Discussion on JB project/ FP "NEW" ESB Gauntlets!!!! within the Boba Fett Armor forum, part of the Star Wars Original Trilogy Bounty Hunters category; OK..boys and girls.....here they are ....THE NEW and BEST EVER
OK..boys and girls.....here they are ....THE NEW and BEST EVER FETTPRIDE ESB GAUNTLETS!!!!!!
I cant even begin to say how great these are.....FP you have done a INCREDIBLE JOB on these bad boys!!!!!:thumbup:thumbup:thumbup:thumbup
Enough words...enjoy the pics
Last edited by DarthMiller; 03-08-2008 at 08:22 AM.
I want I want I want I want, awesome thanks for sharing the pics, been waiting to see these for along time!!
And and sign me up FP
By the power of greyskull....!!!
They look awesome.... want...
Good work FP
wow... can't wait till I get some
Yep ,me again, back for another good look
Purdy!
Chris did an amazing job on those gauntlets! I can't wait to see them all painted up!
*sniffs away a tear of pure joy*
Ugghhhh.....Those are pretty much one of the coolest things I have ever seen!!!!! I especially love the improved "screen accurate" closure on the left gaunt. What darts are those on there???? Again, Outstanding!!!!!!
D
stunning!! how do these lock? i think fp mentioned something about a new closure system...?
Anyone want to buy my ESB MoW...
JK,
Imy MoW's
Nice set Chris
Last edited by Sixxgunn13; 03-08-2008 at 10:00 AM.
FettPride,
Beautiful job there my friend..Alex, Be sure an add this little detail before painting.
Again great job !
Best,
Christian
"Got ya sum awful purtty guanlets thar"
What detail?
Originally Posted by Man of War Studios
I *think* that he may be referring to the 3 square looking lights on the front of the tapered section on the right gaunt?
"Got ya sum awful purtty guanlets thar"Sure doo
Very nice work!
VERY VERY nice. I can't wait til they're available. I hope he makes some PP2 gauntlets...just for me
Great Oden's Raven! Those are beautiful!
Nice Gauntlets, I'm also curious to see how they fasten together. my loyalty is with Wickedbeard though. the "metal" Gauntlets he makes are incredible. not to say yours aren't FP but I'm tired of flimsy fiberglass, resin casts that crack when opening them but that's just my opinion. are you guys going to replace the missle and flamethrower with aluminum ones or keep them resin?
Trust me, FP Gauntlets are not Flimsy...anyone who has ever owned a set can attest to that.
Everything you see will remain as is, in terms of the Rocket and Aluminum flame thrower....this one would actually be considered a "Trooping" one as it is made of Rubber (flame thrower).
Again these are very EXCLUSIVE to the JB project...and we will do them the justice they deserve when it comes to painting these bad boys up...so stay tuned.
AND OUTFREAKINSTANDING WORK FP!!!:thumbup...
**On a side note, FP is unable to comment at this time, as he is traveling across country.....Please remember that he is only one person, and his personal life will always come first......I say all this because I know everyone wants a set, But please don't fill his PM box with PM's with Questions, at least not yet
He will answer all your questions very soon. Please be patient.
In the mean time we will be post process pics throughout....
Thank you ALL for your understanding.
Alex
Last edited by Spideyfett; 03-08-2008 at 06:02 PM.
SWEET PONCHATRANE! i hope the rotj versions are available soon! those are beautiful. i've just been given a deadline that i need to have my costume troopable by mid-june! i should pm mow right now about the jet pack. i should start praying to several deities about getting a pair of rubber knees soon too!
DEAR GOD, Chris...and I thought I have seen everything
Can't wait to see these all painted up, Will you be starting these after the helmets done Alex?
Heya Guys ! Thanks a bunch Alex for giving the heads up to TDH for me
Just checking in from my road trip home. I'm still a couple of days away from home (got a late start). I'm in Utah now. Thanks for al your kind comments on these gauntlets !
