UPDATED PRINTABLE ARMOR TEMPLATES - In various sizes

UPDATED 6/25/08 Small Size Armor Added
Size from 5'-6" down to 3'-4"

Hello,

Well, I finally got around to converting my Boba Fett Armor CAD files into standard GIF images that will print out on standard 8 ½” X 11” paper they come in three basic sizes, but I have included scaling factors to cover folks from 5’3” to 6’. For those over 6’ I will be working on an extra large version in the near future. For the time being you can try print the Large Templates at scaling factors of over 100%, but you will have to print out the templates out on additional sheets

Each Zip file is over 3 MB each, and they each contain 22 files. The armor files consist of 20 8 ½” X 11” pages and 1 layout drawing, some of the armor pieces have to be printed on multiple sheets and then spliced together. I have included witness marks on these sheets to facilitate matching up the pieces. These files are full size and do not require the “Fit To Page” print option, simple print at 100%.

The 22st file is a printer test page that contains a 5” scale in both the horizontal and vertical, I’d recommend printing this page before attempting to print the templates to verify that your printer will not distort them. Just print it out and measure both scales they should equal 5” each, if not then check your printer options

My bandwidth is limited and with the size of these files it won’t take long to exceed it, please be patient they will be online for some time

See the Jango section for downloadable Jango armor templates.

If you have any questions or comments please let me know

Alan
wizardofflight@comcast.net



Template ZIP Files & Scaling Factors]

http://home.comcast.net/~wizardoffli...rmor_Large.zipLarge Templates are designed for a 6’ tall individual.
For 5’11” print the Large templates at 98.6%
For 5’10” print the Large templates at 97.2%[

http://home.comcast.net/~wizardoffli...mor_medium.zip
Medium Templates are designed for a 5’9” tall individual.
For 5’8” print the Medium templates at 98.5%.
For 5’7” print the Medium templates at 97.1%.

The Small Templates are listed in the attachments below the pic. They range from 3'-4" on up hopefully you'll find something that will work.

http://home.comcast.net/~wizardoffli...or_X_Large.zip
Large Templates are designed for a 6’3” tall individual.
For 6’2” print the Large templates at 98.6%.
For 6’1” print the Large templates at 97.3%.




http://home.comcast.net/~wizardoffli...v_B_BF_TPs.gif

WOW all this work!!!! People like you make this place great.

:D well that looks awesome, but uhw.... ****... I'm 1 m 87 cm.... wich one do I need?

Quote:

---

Originally Posted by R_boba_fett

:D well that looks awesome, but uhw.... ****... I'm 1 m 87 cm.... wich one do I need?

---

If you are 1,87 then the Large printed at 100% would suit you fine.. i don't think than an inch or so back and forth doesn't make that whole lot of a difference.. it's the entire image that people look at.. not the details..

(unless they are one of those really picky people... the kind that looks down on the FX Stormtrooper helmet and think it looks like **** just because its 10% to big... <sigh> )

Hello,

The large templates should do fine.

I should point out that the sizes listed above are merely just guidelines since everyone is different, there is no such thing as a standard size human, some have long legs other may have a long waist. You may have to try various sizes before you find the one that best suits your body proportions. Unfortunately there are no black and white answers. Jango is even harder to fit, the size that works for the upper body in all likelihood will not work for the legs.

Alan

whenever i try to open up the pics i just get a BIG RED X

You my friend are awesome. I'm deleting all of my old ****** templates and using your from now on. Way to go amigo!!!

I gotta say...WOW...great templates!

Quote:

---

Originally Posted by BobaFettSlave_1

whenever i try to open up the pics i just get a BIG RED X

---

I have checked the online files and they appear to working, but you are not the only one having difficulty. The files are quite large 4000 X 5000 pixels so that may be giving you software some problems. What program are you using?

Is anyone else having difficult viewing the templates? I can try to creating a lower resolution version if that is the problem.

Thanks guys, hopefully everyone finds them useful.

Alan

Sorry to vent my frustration. You did a great job. I am just VERY pissed that I spent the last WEEK doing the exact same thing... I should upload mine up here too. Nice job man.

Thanks for the encouragement.

I have created a set of low res templates of the large size for those having trouble with the full size version above, these are about ½ the size. The trick with these is that when you print them you WILL have to use the “Fit to Page” printer option. Also these templates assume a ¼” boarder, so if your printer does boarderless printing you will need set the printer’s boarder option to .25”.

http://home.comcast.net/~wizardoffli...LG_low_res.zip

Please let me know if these work and I will put together a set for the small and medium sizes as well.

