TK-409 Gauntlets done *UPDATED 06/25*

More in-depth explanations added below...
-------------------------------
For cool Flamethrower Nozzels, go to RadioShack.com and search for "Premium PL-259 UHF-Type Coaxial Connector"
-------------------------------
On the left gauntlet, I added the two black buttons on the flamethrower (found at Radio Shack) and wired a blinking red LED to the light switch. I am by no means an electrical expert - I just asked the guy at the parts store how to do it.

http://www.TK409.com/images/fett/armor/gauntlets/13.jpg

http://www.TK409.com/images/fett/armor/gauntlets/12.jpg

------------------------

Here are my gauntlets - finally done! I primered them black first, then RustOleum (American Accents) "Claret Wine" for the burgundy. Silver Testor model paint was used for weathering along with craft paint sponged on to dull the silver a little. On the left gauntlet, I added flamethrower nozzels from Radio Shack "Premium PL-259 UHF-Type Coaxial Connector" (the biggest they sell). Let me know what you think!

http://www.TK409.com/images/fett/armor/gauntlets/1.jpg
http://www.TK409.com/images/fett/armor/gauntlets/6.jpg
Left Gauntlet: I drilled small holes and riveted the main body to the flamthrower housing and screwed the missile to the gauntlet from inside the top shell:
http://www.TK409.com/images/fett/armor/gauntlets/2.jpg
http://www.TK409.com/images/fett/armor/gauntlets/3.jpg

http://www.TK409.com/images/fett/armor/gauntlets/4.jpg
http://www.TK409.com/images/fett/armor/gauntlets/5.jpg

http://www.TK409.com/images/fett/armor/gauntlets/7.jpg
(yes those are Bic pen tips)
http://www.TK409.com/images/fett/armor/gauntlets/8.jpg

On the right gauntlet, I drilled small holes and screws to connect the resin wedge piece to the side. Same thing for the dowel below it.
http://www.TK409.com/images/fett/armor/gauntlets/9.jpg
http://www.TK409.com/images/fett/armor/gauntlets/10.jpg

I superglued velcro to the outer sides of the bottom halves and on the insides of the top halves. Although black velcro was used on the ROTJ MoM exhibit, I believe they used white velcro on the screen used ESB gauntlets.
http://www.TK409.com/images/fett/armor/gauntlets/14.jpg
Reference:
http://200.72.163.179/cdref/0901_1000/Boba_Fett_936.jpg
http://200.72.163.179/cdref/0101_0200/Boba_Fett_145.jpg
http://200.72.163.179/cdref/0101_0200/Boba_Fett_172.jpg

Looking good there, TK!

Great job TK I think I have a pare of the same gauntlets I hope mine turn out as well as yours did :D
Cheers,
ST

hi chris

looking realy good and i love the bic pens you used for the darts.

Paint job looks realy good.

Where did you get the hose conectors from?, as i cant find any in the uk stores ive been too.

cheers

neil
uk-scouthttp://www.uk-scout.co.uk/starwars/starwars20.icoTB7290
www.uk-scout.co.uk
ukbikerscout@hotmail.com
http://www.uk-scout.co.uk/ukscout.gifhttp://www.troopersrus2.8m.com/smallheaderUKPB2.gif
http://www.uk-scout.co.uk/ukscout-webbanner.jpg

Very nice.. Congrats

Quote:

---

ukscout wrote:
Where did you get the hose connectors from?

---

They are brass fittings from the hardware store ($2 each). I painted them with aluminum paint. I can pick some up for you if you want.

- Chris

Gauntlets look great Chris. I like the light up feature. You're fortunate. The last time I went to the Shake in my area the guy took me to the wall with the LED's and told me here what your looking for. I asked if he could help me lay it out (a simple lighting sequence) and we replies: well no, none of us can, but here's everything you need. Would love to see your diagram.

Oh, I forgot about that! Yes, I'll get on it. Look for it sometime Monday.
Thanks!

Those look great Chris, I cant wait to see them in person.
Darren

What's up with the diagram? I wanna see!

Robert :fettrotj

Oops! It's on my home computer. I'll get it soon.

How did you connect the connectors for the hoses to the gauntlets?

those gaunlets are the best i've seen,nice job!

TK409, I got the UHF nozzles 218-188. How did you keep them from making noise since they are made to screw on? Did you glue them?

looks great, definately an inspiration for when I start on mine!

Quote:

---

bobafett669 wrote:
How did you connect the connectors for the hoses to the gauntlets?

---

I used a screw and washer to go through the middle of the hose connectors and into the gauntlet.

Quote:

---

bobafett669 wrote:
TK409, I got the UHF nozzles 218-188. How did you keep them from making noise since they are made to screw on? Did you glue them?

---

I actually can't remember now how I put those on (it's been a while) and unfortunately I can't take apart the gauntlet to have a look. As I remember, it was pretty self explanatory once you unscrew the nozzles to the "open" position. Sorry I can't be more help.

...but thanks for the other compliments :)