The great news is the molds are already home
I will do my best to make you guys and gals happy
A couple of notes on the gauntlets -
These are indeed ESB specific. Christian - yes the button detail was sculpted and produced, DM just didn't get it in the initial pictures yet. I'm sure he'll put that up today for all to see. (it's a separate greeblie that was included in a baggie that probably wasn't opened yet)
I also want to note that these particular gauntlets are pre-production. Mr. Bulloch will obviously be the first to do the trial run
The gauntlet attachment method will become evident as this thread matures. I wasn't real crazy about showing that part of it off yet, but I'll leave that up to DM and Spidey. It's not a real big deal, but another "first" none the less. I hope you all like it. Essentially, it streamlines the ease of assembly on a set in "kit" form, while maintaining the traditional "screen accurate" look and feel when assembled. It offers the best of both worlds. they're much harder to cast this way, but worth every extra minute it takes to do it IMO. You'll see
Again, thanks for the kind words and comments! It really means a lot. these things took about a year and a half to get right
Spidey - PM on it's way
FP
Spidey....why make the flamethrower from rubber? To avoid poking someone's eye out while trooping?
here are a few more pics of the attachment set up and the greeblies for the right gaunt
Very Clean..:thumbup
And BEFORE anyone asks, YES these are made to fit Jeremy's forearms for a custom fit.
Fettpride,
I'm so impressed with these new versions you've made..
The detail work on the bottom sections especially. The recessed line work connecting the hex-details is usually overlooked.
These are clearly the definitive gauntlets for future collectors.
Beautiful job FP
Best,
Christian
Nice job FP!!!
Wowsers...great-googly gauntlets! Beautiful work as usual, FP. Count me in.
That sure is one purdy set of gauntlets!!!! Can't wait to see the paint laid down on them
SICK!
jon
That's all I have to say.
*gasp*
Please start a list for the ESB versions and put my name first!!
Hey....is that bic lighter part molded right into the shell?????? Kewl!!!
WOW! New Seeker face with Boba helmet!!!
More pics!
NICE!!!! Would an ROTJ Fett look okay with FP ESB gauntlets???
I think I just wet myself.
Can't really do anything but join the others and start looking for my jaw... I think it went under the sofa... GREAT work indeed.
-Ville
Wow ! Thanks for all the great comments
A few notes about the gauntlets now that I'm home and have more time
I really wanted to post some gallery shots of these at the proper focal length to show off the refined design, but there was very little time before I left. Jason and Alex will post up some better pics soon. I have to wait about a week for my molds and masters to get here. I may do it too when they arrive.
I wanted to take a minute and tip my hat to two members in particular that deserve credit here. The original sculpts that made this possible, were a close collaboration with Brak's Buddy, and Tylerdurden back in the day. I'd really like to thank them for their involvement with these earlier on, as they would not be what they are today without them ! Thanks guys !
A little insight -
They have been completely re-sculpted, and will now be movie specific instead of "unifett"
Gauntlet shell attachment -
The method on these is VERY different from the previous version I made, as well as a first for any set of gauntlets. The idea was to make sure that they were as accurate as possible when assembled. Traditionally, the "accurate" method made for a bear of an assembly. This time around, the assembly can't be any easier, as there are platforms molded into the sculpt that align the bottom shell with the top shell perfectly. And, as a bonus, the section where the hook and loop fasteners are applied (velcro), there is a "track" or "channel" molded into this platform that allows the velcro to reside without popping the shell out outward, allowing for perfect alignment. As with traditional "accurate" assembly, one side of each gauntlet is permanently attached (glued), where is the opposite side of each gauntlet sports the new velcro track attachment. So it's still movie accurate in the "idea" of assembly, just updated so that you do not have to use extra strips of styrene to complete the assembly - because it's all molded in. Remember, you saw it here first
More pics will be posted to help visually clarify what I'm talking about. Some of you have PM'd asking about the attachment method, wanting to retrofit "other makers" gauntlets. This will not be possible, as the integral components for the method on these gauntlets are as I said above, molded into the sculpt.
