Page 1 of 2 12 LastLast
Subscribe
  1. msquared
    Guest
    Jun 16, 2003, 5:50 PM - My scratch built gaunt idea #1

    Tomorrow Im gonna start on my scratch built gauntlets. Heres how I intend on doing them.

    Im gonna cut the syntra in one solid sheet, that fits my forearm. When I mold it I will put a thin piece of wood on the top of my forearm, this will give a flat base for me to start building the bulk of the gauntlets. The two ends of the syntra will meet on the inside of my forearm and be concealed with a loose sheet of syntra to conceal the crack or overlap. From that I will add on blocks of pine wood cut to the basic shape of the bulk. Pretty simple...cuz Im a simple guy.

    What do u guys think? Will it work?

    Also, i painted my chest armor but its so freakin shiney!!! what can i do to dull it down?

    Thanks
  2. Jun 17, 2003, 4:34 AM - Re: My scratch built gaunt idea #2

    I think I follow you. Sounds like you're kind of going for a poorman's vaccuforming without the vaccu part. Just remember to allow for the excess that you'll need after the baseblock's thickness is taken-up.

    As for the shiny....try Dulcote. It's a spraycan thing.
  3. Bountys Hunted's Avatar
    Member Since
    Jun 2002
    Posts
    2,354
    Jun 17, 2003, 8:35 AM - Re: My scratch built gaunt idea #3

    Sounds like you're on your way to custom gauntlets! Look forward to seeing what you come up with!

  4. msquared
    Guest
    Jun 17, 2003, 1:19 PM - Re: My scratch built gaunt idea #4

    thanks guys, I'll post some pics maybe tonight of what i've done.

    poormans...hahaha yes very very poor man's style everything lol
  5. Member Since
    Mar 2002
    Posts
    544
    Jun 21, 2003, 9:40 PM - Re: My scratch built gaunt idea #5

    I think it would be a good idea to make the gauntlets hinge open instead of being stuck. I made mine without a hinge, and it's fine for me, but next time I will put the hinge in.

    Don't forget that you can make the indented squares and other details, too, that are in the wrap-around part of the gauntlets. Cut the holes, then glue another, bigger piece of sintra inside. A little bit of bondo, sand it, and it will look good.

    I have seen others on here make extremely good gauntlets from sintra, so it can be done.
  6. msquared
    Guest
    Jun 21, 2003, 10:56 PM - Re: My scratch built gaunt idea #6

    lol definitely. I am gonna do a clamshell.

    First off the piece that I measured out was way too small so it didnt wrap around my forearm...Im so embarrassed about that. And second, I would cut up my hand eventually sliding it in and out of the gaunt.

    Thanks for the suggestions, hopefully I will have pics up soon.
  7. fett234
    Guest
    Jun 25, 2003, 1:42 PM - Re: My scratch built gaunt idea #7

    For the dulling part, I used some grey primer and misted it. Start a little and work from there.
  8. msquared
    Guest
    Jun 26, 2003, 3:28 PM - Re: My scratch built gaunt idea #8

    cool thanks
  9. Member Since
    Apr 2006
    Posts
    26
    Apr 21, 2006, 12:25 PM - Re: My scratch built gaunt idea #9

    Quote fett234 said:
    For the dulling part, I used some grey primer and misted it. Start a little and work from there.
    You might also wanna try some liquid deglosser. You can find it in the paint department at your friendly neighborhood hardware store. It's used for deglossing gloss paint before repainting walls and such, so that the new layer of paint will bond properly with the old.
  10. Ripcode's Avatar
    Member Since
    Nov 2005
    Posts
    2,268
    Apr 21, 2006, 1:19 PM - Re: My scratch built gaunt idea #10

    Quote mando.wannabe said:
    You might also wanna try some liquid deglosser. You can find it in the paint department at your friendly neighborhood hardware store. It's used for deglossing gloss paint before repainting walls and such, so that the new layer of paint will bond properly with the old.
    Dude...!

    Why are you responding to this post that is almost (2) years old!?!?
  11. formerly joNich
    Member Since
    Dec 2005
    Posts
    589
    Apr 21, 2006, 1:21 PM - Re: My scratch built gaunt idea #11

    This thread is about 3 years old. I don't think that msquared is even around anymore.

    Just keep a heads up on the post date.
  12. fettenvy's Avatar
    Member Since
    Mar 2005
    Posts
    126
    Apr 22, 2006, 3:19 AM - Re: My scratch built gaunt idea #12

    how did you even FIND this post?
  13. Nachtinis's Avatar
    Member Since
    Apr 2006
    Posts
    175
    Apr 24, 2006, 1:26 PM - Re: My scratch built gaunt idea #13

    Oh then lets revitalize.
    My Gauntlets are scratchbuilt.
    Steps:
    1. I cut a plastic pitcher in half and heated them up and formed them.
    2. Left gaunt is formed in legos for the most part and the right one is formed in foamboard.
    3. attach legos and foamboard filling with hightemp hot glue.
    4. Filled in the gaps and some integral curves with joint compound (works better than spackle and has a quick drying time.
    5. Sanded and refilled with more JC, Sanded again.
    6. 3 coats of Polyurethane.
    7. Polyester resin coat, sanded.
    8. Polyester resin coat again, sanded.
    9. Joint compound as the final filler, sand and refill where needed.
    10. Attach bottom halves.
    11. Paint.
    12. Add the little details (switches, darts, etc)...