Alan

darkskywalker: These have been in the works for a while just finally got around to breaking them down into a printable version. Too many other projects.

nm it works on my other computer. luckly thats the one with the printer:)

I am guessing I am just stupid because when i open these in photoshop they are MASSIVE. Is there something else I need to do?

Thanks in advance

JDH

BobaFettSlave_1: Excellent, glad to here they are working.

Jades Dark Heart:
The files are 8” X 10.5” at 200 DPI so they are huge, but they should print out on a standard sheet of paper. If not let me know what your system is doing and I try to make some adjustments.

Alan

When I look at the image properties this is what I see

JDH

http://www.blockheadpictures.com/imagesizeissue.jpg

Hey WOF, I wonder if you have seen this. I dont know if its you selling them, so I thought i would let you see this. I know we arent supposed to post live auctions, but in this case i think it would be ok.
http://cgi.ebay.com/ws/eBayISAPI.dll...sPageName=WDVW

Jades Dark Heart: Change the resolution from 72 pixels/inch to 200 and that will reduce the templates down to 8" X 10.5".

Rimshot:
WOW! No not me, I have been doing that for the folks here for FREE.

Alan

Its a shame people will try to make a buck off the awesome and extremely generous work of a member here. We should let them know how we feel.

That was fast. It would make sense that the person selling that is a member here then, right?

OHHH wow! THey just changed the image in the auction! They must be watching this thread....

Quote:

---

Originally Posted by Jango_Fett_Jr

That was fast. It would make sense that the person selling that is a member here then, right?

OHHH wow! THey just changed the image in the auction! They must be watching this thread....

---

Edit: Read below.

The original image was the image straight from the top post, except coloured it. It's a shame people have to ruin the whole spirit of this forum and hobby by making profit off generous, talented people.

This is no different than recasting. It is stealing someone else's work. If the auction does not come down, there will be a banning.

Guys,

Sorry to mislead you. I am the owner of the auction, however I am not stealing his fine work. I have in fact created a CAD template that was in the works well before this was posted. (see above) This thread just created a stir of making a few extra dollars online using the work I had created. I will distribute the CAD file to anyone who wants it for free, but the auction on line is for a scaled plotter printout (in other words, not 22 pages) of the armor. Again, its not traced from his work. In fact, I created the armor I also listed on ebay based on the drawings I created. I feel ashamed that this is how I must be conveyed on my first few days on this board. I am a digital arts major trying to make a little extra cash, thats all. I used the image above as placeholder until I got home, and when I saw that someone noticed it I immediately changed it to the actual drawing. Sorry for the confusion and I apologise sincerely. Please accept it, members, and of course wizard.

-Josh

Here is the CAD file if anyone is interested in checking. It is even to scale. Im not trying to hijack this thread (please note). Thanks and sorry again.

http://plaza.ufl.edu/jjavahe/boba.zip

how do i print it...i've got a windows 98

cooltd825: Which ones mine or darkskywalker?

You can print mine with any image program, as they are just GIF files.

darkskywalker's will require AutoCAD or a compatible CAD program.

Alan

darkskywalker, thanks for clearing that up.

Wizard thanks allot I will try that this morning and see if that does the trick. Thanks for offering these :)

Greg

Quote:

---

Originally Posted by Jades Dark Heart

Wizard thanks allot I will try that this morning and see if that does the trick. Thanks for offering these :)

Greg

---

Please let me know how it works out.

Alan

I would like to thank the Dent and everyone for their support and encouragement and quick action on my behalf. It is clear darkskywalker’s templates are of his own creation and that there was no attempt to bootleg mine. He has taken action by replacing my layout drawing with his own to correctly reflect the product in his e-bay auction. At this point I am considering the issue closed.

Thank you for your support. This is a great place with fantastic people, it's a pleasure being part of this community.


Alan

Im sorry I started this whole issue, when it ended up being nothing. Im not sorry about looking out for my fellow members though, even if it is nothing. I would hope everyone would do the same for me. Thats whats great about a family like this.

There is nothing to apologies for that was an excellent catch, one never knows. There are a lot of scammers out there and I would hate to think that someone had to pay for something I am will to give for free. It has happened before, but luckily I managed to stop it before anyone got ripped off.
Thanks for watching my back.

Alan

Please Note:

Well as is always the case I made a change to the templates. I was doing a mock up of the backplate and noticed that the shoulder straps were just barely long enough. So I went and lengthened the shoulder straps by 1" so that they will allow for trimming during the fitting process. All of the zip files have been updated.