Size -
Although the particular set pictured in this thread are indeed made for Mr. Bulloch, there are two sizes available
Strength -
There is no reason, that there should ever be a break, or a crack when wearing a set of these gauntlets. Although there have been no reports of anything of this nature in the past with my gauntlets, I wanted to make sure that it is understood, based on a couple of comments that have been made. With the upper shells being made of ultra thick cast reinforced fiberglass, and vacuum formed bottom shells (ABS), it affords just the right flex where needed for the closure method, without the need for hinges and epoxies. The bottom shell does all the flexing. When you open one of these, it can easily be opened to many times it's closed state, without jeopardizing the integrity of either shell or assembly. I have always made it a point, to make my items as accurate as possible. Although metal is way cool, it is simply not even close to accurate. What is accurate then?
It has been agreed upon, and accepted, that most all gauntlets used for Boba Fett in the original trilogy, were vacuum formed. Upper and lower shells. Pictures can be seen in the chronicles, of stark white plastic vac shells laying all over the place. With one exception, it is suspected that the ROTJ left upper shell may be fiberglass, but it is not 100% verified.
The method behind my madness -
Again, trying to balance accuracy, with practicality. Upper vacuum formed shells surely wash out detail. It is suspected that the original shells may have been reverse formed to achieve a sharper appearance. This is not really practical for the private prop maker, as it takes serious horse power to do this. And positive forming, simply washes out the detail to a point that is simply does not look like it's originally intended after forming. The next best alternative, is in fact casting. Be it in resin, or fiberglass (in this case it's fiberlgass) it ensures that the sculpt is accurate, while maintaing practical assembly and durability. So again, the best of both worlds. In short, the materials used are not entirely accurate, but when assembled, and painted, it is as close as reasonably possible. Hybrid if you will. This is the way I've always made them, so there is no epiphany there. But because I have not made them in years, I thought it best to clarify for our newer members.
What you have in the end, is a lightweight, durable component that is surely likely to stand the test of time and abuse of wearing. The original suit was not intended to last. With these, you have as accurate as reasonably possible, with the added benefit of longevity.
When the time comes here in about a week, I'l move all of this info to a *new thread* that will properly gallery the new version of these gauntlets. I just wanted to make sure the information is available now, since there have been a ton of questions.
And one final note, if the new "trooping" flamethrower doesn't trip you trigger, I've recently partnered with *Russrep* to provide a newly designed flamethrower in aluminum as an option
Again, I've made it *HOME*, and am now available again. If there are any other questions, I will answer them as timely as I can. Again, thanks for all the great comments !
And a special thanks to Darthmiller and Spideyfett for posting these up !!
FP
Last edited by fettpride; 03-12-2008 at 11:40 AM.
Wow, thanks for that long explanation Chris. Its good to see you got home nice and safe!
Those are incredible. Can't wait for the "official" thread from Chris. Glad you made it safe to your new home.
Nice job man.
Glad to know your home and safe arlready. Hope the wife is doing good too.
I would say start building one for show and then when completed, send it to me.
Isn't that tradition? why brake it?
I'll send you all the alluminum parts you need to finish it off.
Turo
Wow thanks for the info I cant wait to see these pieces up close (fingers crossed) They really do look fantastic and the attachment method is a great idea, good to see there are size options as well
You did another awesome job
wow, that was a lot to read. very informative as usual fp.
Great detailed description! The thing I love most about the gauntlets is that you didn't choose to make a single shell and replace the flamethrower for ESB/ROTJ, instead you had created them specifically for ESB, something that is rarely ever done.
Chris:thumbup:thumbup:thumbup
Awesome, and when I thought my suit would be done with upgrades
Do you know a price point for these?
tk
Great job on those, got to see them in person and there the best yet.