    MY estimated total cost is probably $30 + my time.
    They wont be accurate, but will look good at sight but not under inspection.
  14. formerly joNich
    Member Since
    Dec 2005
    Posts
    589
    Apr 24, 2006, 1:40 PM - Re: My scratch built gaunt idea #14

    Got any pics?
  15. Ripcode's Avatar
    Member Since
    Nov 2005
    Posts
    2,268
    Apr 24, 2006, 1:48 PM - Re: My scratch built gaunt idea #15

    Quote Nachtinis said:
    joint compound
    You mean like the type they use for drywall?
  16. Nachtinis's Avatar
    Member Since
    Apr 2006
    Posts
    175
    Apr 24, 2006, 2:47 PM - Re: My scratch built gaunt idea #16

    Yeah like drywall, I decided to use it becaus its got an easy clean up and you can spread it with your fingers when its wet. It also sands well. It does crack when it dries sometimes, but when I did the double coat the cracks were also filled in. No pics yet but soon.
  17. Nachtinis's Avatar
    Member Since
    Apr 2006
    Posts
    175
    Apr 24, 2006, 3:04 PM - Re: My scratch built gaunt idea #17







    And I have some other pics of my armor and stuff over here:
    http://images.cosplay.com/gallery.ph...27&member=3632
  18. formerly joNich
    Member Since
    Dec 2005
    Posts
    589
    Apr 24, 2006, 3:51 PM - Re: My scratch built gaunt idea #18

    Wow...most impressive. I'd love to see more pics once you get them painted up. Great job!
  19. Nachtinis's Avatar
    Member Since
    Apr 2006
    Posts
    175
    Apr 24, 2006, 4:07 PM - Re: My scratch built gaunt idea #19

    Hey thanks...

    And for the nit-pickers: I already know they are far from accurate, but I figure Ill make these and see how I like being in them and then I might purchase or sculpt some more accurate ones later. I will however be putting my bang up painting skills to use tho...
  20. Nachtinis's Avatar
    Member Since
    Apr 2006
    Posts
    175
    Apr 28, 2006, 10:21 AM - Re: My scratch built gaunt idea #20

    Mid-painting:
  21. formerly joNich
    Member Since
    Dec 2005
    Posts
    589
    Apr 28, 2006, 10:42 AM - Re: My scratch built gaunt idea #21

    Those aren't too shabby after a coat of paint!
  22. Apr 28, 2006, 12:52 PM - Re: My scratch built gaunt idea #22

    looking real nice man.Good job!!!!
    Let me know how you are going to make the missile cause i did a set of gauntlets out of metal, and i am trying to avoid buying a missile.i would love to know a good method for making a scratch missile.
  23. SarlaccBits's Avatar
    Member Since
    Jan 2006
    Posts
    1,409
    Apr 28, 2006, 1:23 PM - Re: My scratch built gaunt idea #23

    dang...
    nice job.
  24. Nachtinis's Avatar
    Member Since
    Apr 2006
    Posts
    175
    Apr 28, 2006, 3:31 PM - Re: My scratch built gaunt idea #24

    I was planning on basing the missle off of a 7-8" bolt with found items from lowes or home depot. I figure I could probably make due with that. As far as the cones go I might be looking at shower heads, lawn sprinklers, or even cookware. It also might be carved wood parts for the cones.
  25. Apr 29, 2006, 8:34 AM - Re: My scratch built gaunt idea #25

    I think I have a good plan for missiles.Just get a dowel with that diameter, and mold the cone,and the rear part out of epoxy putty.
    That should do the trick.Use a pencil to add the little holes, and strips of lighter wood for the shaft.
    Cheap, and easy, and I will bet that it looks just as good.Even better if I can get a hold of a metal tube with that diameter, then I can get to the hobby store for aluminum peices for the shaft.even better.

Similar Threads

  1. Chest and lid & new gaunt Idea
    By MADDMUDDER in forum Expanded Universe Bounty Hunters
    Replies: 11
    Last Post: May 14, 2009, 7:40 PM
  2. WIP - Scratch Built RF
    By asok in forum Boba Fett Helmet
    Replies: 59
    Last Post: May 7, 2009, 12:24 PM
  3. is scratch built a way to go
    By albertabeeffett in forum Boba Fett Helmet
    Replies: 7
    Last Post: Jan 22, 2006, 10:56 PM
  4. Need help with scratch built
    By kibosh in forum Boba Fett Helmet
    Replies: 5
    Last Post: Nov 29, 2005, 4:44 PM
  5. And another Scratch-Built EE-3 ESB
    By Fried Mon Calamari in forum Boba Fett Costume
    Replies: 9
    Last Post: Nov 13, 2004, 9:28 PM