Alan

Hello,

I thought of a couple of more things to consider when cutting out the armor. It would be a good idea to cut the templates out of poster board or craft paper first and then test fit them in order to iron out any problems before cutting the Sintra. Also, the cod piece belt and the back belt are currently set to handle 40” around with a one inch overlap on each side. While 40” should accommodate most folks it might be advisable to add a few inches to both the cod piece belt and the back belt on each side, the excess can be trimmed away during the fitting process. The belt sits lower on the hips so it will be required to be larger than the standard waist line.

If anyone has additional words of wisdom please feel free to post them.

I’m thinking of putting together a tutorial to go with the templates. If is something that folks would find useful please let me know.

Alan

I have printed them out and cut them out and its GREAT!!

But I was hoping there were Shin. Thigh and Knee Armour.......And Gauntlet Plans??! haha..

Jango Fett leg armor is in the works as well as knee armor.

Alan

When do you think you'll be ready with the templates for the guys over 6'. There are a lot of them out there. Although right now I'm perfectly fine with printing them out at over 100% size, just glad you made these. Thanks.

Quote:

---

Originally Posted by team_fett

When do you think you'll be ready with the templates for the guys over 6'. There are a lot of them out there. Although right now I'm perfectly fine with printing them out at over 100% size, just glad you made these. Thanks.

---

I've been out of town for the past week, so I haven't gotten anything done. In the past I have been doing custom templates for the large size Fetts out there, but I will be putting together some XL & XXL templates. It does gets a little tricky trying to fit the pieces on to 8X11 paper.

So, what would really be helpful is if I can get a idea of what sizes are needed, that way I can focus my efforts on those first.

Alan

Man, I can't believe I didn't catch this thread earlier! wizardofflight, where were you 4 years ago when I made my armor? You would have saved me a ton of time! This is some really nice work and you rock for sharing it to the board for free.:thumbsup

This is so AWESOME! Wizard is a beautiful human being!

I just found a place in my area to get Sintra from and now I find this thread. Everything is falling into place for my Fett suit.

As for the ebay issue, before I was told about TDH, I would have loved to find info on ebay like what darkskywalker is offering. Not everyone is aware of this amazing site and those poor souls need to get good info for their Fetts and if darkskywalker can make a few bucks to put towards his own Fett, I say good for him. Hey, it's not like he was trying to sell the plans here.

UPDATE 7-14-05 - The link to the X LARGE Boba Fett Templates has been added in the first post.


Enjoy

Alan

can someone make a template for a suit about 4'7"

thanks

For 4'7" print out the small templates at 83%, that should get them the right size. If not then send me a PM or e-mail and I'll work you up a set of custom templates.

Alan
wizardofflight@comcast.net

Bumbed for the new folks joining us in this adventure.

Alan

Thank you VERY much for taking the time to do this! :D

Great looking templates, but I have one problem. I tried opening one of the files in Paint, but I'm unable to change the resolution to get the templates to the correct size. Should I try opening them in a different program? And if so, what should I use? Any help is greatly appreciated.

For MS Paint try going to the "File" "Page Setup" in the lower right hand corner set the "Fit to:" 1 page to 1 page. Also right above the "Fit to:" block you will have to reset the margins to .25" on all sides. This should resize the image and allow you to print it on a single page.

If you are still having a problem let me know and I see if I can revise the template to work easier with MS Paint.

Alan

There isn't a "Fit to" option under Page Settings. I'm on Windows 2000, if that matters.

Yes, I see the problem apparently the older versions of paint do not have that option. What size do you need? I will work up a set that is MS Paint compatible for you.

Alan

I'm about 5' 8", so a set of medium armor properly scaled should work for me. I'd appreciate it rather a lot.

Trying to make a Paint compatible file just was not working out way too evolved. But I think I have a solution, I have converted a set of medium sized templates into a PDF file. The test run worked perfectly. So if you have Acrobat all you have to do is print them out and your off and running.[/

If this will work for you just PM me your e-mail address and I send them on over

Alan

Allen,
Thanks so much for your contributions, I'll be doing a Boba Fett costume in '06 ( have TK armor now ) and making the hard armor parts myself will save me alot of cash that I can put towards on a better quality items on other parts of the costume.

Just wanted to let you know how much your time and work is appreciated

:cheers

Link no workie for small armor templates. Anyone already have these that they can shoot over in email? Thanks.

Sorry out of space for the moment. Where would you like me to send them?

Alan

I'm 5"7 and downloaded the medium file, but when I print it it all doesn't come out on one sheet and I also don't know how to get it to 97.1%? If you guys help me and I do get it working how do I trace the templates onto a trash can? Does 5" equal one foot on the scale? Thanks

-JangoFett_21:jango

The armor templates are designed to print out on standard paper. Try using the fit to page option in the print comand of you graphics program. As for printing out to the 97% that will depend on the capabilities of your graphics program. Most programs will allow you to print a various scales.

