time frame isn't working for anyone and they need to be dropped from the list and refunded...no problem.

Thanks
Cruzer

**Cruzer** · 09-06-2007, 08:45 AM

First post updated with shipping status.
bobafett669 & WelderTim1208, yours should go out this Friday or Saturday.
Haikaider, production will start on yours tonight.
The last pull was next to impossible to get out, so these are the last that'll be pulled on this mold.

Thanks guys

**Robeewankenobe** · 09-06-2007, 07:39 PM

I know your list is closed but what would it take for you to do another run?
Cuz, I need one

Thanks
Rob

**Cruzer** · 09-07-2007, 07:54 AM

Hi Rob, it would take enough interest in another run (approx. 10 orders) to justify the costs of making another mold. This mold has seen the last of its days and really was not made as effectively as possible. A solid silicone mold would be ideal in my opinion, but then we're looking at about $300 in silicone.

However, there is a possibility that my backplate master is going to be molded this weekend by the Sci-fire crew for the purposes of making cold cast pulls. If so, I could probably swing a couple of regular resin copies from it, but I wouldn't want to do too many in order to maintain the mold's integrity for cold casting.

**Jango72** · 09-07-2007, 08:38 AM

Depending on the time frame, ( read - I curently am broke ) I'd be interested. I'm not entirely confident on how a scratch built one will turn out, even with using WoF templates.

**TK0363** · 09-07-2007, 09:44 AM

I would also be interested if you make another mold to do fibreglass ones again, especially if it was to coincide with the gauntlets so the postage was not too much to the UK.

Cheers

Tony

**WhiteArmor** · 09-07-2007, 03:06 PM

Thanks for the updates man..I saw mine shipped. Thanks.

**Cruzer** · 09-07-2007, 04:11 PM

Originally Posted by Jango72

Depending on the time frame, ( read - I curently am broke ) I'd be interested. I'm not entirely confident on how a scratch built one will turn out, even with using WoF templates.

Yeah, most of the sintra or styrene scratch built backplates I've come across looked like those usually seen on ebay. Though very economical, they usually aren't very accurate.

Your comment does bring up a good question. Would there be interest in vacformed copies of my backplate sculpt that are more economical? Unintentionally, I've only considered users of fiberglass armor, and failed to consider the many people who use some sort of plastic type armor. It would be good if I could meet the latter's backplate needs as well.

I'm going to check my resources to see if I can even find access to a vacform machine that would be large enough.

thanks for the idea

**WhiteArmor** · 09-16-2007, 07:37 AM

It has been awhile since I popped on to this thread to check progress. I just saw mine shipped and I wanted to say thanks Cruzer for the hard work on this. Now I can not wait to get it!

**Steelblitz** · 09-16-2007, 08:48 AM

Got my backplate last week, very nice! Thanks Cruz!

**AdmFrancis** · 09-17-2007, 10:31 AM

..i just received mine. awesome!!! very nice work!!! thx a lot cruzer

**WhiteArmor** · 09-18-2007, 02:16 PM

Mine arrived safe and sound this afternoon. I must say it looks great too, good job as always Cruzer.

**WelderTim1208** · 09-18-2007, 09:41 PM

Mine also arrived today in pristine condition. Thanks Cruzer

**SEEKER** · 04-12-2008, 09:36 AM

Could you add this request to my backplate?

Thanks man.

**Cruzer** · 04-12-2008, 11:27 AM

Originally Posted by SEEKER

Could you add this request to my backplate?

Thanks man.

What is this...Burger King..."you have it your way"?

Actually, that's something that has been done since the first backplate shipped out.

**SEEKER** · 04-12-2008, 11:33 AM

Your the man!!

where were you last night? no more COD4?

**Mojo-Fett** · 04-12-2008, 12:25 PM

Originally Posted by Cruzer

What is this...Burger King..."you have it your way"?

Too funny!

**CGClone** · 04-12-2008, 01:10 PM

Cruzer, are you taking anymore orders for your backplate?

**Cruzer** · 04-12-2008, 01:30 PM

Between the gauntlet runs and holsters, I probably haven't played in over a month. I do need to log on one of these nights though and take a break.

I haven't been able to get down to the sci-fire shop to make a new/better mold for my backplates. However, for those desperate needs, I can still pull backplates from my old mold, but it's a little tougher to pull them out of the mold and they usually develop a few cracks in the gel-coat layer due to the permanent fg jacket shrinking a bit on me. With a little CA glue the cracks are repaired and sealed permanently, but still.

**JDFett** · 04-14-2008, 05:26 PM

im waiting for the new mold...keep me posted bud!

**CGClone** · 04-15-2008, 07:03 AM

I can wait or if you want to pull one now...your call.

**bobafett669** · 04-23-2008, 07:34 AM

Hey Seeker, What is that around the snaps? Is it CA glue you used to attach the snaps or something different?

**Cruzer** · 04-23-2008, 12:44 PM

It looks like Special-T CA glue (green label).
It works perfectly for me for this application.

2nd Cruzer Jango backplate run open 6 PM on 8/2!

Thread Tools

2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Re: 2nd Cruzer Jango backplate run open 6 PM on 8/2!

Similar Threads

Cruzer Jango holster run for August

Cruzer Jango gauntlet run!

Cruzer Jango holster orders

Cruzer Jango backplate run now on!

Posting Permissions