Those look incredible and the reasoning behind the construction is fantastic. Thanks FP for another great contribution to both the JB project and TDH.
Aluminum flamethrower PICS COMING SOON just finshed boot spike run so I am free to start!
Russ
Any pics of these beauties painted up yet?
Ok Heres my plea: I really think I should be first on the list or at least near the top somewhere. As I have gone round and round, talking to those close, making phone calls, sending pms here and there, aside from god himself, trying to get ahold of Chris for at least 2 years for a set of his gauntlets. I know for a fact I even went to the horses mouth first. Failure.
All of whom I spoke to about them know who you are. Ahem...
I felt like I was trying to catch a greased pig...not that I ever have.
But really Chris, these are beautiful and I'm sure pictures don't do the details justice. I would finally after all my failed efforts, love to have a set.
Pretty please with sugar on top!!!
Now after all that when the time comes I won't have funds just to spite myself
This is the last of what armor I need to complete my 4 year (heck I've lost count) ESB Fett. All I know is I've seen more Fetts completed that were started long after me. Whining session over.
Christi
Hmm FP Gauntlets + RussRep aluminium flamethrower = Fett heaven, cant wait to see these great parts together
Wow Chris...those upgrades sound outstanding
That is soooo cool!!!! Holy cow! Im afraid to try and make my Fett suit nowhaha...
Thought I would post a Teaser pic.....still some painting and weathering to add to help tone down the base color......so please be kind.... and EXCUSE my lighting, sitll learning how to use this camera.. it's making everything so saturated.
and yes the rest is Jeremy's too.
Alex, you really need to learn how to use that camera, cuz it's making the gauntlets look. . . green!
Everyone knows the gauntlets should be red.
Forgot to post the other one...
Left Gauntlet...
Wow Alex.............I, uh..............can I adopt you?
Wow Alex.............I, uh..............can I adopt you?
alrightly. Can you ADOPT me??
Very nice!!
I've always preferred ROTJ Fett, but nothing has ever made me want to do an ESB suit more. Absolutely beautiful!
Some photo tips.
Try to mess with the light settings. Try taking pictures by selecting the Tungsten setting or Flourescent setting. You probably have it on Auto.
it looks like you have flourescent lighting at your house.
I'm no pro, but these setting have worked for me.
check out this pic here
ohh I forgot. Use the timer and no flush. but i'm sure you knew that.
Yeah, I had appeature setting problems...I'm still learning myself...ohh I forgot. Use the timer and no flush. but i'm sure you knew that.
good stuff, thanks Turo.
if you camera has manual white balance, that's the best way (imo) to get perfect color.
shoot a photo of just a white sheet of paper in the lighting you are using. nothing but the paper should show up in viewfinder.
then use that to be the baseline of white. the color should be balanced perfectly to your lighting.
that's what i do with my camera (canon rebel xt)
Beautiful, great job guys
Looking awesome!
FP these are amazing! I can't believe how perfect they look!
I did not want to start a new thread for a simple question, but what would the real part be for the little knobs on the ESB lanyard launcher.I have seen LED's, and what looks to be screws on JB's, and screen pics are very limited.
Any help would be great.
Try Brak's Buddy's Reference CD
Or in the Star Wars Chronicles book, the prepro#1 is there too.....there is a clear shot of them....and they're nobs ...
hope that helps..
ok does anyone have a pic from either of those sources.I do not have either one.Or just tell me what the knobs resemble, and I will take it from there.lol
no matter.I am going to hit the depot, and scour some lookalikes.They kinda resemble allen screws but with a slot based on FP's set.
you're welcome.
Thanks spidey, no rudeness meant, just swift posting lolol.Gotta get these gauntlets done, and these little tidbits drive me nuts.
send me a pm with your email...
Posting Permissions
Reply With Quote