If you are still having problems let me know and I can send you a PDF file that should clear up th printing issues. My e-mail is wizardofflight@comcast.net

The 5" scale should print out to equal 5" when the templates are printed full size.

Alan

Thanks for the templates!
They are just wonderful!
I was having a heck of a time trying to figure out my cod piece and the template you created was perfect!
Thanks so much!
:cheering

I can't seem to get the "small" templates to download. I was able to get the large (for me) with no problem, but I wanted to try out the small version for my son. Thanks!

Send me a PM with your e-mail and I'll send them right out to you.

Alan

P.S. How tall is your son?

Quote:

---

Originally Posted by Vesper2112

I can't seem to get the "small" templates to download. I was able to get the large (for me) with no problem, but I wanted to try out the small version for my son. Thanks!

---

I just wanted to say thanks for the templates. I've cut them out and they match my son's frame perfectly! I can't wait to get these painted up. :cheering

Your welcome, I glad that they worked out ok. Since we just adopted a three year old litle boy I'll be making a set for him someday so I'd post some pics.

A few other board membeers have reduced the templates down for their kids, but the set I sent you is the first set of child armor that I have done so I am looking forward to seeing how it looks.

Have a great day.

Alan

the templates are very useful, but which one would I ned to use if I'm 5' 7"?

Pm me your e-mail and I send you the 5' 7" templates

Alan

PM sent

Hello everyone, n00b here. Been looking at this site for awhile and decided to join.

These templates are simply amazing. Everything printed out like a dream, exactly to scale.

wizardofflight deserves a medal or something...

Thank you, glad that they are working out for you. Make sure to post pics of your progress.

One thing that I have been meaning to point out is that the slots for the chest display should be cut to match the display that you are planning to use. The slots depicted in the templates won't match up, so please plan a head before you start cutting the slots.

Alan

Bumb for the new crowd.

Alan

Another bumb.

Alan

Could just be me, but everything BUT the small goes to a download, and lucky me... i need the small:lol
so is it just me or is there a problem with the server?

Hello,

I have a number of various small size templates. It has been easier just to send out the right size. How tall are you?

Send me an e-mail with your height to wizardofflight@comcast.net and I will send you the right size.

Alan

Is there a small version available? Seems like the link to the smalls is out of order...
I am making a set for my son (10 years old) for his halloween costume. He is growing like a weed, but is only 4'11" maybe 5'.

dan@dannolan.net

motocrash,

I will work you up a set for 5'. It can't hurt to go a little big for a growing boy. Give me a day or so to resize the templates for you and I send them on over.

Alan

Hey Alan and Dan - cool to see more are jumping in with both feet to make these sets for their kids! :D

Thanks for helping me out and making a new set of templates Wizardofflight! :D

I think the greatest part of making this costume for my son is that he is so excited about Star Wars, and he got that way without (much) prodding from me. He has a friend in town who is into the series, and it has just taken off... movies, video games, and now the costume.

I asked him what he wanted to be for Halloween this year. He was "Elvis" last year, dont know where he got that idea, but I assumed it would be something strange again this year. He said a stormtrooper. I thought cool, and started some internet research into costumes. I found some sites on costume building, and decided to go to Boba Fett instead, but build him a nice set instead of buy some premade thing. I did not tell him, figuring I could surprise him later. He tells a couple days ago that he changed his mind, and would really prefer to be Boba Fett. I have no idea how that happened, I didnt tell him what my plans were.

So I am building the trash can armor set for him, and going to try to scratchbuild a helmet. We will see how things go from there. I still have not told him I am doing it, I will be working on it after he goes to bed at night and when he is at school. I think he is going to be very surprised... and if it turns out nice, it will be like Christmas to me, watching his expression as he gets what he wanted all along. The simple things, right?

The hard part is getting things sized to him, without him realizing what I am doing.

The link doesn't seem to be working..
Could you send the template for a 5'5" to lordodin88@gmail.com ?
Thanks alot!

I'll try to get them out to this weekend.

Alan

Quote:

---

Originally Posted by RBF

:D well that looks awesome, but uhw.... ****... I'm 1 m 87 cm.... wich one do I need?

---

Man, your armor looks perfect the way it is now. Are you going to upgrade.....again????!!! :lol

Thanks, good job man. These should serve me nicely!

I am excited about getting my armor started! Your work came highly recommended by Svoor and Nimad. I fully trust:skull their opinions on Mando matters. Thanks for all your hard work!

the link for the small armor templates doesn't seem to be working
...just thought i'd let you know

Quote:

---

Originally Posted by wizardofflight

motocrash,

I will work you up a set for 5'. It can't hurt to go a little big for a growing boy. Give me a day or so to resize the templates for you and I send them on over.

Alan

---

Could you also send me a set for 5'? You sent me one for 5'5" and it's working out awesome!! Now i've talked my sister into making one since i told her she can get templates for her size and she's excited to make some armor!!!:thumbsup Thanks Alan! You're the Best!!:cheering

jbowdenncic@msn.com

Hi, does anybody know of templates like this for storm / clone troopers ?

is the small template going to come up soon?
i have not been able to view it yet
i am sorry if i have missed this earlier.

-tusken-

Quote:

---

Originally Posted by nepo77

Hi, does anybody know of templates like this for storm / clone troopers ?

---

I have been working on drawings for the clone armor, but because of its complexity there is no way that I can create a set of simple templates. It will require sculpting/carving to be able to create the compound curves.

Sorry,

Alan

Quote:

---

Originally Posted by PelsWick3000

is the small template going to come up soon?
i have not been able to view it yet
i am sorry if i have missed this earlier.

-tusken-

---

I have a number of smaller size templates, but no more room to post them. Please send me an e-mail @ wizardofflight@comcast.net with your height and I will send the templates right out.

Alan

Quote:

---

Originally Posted by wizardofflight

I have been working on drawings for the clone armor, but because of its complexity there is no way that I can create a set of simple templates. It will require sculpting/carving to be able to create the compound curves.

Sorry,

Alan

---

Sounds interesting to me...

Let me know if you go anywhere with this. Even a close approximation would be sweet. I am an admirer of your work and feel the need to say thank you again for bringing this hobby closer to reality for those of us with more time than money.

-x

for some reason the large or the x-large wont work it says bad data found any help would be great

I tried downloading both and had no problem.

If you like I can e-mail them to you to see if that will work?

Send me am e-mail @ wizardofflight@comcast.net

Alan

email sent

For some reason the small temp. will not open for me I do not know maybe its because I am on a mac. Any ideas or should I go to the libary to get on a pc and see if that works. Sorry I'm just lost I would really like to see them.

I tried from my PC to get the small template too- no dice. Says the page does not exist. I wonder if a file got deleted accidentally, or if perhaps the file got moved to a different directory or something.

-Brian

Try sending WizardofFlight a PM with your request and an email he can send it to. Don't forget to ask nicely and include which size. He is good people...

-x

The small templates are no longer on-line I have so many small and x-small sized templates that there was just no more room. Please send me an e-mail at wizardofflight@comcast.net with the size you need and I'll sent thne right out to you.

Alan

eighteendelta - Thank you!

I can host the extras for you if you would like, wizard. I'll PM you my email address to send them to me if you want.

The link to the small armor templates has been update. The ZIP file contain a number of small size armor templates so hopefully you will be able to find a size that will work for you. If not let me know and I work you uo a set.

Thank you phinz for the generous offer to host these templates!!:cheers

Alan

Quote:

---

Originally Posted by phinz

I can host the extras for you if you would like, wizard. I'll PM you my email address to send them to me if you want.

---

Thank you so much for these amazing templates. Even first timers like me can handle cutting out a pattern and matching it. I am doing my sons armor out of foam, as we are monetarily challenged. --This forum is an amazing resource. Thank you wizard of flight.

Oh by the way, any template for clone armor, no matter how simple would help with our other project. We are not as accurate and detailed as the incredible costumers on these boards, as we are beginners, but we just need visuals . . .

thanks again to all of you who take the time to help clueless moms and dads make their kids happy!! It is truly appreciated.

I'm trying to get my XL templates to print to scale. I've been messing around in photo shop for about an hour now. The 'print test page' comes out fine (.25" tall, 5" long), but for some reason the rest won't print with the 5" scale. They are the same .25" tall as the test page, but the lenght of the scale is just shy of 5.25".

Tried Photoshop, Paint, Mozilla, and the Windows picture an fax viewer. All can nail the test page, but the same settings with the armor itself yields the above results....what am I doing wrong?

-Brian

Any updates on the Jango Armor templates? I found someone that is going to laser them for me out of aluminum.

Has anyone else here done that, if so, what gauge did you use? I looked at both 14 & 16 gauge and I personaly thought that the 14 was too thick but don't want it too thin either.

Very impressive. Thank you!

of course, now I feel terribly short (I'm only 5ft 7)